Journals / Geosound / 2024 / Sayı: 60

The Change of the Effect of the Fırıng Temperature of Fossıl And Alternatıve Fuels on the Clınker Mıcrostructure in the Cement Industry

Çimento Sanayiinde Fosil ve Alternatif Yakıtların Pişme Sıcaklığı Etkisinin Klinker Mikro yapısındaki Değişimi

Journal
Geosound
Pages
22–37
Publication Date
2024-12-27
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Alternative and fossil fuels were obtained homogeneously and no negative effects were observed in the microstructure since efficient heating was achieved.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:The wastes generated by the development of industry have begun to threaten sustainable environmental life in Türkiye and Europe.
📊
Key Findings & Data:Cement plants are becoming not only cement production facilities, but also waste disposal facilities in order to solve the environmental and economic problems caused by waste.
💡
Conclusion & Impact:Alternative and fossil fuels were obtained homogeneously and no negative effects were observed in the microstructure since efficient heating was achieved.
🔬Design:Araştırma Makalesi
📍Scope:Comprehensive Sample
⚙️Variables:Klinker · Fosil yakıt · Alternatif yakıt

Abstract

The wastes generated by the development of industry have begun to threaten sustainable environmental life in Türkiye and Europe. Cement plants are becoming not only cement production facilities, but also waste disposal facilities in order to solve the environmental and economic problems caused by waste. The aim of this study is to investigate the microstructure changes of clinker produced from alternative fuels such as waste tires (Tire End-of-Life), RDF (Industrial Plastic), sewage sludge, waste oil, which contain high calorific content and environmental threats, and fossil fuels used, depending on the heating temperature changes. Alternative and fossil fuels were obtained homogeneously and no negative effects were observed in the microstructure since efficient heating was achieved.

Özet

Türkiye ve Avrupa’da gelişen sanayileşme ile oluşan atıklar sürdürülebilir çevre yaşamını tehdit etmeye başlamıştır. Çimento fabrikaları, gün geçtikçe atıkların sebep olduğu çevresel ve ekonomik problemleri çözmek için sadece bir çimento üretim tesisi değil, aynı zamanda bir atık bertaraf tesisi niteliği de kazanmaktadırlar. Bu çalışmanın amacı alternatif yakıt olan ÖTL (Ömrünü tamamlamış lastik), RDF (Endüstriyel plastik) gibi çevresel tehdit unsuru içeren yüksek kalorifik ihtiva gösteren malzemeler ve kullanılan fosil yakıtlardan üretilen klinkerin pişme sıcaklığı değişimlerine göre mikro yapı değişimleri incelenmesidir. Homojen olarak elde edilmiş alternatif ve fosil yakıtların pişirilmesi verimli gerçekleştiğinden dolayı mikro yapıda olumsuzluk gözlemlenmemiştir.

🔖

Cite This Article

Yapıcı, N. (2024). The Change of the Effect of the Fırıng Temperature of Fossıl And Alternatıve Fuels on the Clınker Mıcrostructure in the Cement Industry. Geosound, Sayı: 60, 22–37. https://doi.org/10.70054/geosound.1529018

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (5)

  1. Chatterjee, T.K., 1983. Burnability and Clinkerization of Cement Raw Mixes, Advances in Cement Technology Critical Reviews and Case Studies on Manufacturing, Quality Control, Optimization and Use, 69-113. https://doi.org/10.1016/B978-0-08-028670-9.50009-0.
  2. Gülşen, S., 2016. ‘Çimento Öğütme Prosesinin Modellenmesi Gözlemleyici ve Üst Denetleyici Tasarımı’, Doktora Tezi, İstanbul Teknik Üniversitesi, Fen Bilimleri Enstitüsü, İstanbul, 90 s.
  3. İsli A.F., 2024. ‘Fosil ve Alternatif Yakıtların Klinker Mikroyapısına Etkisi’, Doktora Tezi, Ç.Ü., Fen Bilimleri Enstitüsü, Adana, 121 syf.
  4. TS EN 197., 2012. Çimento-Bölüm 2: Uygunluk değerlendirmesi.
  5. TS EN 196-2. 2014. Methods of Testing Cement-Part 2: Chemical Analysis of Cement. Ankara: Turkish Standards Institute.