SavedAdd your journal

Journals / Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji / 2019 / Cilt: 7 Sayı: 4

Production and Characterization of P3HT:PCBM Photoactive Layer Based Inverted Polymer Solar Cells

P3HT:PCBM Fotoaktif Tabanlı Tersine Çevrilmiş Polimer Güneş Hücrelerinin Üretimi ve Karakterizasyonu

İdris Candan(KOCAELİ ÜNİVERSİTESİ)0000-0002-9950-713X
Yunus Özen(GAZİ ÜNİVERSİTESİ)0000-0002-3101-7644
Pages
916–926
Publication Date
2019-12-24
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The effects of transparent metal oxides as electron transport layer on photovoltaic performance of produced inverted polimer solar cells under AM 1.5 solar illumination was examined and the power conversion efficiencies (PCE) of cells wıth SnO 2 , TiO 2 and ZnO layers were measured as 1.62%, 2.78% and 3.32%, respectively.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, inverted polimer solar cells were produced by using transparent metal oxides of SnO 2 , TiO 2 ve ZnO thin films.
📊
Key Findings & Data:The solar cell structures of Glass/FTO/SnO 2 /Polymer/MoO 3 /Ag, Glass/FTO/TiO 2 /Polymer/MoO 3 /Ag and Glass/FTO/ZnO/Polymer/MoO 3 /Ag were produced by using Glass/fluorine doped tin oxide (Glass/FTO) substrates and P3HT:PCBM polymer photoactive layer.
💡
Conclusion & Impact:The effects of transparent metal oxides as electron transport layer on photovoltaic performance of produced inverted polimer solar cells under AM 1.5 solar illumination was examined and the power conversion efficiencies (PCE) of cells wıth SnO 2 , TiO 2 and ZnO layers were measured as 1.62%, 2.78% and 3.32%, respectively.
🔬Design:Araştırma Makalesi
📍Scope:Comprehensive Sample
⚙️Variables:Tersine çevrilmiş güneş hücreleri · Metal oksitler · P3HT:PCBM

Abstract

In this study, inverted polimer solar cells were produced by using transparent metal oxides of SnO 2 , TiO 2 ve ZnO thin films. The solar cell structures of Glass/FTO/SnO 2 /Polymer/MoO 3 /Ag, Glass/FTO/TiO 2 /Polymer/MoO 3 /Ag and Glass/FTO/ZnO/Polymer/MoO 3 /Ag were produced by using Glass/fluorine doped tin oxide (Glass/FTO) substrates and P3HT:PCBM polymer photoactive layer. A sputterring system was used to coat the transparent metal oxides and a spin coating system was used to deposit polymer layer. The surface morphologies of SnO 2 , TiO 2 , ZnO and P3HT:PCBM polymer layers analyzed by Atomic Force Microscope (AFM). Moreover, the drying process of the polymer layer over time after coating was pictured. The effects of transparent metal oxides as electron transport layer on photovoltaic performance of produced inverted polimer solar cells under AM 1.5 solar illumination was examined and the power conversion efficiencies (PCE) of cells wıth SnO 2 , TiO 2 and ZnO layers were measured as 1.62%, 2.78% and 3.32%, respectively.

Özet

Bu çalışmada, SnO 2 , TiO 2 ve ZnO şeffaf metal oksit ince filmler kullanılarak tersine çevrilmiş güneş hücreleri üretildi. Cam/flor katkılı kalay oksit (Glass/FTO) alttaşlar ve P3HT:PCBM polimer foto-aktif katmanı kullanılarak Cam/FTO/SnO 2 /Polimer/MoO 3 /Ag, Cam/FTO/TiO 2 /Polimer/MoO 3 /Ag ve Cam/FTO/ZnO/Polimer/MoO 3 /Ag güneş hücresi yapıları üretildi. Şeffaf metal oksitler püskürtme yöntemi, polimer tabası ise dönel kaplama yöntemi kullanılarak kaplandı. Kaplama sonrası SnO 2 , TiO 2 , ZnO ve P3HT:PCBM polimer katmanlarının yüzey morfolojileri Atomik Kuvvet Mikroskopu (AFM) yardımı ile analiz edildi. Ayrıca, polimer katmanının kaplama sonrasında zamana göre kuruma süreci görüntülendi. Üretilen tersine çevrilmiş güneş hücrelerinde elektron taşıma tabakası olarak görev yapan şeffaf metal oksitlerin güneş hücrelerinin fotovoltaik performansına etkileri AM 1.5 Güneş altına incelendi ve püskürtme yöntemi ile kaplanan SnO 2 , TiO 2 ve ZnO tabakalarına sahip hücrelerin güç dönüşüm verimlilikleri sırayla %1.62, %2.78 ve %3.32 olarak ölçüldü.

