SavedAdd your journal

Journals / International Journal of Automotive Science and Technology / 2026 / Volume: 10 Issue: 1

Influence of MEKP Content and Milling Parameters on the Surface Roughness of Polyester-Based Materials Used in Automotive Applications

İshak Bakdemir(SAKARYA UNIVERSITY OF APPLIED SCIENCES, FACULTY OF TECHNOLOGY)0009-0004-3671-2592
Emrah Arda(SAKARYA UYGULAMALI BİLİMLER ÜNİVERSİTESİ, ARİFİYE MESLEK YÜKSEKOKULU)0000-0002-5496-3764
Ömer Seçgin(SAKARYA UNIVERSITY OF APPLIED SCIENCES, FACULTY OF TECHNOLOGY)0000-0001-6158-3164
Pages
—
Publication Date
2026-03-27
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Overall, it was determined that samples containing 1% MEKP exhibited lower or similar Ra values compared to samples containing 2% MEKP.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In industrial fields such as automotive and machinery manufacturing, the surface quality of polymer-based materials after machining is of great importance for functional performance, assembly accuracy, and service life.
📊
Key Findings & Data:In the experiments, two different polyester samples prepared with 1% and 2% MEKP addition by weight were machined on a CNC milling machine at different speeds, feed rates, and depths of cut.
💡
Conclusion & Impact:Overall, it was determined that samples containing 1% MEKP exhibited lower or similar Ra values compared to samples containing 2% MEKP.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Machining · Methyl ethyl ketone peroxide (MEKP) · Milling

Abstract

In industrial fields such as automotive and machinery manufacturing, the surface quality of polymer-based materials after machining is of great importance for functional performance, assembly accuracy, and service life. In this study, the surface roughness behavior of polyester-based samples containing different proportions of MEKP hardener after milling was experimentally investigated. In the experiments, two different polyester samples prepared with 1% and 2% MEKP addition by weight were machined on a CNC milling machine at different speeds, feed rates, and depths of cut. The surface quality after milling was evaluated using the mean surface roughness (Ra) parameter. The results obtained showed that the MEKP ratio and cutting parameters have a significant effect on surface roughness. Overall, it was determined that samples containing 1% MEKP exhibited lower or similar Ra values compared to samples containing 2% MEKP. This was attributed to the fact that increasing the MEKP ratio increases cross-linking density, making the material more brittle and negatively affecting machinability. Increasing the spindle speed had a surface roughness-reducing effect under all cutting conditions, and smoother surfaces were obtained, especially at medium and high-speed levels, thanks to more stable cutting conditions. In contrast, increasing the feed rate and depth of cut significantly increased the surface roughness. Increased cutting forces at high feed rates and large depths of cut led to increased surface tearing and micro-fractures, especially in the harder and more brittle samples containing 2% MEKP. However, it was observed that these negative effects were partially suppressed at high spindle speeds. Overall, the study results show that polyester-based materials with a low MEKP ratio offer better machinability and lower surface roughness in milling operations. Furthermore, it was concluded that the surface quality of polyester-based parts used in industrial applications such as automotive and machine manufacturing can be improved by selecting appropriate cutting parameters.

🔖

Cite This Article

Bakdemir, İ., Arda, E., Seçgin, Ö. (2026). Influence of MEKP Content and Milling Parameters on the Surface Roughness of Polyester-Based Materials Used in Automotive Applications. International Journal of Automotive Science and Technology, Volume: 10 Issue: 1. https://doi.org/10.30939/ijastech..1872885

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (28)

