SavedAdd your journal

Journals / Journal of Innovative Transportation / 2026 / Volume: 1 Issue: 1

Treatment of hazardous waste engine oil as bitumen modifier for sustainable hot mix asphalt pavement

Ekinhan Erişkin(Süleyman Demirel Üniversitesi)0000-0002-0087-0933
Şebnem Karahançer(ISPARTA UNIVERSITY OF APPLIED SCIENCES)0000-0001-7734-2365
Serdal Terzi(Süleyman Demirel University)0000-0002-4776-824X
Mehmet Saltan(Süleyman Demirel University)0000-0001-6221-4918
Pages
—
Publication Date
2020-07-15
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Because of the paper, WEO could be used in hot mix asphalt for colder regions and the damages giving to the environment could be decreased.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Engine oil is compulsory for vehicle operations and should be replaced with new one in specific periods of time or travel distance.
📊
Key Findings & Data:WEO increases the penetration value while decreasing softening point of the bitumen.
💡
Conclusion & Impact:Because of the paper, WEO could be used in hot mix asphalt for colder regions and the damages giving to the environment could be decreased.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:hazardous · waste engine oil · self-healing

Abstract

Engine oil is compulsory for vehicle operations and should be replaced with new one in specific periods of time or travel distance. Therefore, lots of waste engine oil (WEO) which are very hazardous to the environment is produced every year. Treatment of this waste is very difficult because of the heavy metals in it. In this paper, the usability of WEO in the hot mix asphalt for colder regions is investigated. Softening point and penetration tests have been conducted to WEO modified bitumen to see the change in rheological properties. In addition, Marshall Stability and indirect tensile strength tests have been performed on hot mix asphalt produced with WEO modified bitumen. WEO increases the penetration value while decreasing softening point of the bitumen. Stability results are all above the specification limit, and only specimens compacted with 3% WEO modified bitumen rate ensures the flow and TSR values. Because of the paper, WEO could be used in hot mix asphalt for colder regions and the damages giving to the environment could be decreased.

🔖

Cite This Article

Erişkin, E., Karahançer, Ş., Terzi, S., Saltan, M. (2020). Treatment of hazardous waste engine oil as bitumen modifier for sustainable hot mix asphalt pavement. Journal of Innovative Transportation, Volume: 1 Issue: 1. https://ajindex.com/articles/1509829

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (16)

  1. Gomez-Rico, M. F., Martın-Gullon, I., Fullana, A., Conesa, J. A., & Font, R. (2003). Pyrolysis and combustion kinetics and emissions of waste lube oils. Journal of Analytical and Applied Pyrolysis, 68, 527-546. https://doi.org/10.1016/S0165-2370(03)00030-5
  2. Kuokkanen, T., Perämäki, P., Välimäki, I., & Rönkkömäki, H. (2001). Determination of heavy metals in waste lubricating oils by Inductively Coupled Plasma–Optical Emission Spectrometry. International Journal of Environmental Analytical Chemistry, 81(2), 89-100. https://doi.org/10.1080/03067310108044347
  3. Hamad, A., Al-Zubaidy, E., & Fayed, M. E. (2005). Used lubricating oil recycling using hydrocarbon solvents. Journal of Environmental Management, 74(2), 153-159. https://doi.org/10.1016/j.jenvman.2004.09.002
  4. Mohammed, R. R., Ibrahim, I. A., Taha, A. H., & McKay, G. (2013). Waste lubricating oil treatment by extraction and adsorption. Chemical Engineering Journal, 220, 343-351. https://doi.org/10.1016/j.cej.2012.12.076
  5. Rincon, J., Canizares, P., & Garcia, M. T. (2005). Regeneration of used lubricant oil by polar solvent extraction. Industrial & Engineering Chemistry Research, 44(12), 4373-4379. https://doi.org/10.1021/ie040254j
  6. Rincon, J., Canizares, P., & Garcia, M. T. (2007). Regeneration of used lubricant oil by ethane extraction. The Journal of Supercritical Fluids, 39(3), 315-322. https://doi.org/10.1016/j.supflu.2006.03.007
  7. Rincon, J., Canizares, P., Garcia, M. T., & Gracia, I. (2003). Regeneration of used lubricant oil by propane extraction. Industrial & Engineering Chemistry Research, 42(20), 4867-4873. https://doi.org/10.1021/ie030013w
  8. Asli, H., Ahmadinia, E., Zargar, M., & Karim, M. R. (2012). Investigation on physical properties of waste cooking oil–Rejuvenated bitumen binder. Construction and Building Materials, 37, 398-405. https://doi.org/10.1016/j.conbuildmat.2012.07.042
  9. Eriskin, E., Karahancer, S., Terzi, S., & Saltan, M. (2017). Waste frying oil modified bitumen usage for sustainable hot mix asphalt pavement. Archives of Civil and Mechanical Engineering, 17(4), 863-870. https://doi.org/10.1016/j.acme.2017.03.006
  10. Zargar, M., Ahmadinia, E., Asli, H., & Karim, M. R. (2012). Investigation of the possibility of using waste cooking oil as a rejuvenating agent for aged bitumen. Journal of Hazardous Materials, 233, 254-258. https://doi.org/10.1016/j.jhazmat.2012.06.021
  11. Wen, H., Bhusal, S., & Wen, B. (2013). Laboratory evaluation of waste cooking oil-based bioasphalt as an alternative binder for hot mix asphalt. Journal of Materials in Civil Engineering, 25(10), 1432-1437. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000713
  12. Chen, M., Leng, B., Wu, S., & Sang, Y. (2014). Physical, chemical and rheological properties of waste edible vegetable oil rejuvenated asphalt binders. Construction and Building Materials, 66, 286-298. https://doi.org/10.1016/j.conbuildmat.2014.05.033
  13. Su, J. F., Qiu, J., Schlangen, E., & Wang, Y. Y. (2015). Investigation the possibility of a new approach of using microcapsules containing waste cooking oil: In situ rejuvenation for aged bitumen. Construction and Building Materials, 74, 83-92. https://doi.org/10.1016/j.conbuildmat.2014.10.018
  14. DeDene, C. D., & You, Z. (2014). The performance of aged asphalt materials rejuvenated with waste engine oil. International Journal of Pavement Research & Technology, 7(2), 145-152. https://doi.org/10.6135/ijprt.org.tw/2014.7(2).145
  15. GDH. (2013). Highway Technical Specifications. Turkey General Directorate of Highways, Ankara.
  16. Tabakovic, A., & Schlangen, E. (2015). Self-Healing Technology for Asphalt Pavements. In: Hager M., van der Zwaag S., Schubert U. (eds) Self-healing Materials. Advances in Polymer Science (pp 285-306). https://doi.org/10.1007/12_2015_335