AI Summary & Key Takeaways
AI InsightThe lattice parameters of the samples change depeding on the external physical effects and the martensite habit planes of alloy were found as (225),, and (259)a considering to external physical effects.
📌 3 Key Takeaways
Abstract
In this study, Fe-31.5%Ni-10%Mn alloy prepared using special methods m TÜBİTAKMAM was investigated. The crystallographic properties of austenite martensite phase transformation created by different external physical effects have been studied with X-rays Laue method. Austenite martensite phase transformaüon in alloy was observed as isothermal and not changed by external physical effects. Experimental resaults showed that the Lath martensit occured on surfaces of the samples. The lattice parameters of the samples change depeding on the external physical effects and the martensite habit planes of alloy were found as (225),, and (259)a considering to external physical effects.
Özet
Bu çalışmada özel metotlar kullanılarak TÜBİTAK-MAM ’da hazırlanan Fe-%31.5Ni- %10Mn alaşımı incelendi Farklı dış fiziksel etkiler ile oluşturulan austenite-martensite faz dönüşümünün kristalografik özellikleri X-ışınlan geri yansımalı Laue metotları ile çalışıldı. Alaşımda austenite-martensite faz dönüşümünün izotermal olduğu ve dış etkiler ile değişmediği görüldü. Numunelerin yüzeyinde Lath türü martensitlerin meydana geldiği gözlendi Numunelerin kristal yapılann örgü parametreleri dış fiziksel etkilere bağlı olarak değiştiği ve alaşımın martensite alışım düzleminin ise dış fiziksel etkilere bağlı olarak (225)a ve (259)a’da olduğu bulundu