Journals / Electrica / 2019 / Cilt: 19 - Sayı: 1

Detection of Structural Vibration-Induced Noises with Modal Analysis in Diesel Generators

Journal
Electrica
Pages
72–84
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

As a result of these studies, it was shown by computer-aided modal analysis that the high noise occurring in diesel generators can be determined by the coherence tests.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Diesel generators are one of the most common used energy sources for maintaining the continuity of electrical energy.
📊
Key Findings & Data:There are many methods of eliminating the noise problems that diesel generators generate during energy production.
💡
Conclusion & Impact:As a result of these studies, it was shown by computer-aided modal analysis that the high noise occurring in diesel generators can be determined by the coherence tests.
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Özet

Diesel generators are one of the most common used energy sources for maintaining the continuity of electrical energy. Diesel generators cause high noises during their operation. There are many methods of eliminating the noise problems that diesel generators generate during energy production. However, these methods show differences according to the type of noise source. In this study, the problem of noise was emphasized that it is caused by structural vibrations of diesel generators. Therefore, the method of coherence function, which is an analytical method, was used for the detection of noise caused by structural vibrations. A test software and user interface was developed to perform sound and vibration measurement and analysis with using coherence function. The coherence analysis of sound and vibration data was made by performing various tests and measurements with the developed test software. In the coherence tests of diesel generator, the vibration frequencies that cause high noise at the measurement points were determined. In order to verify the coherence tests, the computer-aided 3D solid model of diesel generator used in the tests was created. Computer-aided modal analysis of the diesel generator was performed by using this model. The modal analysis was performed at the vibration measurement points and the frequencies that cause high noise. Coherence test results and modal analysis results were compared. It was seen that the results of the coherence measurement and the results of the computer-aided modal analysis supported each other. As a result of these studies, it was shown by computer-aided modal analysis that the high noise occurring in diesel generators can be determined by the coherence tests.

🔖

Cite This Article

ÖLMEZ, U., BAYHAN, N., DOĞAN, H., UYSAL, M. (2019). Detection of Structural Vibration-Induced Noises with Modal Analysis in Diesel Generators. Electrica, Cilt: 19 - Sayı: 1, 72–84. https://ajindex.com/articles/149930

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (3)

  1. K. B. Howell, “Fourier Series”, in Principles of Fourier Analysis, Boca Raton, USA: Chapman & Hall/CRC, 2001, ch. 2, pp. 93-242. [CrossRef] J. W. Cooley, J. W. Tukey, “An algorithm for the machine calculation of complex fourier series”, Mathematics of Computation, vol. 19, no. 90, pp. 297-301, Apr, 1965. [CrossRef] M. J. Crocker, J. F. Hamilton, “Modelling of diesel engine noise using coherence”, SAE Transactions, vol. 88, no 2, pp. 1263-1273, 1979.
  2. M. J. Crocker, G. Anderkay, J. Y. Chung, “Controlling the noise radiated from diesel engines”, Proceeding of First Interagency Symposium on Transportation Noise Research, California, USA, 28-30 March 1973, pp. 631-647.
  3. Q. Leclere, J. Doruet, E. Parizet, “Extraction and analysis of diesel engine combustion noise”, Proceedings of Exploratory Workshop on Modern Methods of Vibro-Acoustic Study with Application to Automative, Pitesti, Romania, 2011, pp. 37-43. S. Narayan, “A review of diesel engine acoustics”, FME Transactions, vol. 42, no. 2, pp. 150-154, 2014. [CrossRef] L. Lamula, K. Saine, K. Saarinen, J. Hyrynen, “Cylinder pressure generated noise of medium speed diesel engine”, Joint Baltic-Nordic Acoustics Meetings, Reykjavik, Iceland, 17-19 Aug, 2008. K.W. Goff, “The application of correlation techniques to some acoustic measurements”, J Acoust Soc Am, vol. 27, no. 2, pp. 336-346, 1955. [CrossRef] S. Kumar, N.S. Srivastava, “Investigation of noise due to structural vibrations using a cross-correlation technique”, J Acoust Soc Am, vol. 57, no. 4, pp. 769-772, 1975. [CrossRef] T. Pazara, M. Pricop, I. C. Scurtu, C. Pricop, O. Radu, “Defect identification of moving parts of a mechanical installation using correlation between vibration and noise”, Scientific Bulletin of Naval Academy, vol. 19, no. 2, pp. 504-509, 2016. J. Lukic, “An approach to an NVH investigation of vehicle hydrolic pumps”, Journal of Low Frequency Noise Vibration and Active Control, vol. 30, no. 2, pp. 137-147, 2011. [CrossRef] P. J. Carrato, C. C. Fu, “Modal analysis techniques for torsional vibration of diesel crankshafts”, SAE Transactions, vol. 95, no. 4, pp. 955-963, 1986. [CrossRef] J. Meng, Y. Liu, and R. Liu, “Finite element analysis of 4-cylinder diesel crankshaft”, IJIGSP, vol. 3, no. 5, pp. 22-29, 2011. [CrossRef] F. J. Espadafor, J. B. Villanueva, M. T. Garcia, E. C. Trujillo, “Analysis of a diesel generator cylinder failure”, Engineering Failure Analysis, vol. 17, no. 4, pp. 913-925, 2010. [CrossRef] S. Z. Jiang, W. B. Yan, “FEM