🔖

Cite This Article

Candan, İ., Özen, Y. (2019). Production and Characterization of P3HT:PCBM Photoactive Layer Based Inverted Polymer Solar Cells. Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji, Cilt: 7 Sayı: 4, 916–926. https://doi.org/10.29109/gujsc.621144

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (33)

  1. A. Pochettino, Sul comportamento foto-elettrico dell’antracene, Acad. Lincei Rendus. 15 (1906) 355–363.
  2. J. Koenigsberger, K. Schilling, Über Elektrizitätsleitung in festen Elementen und Verbindungen. I. Minima des Widerstandes, Prüfung auf Elektronenleitung, Anwendung der Dissoziationsformeln, Ann. Phys. 337 (1910) 179–230. doi:10.1002/andp.19103370608.
  3. M. Volmer, Die verschiedenen lichtelektrischen Erscheinungen am Anthracen, ihre Beziehungen zueinander, zur Fluoreszenz und Dianthracenbildung, Ann. Phys. 345 (1913) 775–796. doi:10.1002/andp.19133450411.
  4. H. Akamatu, H. Inokuchi, Y. Matsunaga, Electrical Conductivity of the Perylene-Bromine Complex, Nature. 173 (1954) 168–169.
  5. C.K. Chiang, C.R. Fincher, Y.W. Park, A.J. Heeger, H. Shirakawa, E.J. Louis, S.C. Gau, A.G. MacDiarmid, Electrical Conductivity in Doped Polyacetylene., Phys. Rev. Lett. 40 (1978) 1472–1472. doi:10.1103/PhysRevLett.40.1472.
  6. C.W. Tang, Two‐layer organic photovoltaic cell, Appl. Phys. Lett. 48 (1986) 183–185. doi:10.1063/1.96937.
  7. C.W. Tang, S.A. VanSlyke, Organic electroluminescent diodes, Appl. Phys. Lett. 51 (1987) 913–915. doi:10.1063/1.98799.
  8. H. Kallmann, M. Pope, Photovoltaic Effect in Organic Crystals, J. Chem. Phys. 30 (1959) 585–586. doi:10.1063/1.1729992.
  9. G.A. Chamberlain, Organic solar cells: A review, Sol. Cells. 8 (1983) 47–83. doi:10.1016/0379-6787(83)90039-X.
  10. NREL, Best Research - Efficiency Chart https://www.nrel.gov/pv/assets/pdfs/best-research-cell-efficiencies.20190802.pdf Access date: 08.23.2019.
  11. W. Brütting, Physics of organic semiconductors, Wiley-VCH, 2005.
  12. A.M. Bagher, Introduction to Organic Solar Cells, Sustain. Energy. 2 (2014) 85–90.
  13. S. Günes, H. Neugebauer, N.S. Sariciftci, Conjugated polymer-based organic solar cells., Chem. Rev. 107 (2007) 1324–38. doi:10.1021/cr050149z.
  14. A. Haugeneder, M. Neges, C. Kallinger, W. Spirkl, U. Lemmer, J. Feldmann, U. Scherf, E. Harth, A. Gügel, K. Müllen, Exciton diffusion and dissociation in conjugated polymer/fullerene blends and heterostructures, Phys. Rev. B. 59 (1999) 15346–15351. doi:10.1103/PhysRevB.59.15346.
  15. J.J.M. Halls, K. Pichler, R.H. Friend, S.C. Moratti, A.B. Holmes, Exciton diffusion and dissociation in a poly(p-phenylenevinylene)/C60 heterojunction photovoltaic cell, Appl. Phys. Lett. 68 (1996) 3120. doi:10.1063/1.115797.
  16. C.W. Tang, S. a. Vanslyke, C.H. Chen, Electroluminescence of doped organic thin films, J. Appl. Phys. 65 (1989) 3610–3616. doi:10.1063/1.343409.
