AI Summary & Key Takeaways
AI InsightThese preliminary tests showed that the practical implementation of tracer gas techniques in HVAC systems for measuring air-flow rates with a very short mixing distance is possible with the devices developed.
📌 3 Key Takeaways
Özet
One of the most feasible ways to measure duct airflows is by tracer gas techniques, especially for complex situations when the duct lengths are short as well as their ac-cess, which makes extremely difficult or impossible other methods to be imple-mented. One problem associated with the implementation of tracer gas technique when the ducts lengths are short is due to the impossibility of achieving complete mixing of the tracer with airflow and its sampling. In this work, the development of a new device for the injection of tracer gas in ducts is discussed as well as a new tracer-sampling device. The developed injection device has a compact tubular shape, with magnetic fixation to be easy to apply in duct walls. An array of sonic micro jets in counter current direction, with the possibility of angular movement according to its main axle ensures a complete mixing of the tracer in very short distances. The tracer-sampling device, with a very effective integration function, feeds the sampling system for analysis. Both devices were tested in a wind tunnel of approximately 21m total length. The tests distances between injection and integration device considered were: 𝑋𝐷ℎ=22 ⁄; 𝑋𝐷ℎ=4 ⁄; 𝑋𝐷ℎ=2 ⁄; and 𝑋𝐷ℎ=1⁄. For very short distances of 𝑋𝐷ℎ=2 ⁄ and 𝑋𝐷ℎ=1⁄, semi empirical expressions were needed. A good repro-ducibility of airflow rate values was obtained. These preliminary tests showed that the practical implementation of tracer gas techniques in HVAC systems for measuring air-flow rates with a very short mixing distance is possible with the devices developed.