SavedAdd your journal

Journals / Journal of Energy Systems / 2026 / Volume: 3 Issue: 3

A power circuit design for the poloidal field coils in a torus shaped plasma system

Bekir Dursun(TRAKYA UNIVERSITY)0000-0002-7741-8873
Erol Kurt(Gazı University)0000-0002-3615-6926
Mehmet Tekerek(Kahramanmaras Sütcü Imam University)0000-0001-6112-3651
Pages
—
Publication Date
2019-09-30
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

It has been proven that the designed system can produce an almost dc current with 66 V fluctuation, which is under the limit of 6%, considering the high voltage of 1kV.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:An initial design for a power circuit of a new plasma system is proposed and implemented in MatLab code.
📊
Key Findings & Data:This poloidal coil structure ignites an electrical field inside the chamber and that yields to a circular magnetic field inside the plasma.
💡
Conclusion & Impact:It has been proven that the designed system can produce an almost dc current with 66 V fluctuation, which is under the limit of 6%, considering the high voltage of 1kV.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Poloidal field · Plasma · Converter

Abstract

An initial design for a power circuit of a new plasma system is proposed and implemented in MatLab code. The plasma device is a torus and requires an excitement of wires, which are wrapped around the torus for a toroidal field and a poloidal field coil placed at the outer part of the device. This poloidal coil structure ignites an electrical field inside the chamber and that yields to a circular magnetic field inside the plasma. The proposed electrical design for this poloidal field equipment has some components including the alternating current unit and the direct current one. The circuit first uses an ac-dc converter, in order to transfer the ac grid to the dc one. Then it uses a switching scheme and a discharge circuit. The operation voltages for the poloidal field are estimated to be 1 kV, respectively. It has been proven that the designed system can produce an almost dc current with 66 V fluctuation, which is under the limit of 6%, considering the high voltage of 1kV.

🔖

Cite This Article

Dursun, B., Kurt, E., Tekerek, M. (2019). A power circuit design for the poloidal field coils in a torus shaped plasma system. Journal of Energy Systems, Volume: 3 Issue: 3. https://doi.org/10.30521/jes.609667

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (12)

  1. Bizon N, Lopez-Guede JM, Kurt E, Thounthong P, Mazare AG, Ionescu LM, Iana G., Hydrogen economy of the fuel cell hybrid power system optimized by air flow control to mitigate the effect of the uncertainty about available renewable power and load dynamics. Energy Conversion and Management, 2019, 179, 152-165.
  2. Srilatha B, Sinha AK., Design of pulsed power system for fusion reactor, International Conference on Power Systems, Kharagpur, 2009, 1-6. DOI: 10.1109/ICPWS.2009.5442709
  3. Akgün Y, Bölükdemir AS, Kurt E, Öncü T, Alaçakir, A., Preliminary plasma focus studies at ODAK-3K device using track detectors. Plasma Devices Operations, 2009, 17(4), 293-300.
  4. Hora H, Miley GH, Ghoranneviss M, Malekynia B, Azizi N, He XT., Fusion energy without radioactivity: laser ignition of solid hydrogen–boron (11) fuel. Energy & Environmental Science, 2010, 3(4), 478-485.
  5. Benfattol I, Mondinol PL, Roshall A, Coletti A, Hrabal D, Maschio A, Piovan R, Tencod S, Bulgakov S, Kuchinski V., AC/DC Converters for the ITER Poloidal Field System. Proceedings of 16th International Symposium on Fusion Engineering. Champaign, IL, USA, 1995, 1, 658-661 DOI: 10.1109/fusion.1995.534310.
  6. Mondino PL. The ITER tokamak and its power supply, Proceedings of the International Power Electronics Conference, Yokohama, 1995, 869–874.
  7. Yue, L., Lee, I., and Yao, X., Tokamak vertical stability coil power supply based on modular multilevel converter, IEEE International Power Modulator and High Voltage Conference (IPMHVC), San Francisco, CA, 2016, 447-452. DOI: 10.1109/IPMHVC.2016.8012870
  8. Kiguchi, R., and Nishida, Y., Boost DC-DC Converter Cascade System for High Boost-Rate Application, International Conference on Smart Grid (icSmartGrid), Nagasaki, Japan, 2018, 283-286. DOI: 10.1109/ISGWCP.2018.8634483
  9. Isobea T, Takakua T, Munakataa T, Tsutsuia H, Tsuji-Iioa S, Matsukawab T, Shimadaa R., Fusion Power Supplies using Magnetic Energy Recovery Switch, 21st IEEE/NPS Symposium on Fusion Engineering SOFE 05, Knoxville, TN, 2005, 1-4. DOI: 10.1109/FUSION.2005.252988
  10. Chikaraishi, H., Extra-low-voltage DC power supply for superconducting coil using piezoelectric-actuator-driven mechanical contact, 19th European Conference on Power Electronics and Applications (EPE'17 ECCE Europe), Warsaw, 2017, 1-8. DOI: 10.23919/EPE17ECCEEurope.2017.8098947
  11. Cockcroft John Douglas, Walton E. T. S. and Rutherford Ernest Experiments with high velocity positive ions.―(I) Further developments in the method of obtaining high velocity positive ions, Proc. R. Soc. Lond. A, 1932, 136(830), 619. DOI: 10.1098/rspa.1932.0107
  12. Öndin U., Design of high frequency high voltage DC-DC converter (Unpublished Master Thesis). Institute of Natural and Applied Sciences, Gebze Technical University, 2009, Turkey.