SavedAdd your journal

Journals / ACADEMIC PLATFORM-JOURNAL OF ENGINEERING AND SCIENCE / 2018 / Cilt: 6 - Sayı: 1

Chromium(VI) Removal From Aqueous Solutions by Chitosan Coated Banan Peel Beads

Kitosan Kaplı Muz Kabuğu Boncukları ile Sulu Çözeltilerden Krom(VI) Giderimi

ŞERİFE PARLAYICI
Pages
40–48
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Results showed that CBP is favourable adsorbent for the adsorption of Cr(VI) ions.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, the performance of a cross-linked chitosan coated banana peel (CBP), which has been cross-linked with glutaraldehyde, has been investigated for the adsorption of Cr(VI) ions from aqueous solutions.
📊
Key Findings & Data:The concentration of Cr(VI) in residual solution was identified by a UV-Vis spectrophotometer using a diphenylcarbazide reagent. pH 2.0 was found to be an optimum pH for Cr(VI) adsorption onto CBP beads.
💡
Conclusion & Impact:Results showed that CBP is favourable adsorbent for the adsorption of Cr(VI) ions.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

In this study, the performance of a cross-linked chitosan coated banana peel (CBP), which has been cross-linked with glutaraldehyde, has been investigated for the adsorption of Cr(VI) ions from aqueous solutions. The influence of different experimental parameters; different concentration of Cr(VI) ions, pH, adsorbent amount and contact time was evaluated. The concentration of Cr(VI) in residual solution was identified by a UV-Vis spectrophotometer using a diphenylcarbazide reagent. pH 2.0 was found to be an optimum pH for Cr(VI) adsorption onto CBP beads. The maximum removal efficiencies were obtained 90.2 % for Cr(VI) by using CBP, at a pH 2, contact time of 1h. Various active functional groups were identified by FTIR analysis. The adsorption experimental equilibrium data was found to best fit to the Langmuir mode. Maximum adsorption capacity of CBP was determined to be 102 mg/g. Results showed that CBP is favourable adsorbent for the adsorption of Cr(VI) ions.

Özet

Bu çalışmada glutaraldehitle çapraz bağlanmış kitosan kaplamalı muz kabuğu (KMK) performansı, sulu çözeltilerden Cr (VI) iyonlarının adsorpsiyonu ile araştırılmıştır. Farklı deneysel parametrelerin; Cr (VI) iyonlarının farklı konsantrasyonu, pH, adsorban miktarı ve temas süresinin etkileri değerlendirilmiştir. Çözeltide kalan Cr (VI) konsantrasyonu difenilkarbazit ajanı kullanılarak UV-Vis. spektrofotometresi ile belirlenmiştir. KMK boncuklarıyla Cr(VI) adsorpsiyonunda optimum pH değeri 2.0 olarak bulunmuştur. KMK kullanılarak Cr(VI) maksimum giderimleri, pH 2, temas süresi 1 saatte, % 90,2 olarak elde edilmiştir. Çeşitli fonksiyonel gruplar FTIR analiziyle tanımlanmıştır. Adsorpsiyon deneyi denge verilerinin Langmuir modeline daha uygun olduğu belirlenmiştir. KMK için Cr(VI) maksimum adsorpsiyon kapasitesi 102 mg/g olarak bulunmuştur. Sonuçlar, Cr(VI) iyonlarının adsorpsiyonu için KMK’nın uygun adsorban olduğunu göstermiştir.

🔖

Cite This Article

PARLAYICI, Ş. (2018). Chromium(VI) Removal From Aqueous Solutions by Chitosan Coated Banan Peel Beads. ACADEMIC PLATFORM-JOURNAL OF ENGINEERING AND SCIENCE, Cilt: 6 - Sayı: 1, 40–48. https://ajindex.com/articles/141603

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (11)

  1. H.N.M.E. Mahmud, A.K. ObidulHuq, R.B. Yahya, “The removal of heavy metal ions from wastewater/aqueous solution using polypyrrole-based adsorbents: a review”, RSC Adv. vol. 6 pp. 14778–14791, 2016.
  2. P.T. Yeung, P.Y. Chung, H.C. Tsang, J.O. Tang, G.Y.M. Cheng, R. Gambari, C.H. Chui, K.H. Lam, “Preparation and characterization of bio-safe activated charcoal derived from coffee waste residue and its application for removal of lead and copper ions”, RSC Adv. vol. 4 pp. 38839–38847, 2014.
  3. Şerife Parlayıcı, Erol Pehlivan, “Removal ofmetals by Fe3O4 loaded activated carbon prepared fromplum stone (Prunus nigra): Kinetics and modelling study”, Powder Technology vol. 317 pp. 23–30, 2017.
  4. H. Tao, Y. Chao, R. Xue-hui, W. Ji-de, N. Chun-ge, and S. Xin-tai,. “Facile additive-free synthesis of iron oxide nanoparticles for efficient adsorptive removal of Congo red and Cr(VI)”, Applied Surface Science, vol. 292, pp. 174−180, 2014.
  5. Y. Benito, M. L. Ruiz, “Reverse osmosis applied to metal finishing wastewater”, Desalination, vol. 142, pp. 229–234, 2002.
  6. Ş. Parlayici, V. Eskizeybek, A. Avcı, E. Pehlivan, “Removal of chromium (VI) using activated carbon-supported-functionalized carbon nanotubes”, J Nanostruct Chem, vol. 5, pp. 255–263, 2015
  7. T. Altun, S. Parlayıcı, E. Pehlivan, “Hexavalent chromium removal using agricultural waste rye husk”, Desalination and Water Treatment, vol. 57, pp. 17748–17756, 2016.
  8. T.A. Saleh, A. Sarı, M. Tuzen, Chitosan-modified vermiculite for As (III) adsorption from aqueous solution: equilibrium, thermodynamic and kinetic studies, J. Mol. Liq. vol. 219 pp. 937–945, 2016. T.A. Saleh, “The influence of treatment temperature on the acidity of MWCNT oxidized by HNO3 or a mixture of HNO3/H2SO4”, Appl. Surf. Sci. vol. 257 (17) pp. 7746–7751, 2011
  9. T.A. Saleh, A.A. Al-Saadi, “Surface characterization and sorption efficacy of tireobtained carbon: experimental and semiempirical study of rhodamine B adsorption”, Surf. Interface Anal. vol. 47 (7) pp. 785–792, 2015. M. Aoyama, “Removal of Cr(VI) from aqueous solution by London plane leaves”, J. Chem. Technol. Biotechol. vol. 78 pp. 601–604, 2003.
  10. M. Dakiky, M. Khamis, A. Manassra, M. Mer’eb, “Selective adsorption of chromium(VI) in industrial wastewater using low-cost abundantly available adsorbents”, Adv. Environ. Res. vol. 6 pp. 533–540, 2002.
  11. M. Nameni, M.R. Alavi Moghadam, M. Arami, “Adsorption of hexavalent chromium from aqueous solutions by wheat bran”, Int. J. Environ. Sci. Technol. vol. 5 pp. 161–168, 200