Journals / Çukurova Üniversitesi Mühendislik-Mimarlik Fakültesi Dergisi / 2020 / Cilt: 35 - Sayı: 3

Effect of BN Addition on the Mechanical Properties of B4C/Al Hybrid Composites Produced via Squeeze Casting Method

BN İlavesinin Sıkıştırma Döküm Yöntemi ile Üretilen B4C/Al Hibrit Kompozitlerin Mekanik Özellikleri Üzerine Etkileri

Pages
669–678
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

In order to determine the effect of BN addition on the mechanical properties hardness measurements were conducted and the yield and ultimate tensile strengths and per cent elongation values were determined by tensile testing and results were compared

📌 3 Key Takeaways

🎯
Objective & Hypothesis:n this study, effects of boron nitride (BN) addition on the mechanical properties of boron carbide reinforced (B4C) aluminum (Al) composites were investigated. 3, 5 and 10 wt. %BN were added to Al matrix composites reinforced with 5% B4C and melts were cast by squeeze casting technique under 75 MPa casting pressure to produce BN-B4C/Al hybrid composites.
📊
Key Findings & Data:Control samples were prepared without any BN and B4C addition for comparison purposes and effect of BN and B4C addition on the density and chip lengths of the produced materials were obtained.
💡
Conclusion & Impact:In order to determine the effect of BN addition on the mechanical properties hardness measurements were conducted and the yield and ultimate tensile strengths and per cent elongation values were determined by tensile testing and results were compared
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

n this study, effects of boron nitride (BN) addition on the mechanical properties of boron carbide reinforced (B4C) aluminum (Al) composites were investigated. 3, 5 and 10 wt. %BN were added to Al matrix composites reinforced with 5% B4C and melts were cast by squeeze casting technique under 75 MPa casting pressure to produce BN-B4C/Al hybrid composites. Control samples were prepared without any BN and B4C addition for comparison purposes and effect of BN and B4C addition on the density and chip lengths of the produced materials were obtained. In order to determine the effect of BN addition on the mechanical properties hardness measurements were conducted and the yield and ultimate tensile strengths and per cent elongation values were determined by tensile testing and results were compared

Özet

Yürütülen çalışma kapsamında, bor nitrür (BN) ilavesinin bor karbür (B4C) ile güçlendirilmiş alüminyum (Al) kompozitlerinin mekanik özellikleri üzerindeki etkileri incelenmiştir. Ağırlıkça %5 B4C katkılı olarak hazırlanan alüminyum matriks kompozit malzemelere ağırlıkça %3, %5 ve %10 BN ilave edilerek ve 75 MPa basınç altında sıkıştırma döküm yöntemi ile döküm işlemi gerçekleştirilerek BN-B4C/Al hibrit kompozit malzeme üretilmiştir. Kontrol ve karşılaştırma amacıyla, BN ve B4C ilavesi olmaksızın alüminyumdan elde edilen numuneler kullanılmış; BN ve B4C ilavesinin üretilen malzemelerin yoğunlukları üzerine etkileri ve ortalama talaş uzunlukları incelenmiştir. BN katkısının mekanik özellikler üzerindeki etkisini belirlemek amacıyla, sertlik ölçümleri gerçekleştirilmiş; malzemelerin akma dayanımları, çekme dayanımları ve yüzde uzama miktarları çekme testi yardımıyla belirlenmiş ve karşılaştırılmıştır

🔖

Cite This Article

İPEKOĞLU, M., NEKOUYAN, A., ALBAYRAK, Ö., ALTINTAŞ, S. (2020). Effect of BN Addition on the Mechanical Properties of B4C/Al Hybrid Composites Produced via Squeeze Casting Method. Çukurova Üniversitesi Mühendislik-Mimarlik Fakültesi Dergisi, Cilt: 35 - Sayı: 3, 669–678. https://ajindex.com/articles/150331

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (15)

  1. Kainer, K.U., 2006. Metal Matrix Composites. Custom-made Materials for Automotive and Aerospace Engineering. Wiley-VCH Verlag GmbH & Co., KGaA, Weinheim
  2. Kim, Y.H., Lee, S., Kim, N.J., 1992. Fracture Mechanisms of a 2124 Aluminum Matrix Composite Reinforced with SiC Whiskers. Metallurgical and Materials Transactions A, 23(9), 2589-2596
  3. Song, W.Q., Krauklis, P., Mauritz, A.P., Bandyopadhyay, S., 1995. The Effect of Thermal Aging on the Abrasive Behaviour of Age-hardening 2014 Al/SiC and 6061 Al/SiC Composites. Wear, 185(1-2), 125-130
  4. Chawla, N., Chawla, K.K., 2006. Metal Matrix Composites, Springer, New York
  5. Koli, D.K., Agnihotri, G., Purohit, R., 2015. Advanced Aluminium Matrix Composites: The Critical Need of Automotive and Aerospace Engineering Fields. Materials Today: Proceedings, 2(4-5), 3032-3041
  6. Surappa, M.K., 2003. Aluminium Matrix Composites: Challenges and Opportunities. Sadhana, 28(1-2), 319-334
  7. Ramnath, V., Elanchezhian, C., Annamalai, R.M., Aravind, S., Ananda Atreya, T.S., Vignesh, V., Subramanian, C., 2014. Aluminium Metal Matrix Composites - A Review. Reviews on Advanced Materials Science, 38(1), 55-60
  8. Macke, A., Schultz B.F., Rohatgi, P., 2012. Metal Matrix Composites Offer the Automotive Industry an Opportunity to Reduce Vehicle Weight, Improve Performance. Advanced Materials and Processes, 170(3), 19-23
  9. European Aluminium, 2020. https://www. european-aluminium.eu/about-aluminium/, 09 Mayıs 2020
  10. Pandey, A.B., 1992. Metallic Matrices. In: Miracle, D.B., Donaldson, L. (eds), ASM Handbook Vol
  11. ASM International, Metals Park, A.B.D., 396-402
  12. Wang, Y., Lei, K., Ruan, Y., Dong, W., 2016. Microstructure and Wear Resistance of cBN/Ni–Cr–Ti Composites Prepared by Spark Plasma Sintering, International Journal of Refractory Metals and Hard Materials, 54, 98-103
  13. Harichandran, R., Selvakumar, N., 2016. Effect of Nano/micro B4C Particles on the Mechanical Properties of Aluminium Metal Matrix Composites Fabricated by Ultrasonic Cavitation-Assisted Solidification Process. Archives of Civil and Mechanical Engineering, 16(1), 147-158
  14. Kim, S.-B. Kim, Koss, D.A., Gerard, D.A., 2000. High Cycle Fatigue of Squeeze Cast Al/SiCw Composites. Materials Science and Engineering: A, 277(1-2), 123-133
  15. Ozben, T., Kilickap, E., Cakır, O., 2008. Investigation of Mechanical and Machinability Properties of SiC Particle Reinforced AlMMC. Journal of Materials Processing Technology, 198(1-3), 220-225. 15.Chen, K.