Journals / International Journal of Computational and Experimental Science and Engineering / 2026 / Cilt: 5 Sayı: 2

Unimodal Optimization of Axially Compressed Shear Deformable Columns

İzzet Ufuk Çagdaş(AKDENIZ UNIVERSITY, FACULTY OF ENGINEERING, DEPARTMENT OF CIVIL ENGINEERING)0000-0002-2528-2978
Pages
100–104
Publication Date
2019-07-31
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The results presented show that the optimization results are more reliable than the ones obtained using classical beam theory as cross-sectional area does not vanish at points where the bending moment is equal to zero.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, the unimodal optimality conditions for axially compressed shear deformable columns are formulated and the optimal design problems defined are numerically solved using an iterative procedure based on the finite element method.
📊
Key Findings & Data:In this study, the unimodal optimality conditions for axially compressed shear deformable columns are formulated and the optimal design problems defined are numerically solved using an iterative procedure based on the finite element method.
💡
Conclusion & Impact:The results presented show that the optimization results are more reliable than the ones obtained using classical beam theory as cross-sectional area does not vanish at points where the bending moment is equal to zero.
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:Optimal column · shear deformation · optimality condition

Abstract

In this study, the unimodal optimality conditions for axially compressed shear deformable columns are formulated and the optimal design problems defined are numerically solved using an iterative procedure based on the finite element method. The results presented show that the optimization results are more reliable than the ones obtained using classical beam theory as cross-sectional area does not vanish at points where the bending moment is equal to zero.

🔖

Cite This Article

Çagdaş, İ. U. (2019). Unimodal Optimization of Axially Compressed Shear Deformable Columns. International Journal of Computational and Experimental Science and Engineering, Cilt: 5 Sayı: 2, 100–104. https://doi.org/10.22399/ijcesen.591907

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (11)

  1. . C.M. Wang, C.Y. Wang, J.N. Reddy, ‘Exact Solutions for buckling of structural members’, CRC Press, Florida, USA, 2005.
  2. . M.J. Maurizi, P.M. Belles, Comments on ‘The effect of shear deformations on the critical buckling of columns’. Journal of Sound and Vibration, 185:5, 908-909, 1995.
  3. . J.B. Kosmatka, An improved two-node finite element for stability and natural frequencies of axial-loaded timoshenko beams. Computers & Structures, 57:1, 141-149, 1995.
  4. . J.R. Banarjee, F.W. Williams, The effect of shear deformation on the critical buckling of columns. Journal of Sound and Vibration, 174:5, 607-616, 1994.
  5. . C.M. Wang, R.P.S. Han, A further note on the effect of shear deformation on the critical buckling of columns. Journal of Sound and Vibration, 185:5, 895-896, 1995.
  6. . Cagdas, I. U., & Adali, S. Optimization of clamped columns under distributed axial load and subject to stress constraints. Engineering Optimization, 39(4), 453-469, 2007.
  7. . Adali, S., & Cagdas, I. U. Optimal design of simply supported columns subject to distributed axial load and stress constraint. Optimal Control Applications and Methods, 30(5), 505-520, 2009.
  8. . Cagdas, I. U., & Adali, S. Optimal shapes of clamped–simply supported columns under distributed axial load and stress constraint. Engineering Optimization, 45(2), 123-139, 2013.
  9. . H. Ziegler, Arguments for and against Engesser’s buckling formulas. Ingenieur-Archiv, 52, 105-113, 1982.
  10. . Haichang Hu, Variational Principles of Theory of Elasticity with Applications. Gordon and Breach, Science Publishers Inc., NY, 1984.
  11. . Hinton E, Owen D.P., Finite element programming. AW Billitt, Droitwich, 1977.