  1. Akin Y, Han K, Çerlek Ö. Havacılık Uygulamalarında Karbon Temelli Kompozit Malzemeler. Makine Teknol. ve Taşıt Enerj. Sektörleri İçin Malzeme ve Tasarım Metod. I, BİDGE Yayınları; 2023, s. 88–108.
  2. Shah V, Bhaliya J, Patel GM, Deshmukh K. Advances in polymeric nanocomposites for automotive applications: A review. Polym Adv Technol 2022;33:3023–48. https://doi.org/10.1002/pat.5771.
  3. Bukvić M, Milojević S, Gajević S, Đorđević M, Stojanović B. Production Technologies and Application of Polymer Composites in Engineering: A Review. Polymers (Basel) 2025;17:2187. https://doi.org/10.3390/polym17162187.
  4. Begum SA, Rane AV, Kanny K. Applications of compatibilized polymer blends in automobile industry. Compat. Polym. Blends, Elsevier; 2020, s. 563–93. https://doi.org/10.1016/B978-0-12-816006-0.00020-7.
  5. Taha Z, Adamne Major A. Performance and Recyclability of PET and PLA Nanocomposites for Automotive Engineering. Int J Automot Sci Technol 2025;9:90–5. https://doi.org/10.30939/ijastech.1761475.
  6. Erenkov OY, Yavorskii DO. The effect of preliminary surface deformation on the quality of the surface of thermosetting polymer materials treated by cutting. Plast massy 2025:46–8. https://doi.org/10.35164/0554-2901-2025-03-46-48.
  7. Seçgin Ö. Multi-objective Optimization of Ms58 Brass Machining Operation by Multi-axis CNC Lathe. Arab J Sci Eng 2021;46:2133–45. https://doi.org/10.1007/s13369-020-04984-8.
  8. Küçükrendeci İ, Akgül AT, Öztürk M, Bayrak G. Characterization of Polyamide (PA-6) Processed at Different Parameters on the Sliding Automatic Machine. Int J Automot Sci Technol 2025;9:568–75. https://doi.org/10.30939/ijastech.1776999.
  9. Pimpan V, Ruangput K, Saenkhot S. Effect of Initiator and Accelerator Amounts on Mechanical Properties of Unsaturated Polyester Resin. Mater Sci Forum 2022;1064:47–52. https://doi.org/10.4028/p-r8ddt9.
  10. Ciecieląg K. Research on the main and side surfaces after face milling of polymer composites. Adv Sci Technol Res J 2025;19:17–29. https://doi.org/10.12913/22998624/208651.
  11. Ciecieląg K, Kawalec A, Gdula M, Żurek P. Modeling and Cutting Mechanics in the Milling of Polymer Matrix Composites. Materials (Basel) 2025;18:3017. https://doi.org/10.3390/ma18133017.
  12. Mata F, Petropoulos G, Ntziantzias I, Davim JP. A surface roughness analysis in turning of polyamide PA-6 using statistical techniques. Int J Mater Prod Technol 2010;37:173. https://doi.org/10.1504/IJMPT.2010.029467.
  13. Kumar J, Abhishek K, Xu J, Verma RK. Experimental Investigation on Machine-Induced Damages during the Milling Test of Graphene/Carbon Incorporated Thermoset Polymer Nanocomposites. J Compos Sci 2022;6:77. https://doi.org/10.3390/jcs6030077.
  14. Tsao CC, Hocheng H. Evaluation of thrust force and surface roughness in drilling composite material using Taguchi analysis and neural network. J Mater Process Technol 2008;203:342–8. https://doi.org/10.1016/j.jmatprotec.2006.04.126.
  15. Geier N, Davim JP, Szalay T. Advanced cutting tools and technologies for drilling carbon fibre reinforced polymer (CFRP) composites: A review. Compos Part A Appl Sci Manuf 2019;125:105552.https://doi.org/10.1016/j.compositesa.2019.105552.
  16. Tiwari S. Advances in Mechanical Joining Techniques for Metal–Composite Hybrid Structures. J Comput Mech Manag 2025;4:30–9. https://doi.org/10.57159/jcmm.4.2.25194.
  17. Zhu J, Wang X, Chen M. Low-Density Unsaturated Polyester Resin with the Presence of Dual-Initiator. Materials (Basel) 2023;16:4677. https://doi.org/10.3390/ma16134677.
  18. Rahman M, Abdullah Al Mamun M, Sarker P, Islam T, Ahmad Khan M. Effect Of Initiator Concentration On The Mechanical And Degradation Properties Of Bamboo Fabric Reinforced Polyester Resin Composites. Glob J Mater Sci Eng 2020:10–4. https://doi.org/10.37516/global.j.mater.sci.eng.2020.0126.
  19. Zhang J, Wang X, Fu X. High Mechanic Enhancement of Chopped Carbon Fiber Reinforced-Low-Density Unsaturated Polyester Resin Composite at Low Preparation Temperature with Facile Polymerization. Materials (Basel) 2021;14:4273. https://doi.org/10.3390/ma14154273.
  20. Fuchs J, Kozlovets Y, Alms J, Meurer M, Hopmann C, Bergs T, vd. Machinability of Vitrified Semi-Finished Products: Chip Formation and Heat Development at the Cutting Edge. Polymers (Basel) 2025;17:2681. https://doi.org/10.3390/polym17192681.
  21. Alao A-R. Review of ductile machining and ductile-brittle transition characterization mechanisms in precision/ultraprecision turning, milling and grinding of brittle materials. Precis Eng 2024;88:279–99. https://doi.org/10.1016/j.precisioneng.2024.02.012.
  22. Xiao K., Zhang L. The role of viscous deformation in the machining of polymers. Int J Mech Sci 2002;44:2317–36. https://doi.org/10.1016/S0020-7403(02)00178-9.
  23. Wan Jusoh WNSE. New approach to minimise surface roughness in Polytetrafluoroethylene (PTFE) through robotic spindle speed control. ESTEEM Acad J 2025;21:106–18. https://doi.org/10.24191/esteem.v21iMarch.4359.g3122.
  24. Xu W, Zhang L. Heat effect on the material removal in the machining of fibre-reinforced polymer composites. Int J Mach Tools Manuf 2019;140:1–11. https://doi.org/10.1016/j.ijmachtools.2019.01.005.
  25. Shahabaz SM, Sharma S, Shetty N, Shetty SD, M.C. G. Influence of Temperature on Mechanical Properties and Machining of Fibre Reinforced Polymer Composites: A Review. Eng Sci 2021. https://doi.org/10.30919/es8d553.
  26. Cui Z, Ni J, He L, Su R, Wu C, Xue F, vd. Assessment of cutting performance and surface quality on turning pure polytetrafluoroethylene. J Mater Res Technol 2022;20:2990–8. https://doi.org/10.1016/j.jmrt.2022.08.075.
  27. Taha Z, Adamne Major A. Performance and Recyclability of PET and PLA Nanocomposites for Automotive Engineering. Int J Automot Sci Technol 2025;9:90–5. https://doi.org/10.30939/ijastech.1761475.
  28. Küçükrendeci İ, Akgül AT, Öztürk M, Bayrak G. Characterization of Polyamide (PA-6) Processed at Different Parameters on the Sliding Automatic Machine. Int J Automot Sci Technol 2025;9:568–75. https://doi.org/10.30939/ijastech.1776999.