Journals / AURUM Mühendislik Sistemleri ve Mimarlık Dergisi / 2020 / Cilt: 4 Sayı: 2

Experimental Study the Influence of Surface Shape and Roughness of Different Materials on Thermal Contact Conductance in Single and Multilayers Wall

Farklı Malzemelerin Yüzey Şekli ve Pürüzlülüğünün Termal Temas İletkenliğine Etkisi İçin Deneysel Bir Çalışma

Laıth Awad(Altınbaş University)0000-0001-5954-2531
İbrahim Koç(Altınbaş University)0000-0002-1379-7093
Salah Jawad(University of Technology)0000-0002-2875-1450
Pages
185–199
Publication Date
2020-12-30
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The results showed the efficiency and effectiveness of extended surfaces and their effect in enhancing heat transfer.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:This paper presents an experimental study, the purpose of which is to know the effect of surface shape on the thermal contact conductance of two solid specimens bonded to each other.
📊
Key Findings & Data:The experimental results found variations in temperature distribution due to the difference in surface form, by which the aluminum thermal conductivity can be measured at various temperatures ranging from 100oC to 300oC.
💡
Conclusion & Impact:The results showed the efficiency and effectiveness of extended surfaces and their effect in enhancing heat transfer.
🔬Design:Araştırma Makalesi
📍Scope:Comprehensive Sample
⚙️Variables:Termal iletkenlik · Termal temas iletkenliği · Termal temas direnci

Abstract

This paper presents an experimental study, the purpose of which is to know the effect of surface shape on the thermal contact conductance of two solid specimens bonded to each other. The experiment was carried out by placing copper and aluminum specimens in an electric furnace, isolating the surroundings of these specimens and measuring the temperatures at the contact surfaces of the samples. The aluminum specimens used in this study have different surfaces (some specimens have extended surfaces). The experimental results found variations in temperature distribution due to the difference in surface form, by which the aluminum thermal conductivity can be measured at various temperatures ranging from 100oC to 300oC. The results showed the efficiency and effectiveness of extended surfaces and their effect in enhancing heat transfer.

Özet

Bu makale, birbirine temas eden iki katı numunenin, yüzey şeklinin ısıl temas iletkenliği üzerindeki etkisini bulmayı amaçlayan deneysel bir çalışmayı sunar. Deney, bakır ve alüminyum numuneleri bir elektrikli fırına yerleştirerek, bu numunelerin çevresini izole ederek ve numunelerin temas yüzeylerindeki sıcaklıkları ölçülerek gerçekleştirilmiştir. Bu çalışmada kullanılan alüminyum numunelerin farklı yüzeyleri vardır (bazı numuneler geniş yüzeylere sahiptir). Deneysel sonuçlar, yüzey formundaki farklılığa bağlı olarak sıcaklık dağılımında farklılıklar buldu; bu sayede alüminyum termal iletkenlik 100°C ila 300°C arasında değişen çeşitli sıcaklıklarda ölçülebilir. Sonuçlar, uzatılmış yüzeylerin verimliliğini ve etkililiğini ve ısı transferini artırmadaki etkilerini gösterdi.

🔖

Cite This Article

Awad, L., Koç, İ., Jawad, S. (2020). Experimental Study the Influence of Surface Shape and Roughness of Different Materials on Thermal Contact Conductance in Single and Multilayers Wall. AURUM Mühendislik Sistemleri ve Mimarlık Dergisi, Cilt: 4 Sayı: 2, 185–199. https://ajindex.com/articles/1456437

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (15)

  1. Cengel, Y.A. 2006. Heat Transfer: A Practical Approach, Second edi. 37(9), 61–65.
  2. Fontenot, R. S., V.K. Mathur, and J.H. Barkyoumb. 2018. New photothermal deflection technique to discriminate between heating and cooling. Journal of Quantitative Spectroscopy and Radiative Transfer 204, 1-6.
  3. Hilgert, C., F. Howar, and M. Röger. 2019. Flow through calorimeter to measure fluid heat capacity in CSP applications. Solar Energy, 194, 804-814.
  4. Ho, C.Y., R.W. Powell, and P.E. Liley. 1968. Thermal Conductivity of Selected Materials Part 2. U.S. Department of Commerce, National Bureau of Standards, Washington, 168.
  5. Hollar, C., A. Fleming, K. Davis, R. Budwig, C. Jensen, and D. Estrada. 2019. A parametric study for in-pile use of the thermal conductivity needle probe using a transient, multilayered analytical model. International Journal of Thermal Sciences, 145, 106028.
  6. Holman, J. P. 2008. Useful Conversion Factors, Heat Transfer Tenth ed., McGraw Hill, New York.
  7. Incropera, F.P. 2011. Fundamentals of heat and mass transfer, Seventh ed., New York.
  8. Jeon, S.W., Ngo, I., and Byon, C. 2016. Numerical study on heat transfer performance of wavy fins with different geometries 40(11), 737–744.
  9. Kerschbaumer, R. C, S. Stieger, M. Gschwandl, T. Hutterer, M. Fasching, B. Lechner, L. Meinhart, J. Hildenbrandt, B. Schrittesser, P F. Fuchs, G.R. Berger and W. Friesenbichler. 2019. Comparison of steady-state and transient thermal conductivity testing methods using different industrial rubber compounds. Polymer Testing, 80, 106121.
  10. Lee, J.S., K.S. Kim, and Y. Kim. 2018. Development of an insulation performance measurement unit for full-scale LNG cargo containment system using heat flow meter method. International Journal of Naval Architecture and Ocean Engineering 10(4), 458–467.
  11. Liu, Y., M. Yu, Y. Tian, and Q. Qin. 2017. Study of thermal conductivity measurement accuracy of wet porous media. Procedia Engineering, 205, 1755–1761.
  12. Patle, S.D. 2006. Analysis and measurement of thermophysical properties by temperature oscillation. National Institute Of Technology Rourkela, India, 1–135.
  13. Sahu, M., G.C. Sahu, M. Sao, and A.K. Jain. 2018. Analysis of Heat Transfer From Fins Using Finite Difference Method, International Journal Of Advance Research, Ideas And Innovations In Technology, 4(1), 261–269.
  14. Tariq, A., and M. Asif. 2016. Experimental investigation of thermal contact conductance for nominally flat metallic contact, Heat Mass Transf. und Stoffuebertragung 52(2), 291–307.
  15. Incropera, F.P. 2011. Fundamentals of heat and mass transfer, Seventh ed., New York.