  17. C. Richter, D. Lincot, C.A. Gueymard, eds., Solar Energy, Springer, New York, 2012. doi:10.1007/978-1-4614-5806-7.
  18. G. Yu, J. Gao, J.C. Hummelen, A.J. Heeger, Polymer photovoltaic cells: enhanced efficiencies via a network of internal donor-acceptor heterojunctions, Science. 270 (1995) 1789–1791. doi:10.1126/science.270.5243.1789.
  19. Z. Lin, J. Wang, eds., Low-cost Nanomaterials, Springer, Verlag-London, 2014.
  20. M. Jørgensen, K. Norrman, F.C. Krebs, Stability/degradation of polymer solar cells, Sol. Energy Mater. Sol. Cells. 92 (2008) 686–714. doi:10.1016/j.solmat.2008.01.005.
  21. T. Shirakawa, T. Umeda, Y. Hashimoto, A. Fujii, K. Yoshino, Effect of ZnO layer on characteristics of conducting polymer/C 60 photovoltaic cell, J. Phys. D. Appl. Phys. 37 (2004) 847–850. doi:10.1088/0022-3727/37/6/007.
  22. Y. Zhou, H. Cheun, W.J. Potscavage, Jr, C. Fuentes-Hernandez, S.-J. Kim, B. Kippelen, Inverted organic solar cells with ITO electrodes modified with an ultrathin Al2O3 buffer layer deposited by atomic layer deposition, J. Mater. Chem. 20 (2010) 6189. doi:10.1039/c0jm00662a.
  23. V.-H. Tran, R. Khan, I.-H. Lee, S.-H. Lee, Low-temperature solution-processed ionic liquid modified SnO2 as an excellent electron transport layer for inverted organic solar cells, Sol. Energy Mater. Sol. Cells. 179 (2018) 260–269. doi:10.1016/j.solmat.2017.12.013.
  24. D. Yang, P. Fu, F. Zhang, N. Wang, J. Zhang, C. Li, High efficiency inverted polymer solar cells with room-temperature titanium oxide/polyethylenimine films as electron transport layers, J. Mater. Chem. A. 2 (2014) 17281–17285. doi:10.1039/C4TA03838J.
  25. H. Cheun, C. Fuentes-Hernandez, J. Shim, Y. Fang, Y. Cai, H. Li, A.K. Sigdel, J. Meyer, J. Maibach, A. Dindar, Y. Zhou, J.J. Berry, J.-L. Bredas, A. Kahn, K.H. Sandhage, B. Kippelen, Oriented Growth of Al2O3:ZnO Nanolaminates for Use as Electron-Selective Electrodes in Inverted Polymer Solar Cells, Adv. Funct. Mater. 22 (2012) 1531–1538. doi:10.1002/adfm.201102968.
  26. H.-M. Lee, Y.-J. Noh, S.-I. Na, K.-B. Chung, H.-K. Kim, PEDOT:PSS-free organic solar cells fabricated on buffer and anode integrated Ta-doped In2O3 films, Sol. Energy Mater. Sol. Cells. 125 (2014) 145–154. doi:10.1016/J.SOLMAT.2014.02.036.
  27. S. Temel, M. Nebi, D. Peker, Sol- Gel Döndürerek Kaplama Tekniği ile Saydam İletken ZnO İnce Filmlerin Üretilmesi ve Karakterizasyonu, GU J Sci, Part C. 5 (2017) 51–59.
  28. I.D. Parker, Carrier tunneling and device characteristics in polymer light‐emitting diodes, J. Appl. Phys. 75 (1994) 1656–1666. doi:10.1063/1.356350.
  29. M.G. Helander, M. Greiner, W.M. Tang, M.G. Helander, M.T. Greiner, Z.B. Wang, Z.H. Lu, Work function of fluorine doped tin oxide, Artic. J. Vac. Sci. Technol. A Vac. Surfaces Film. (2011). doi:10.1116/1.3525641.
  30. M. Al-ibrahim, S. Sensfuss, J. Uziel, Comparison of normal and inverse poly ( 3- hexylthiophene )/ fullerene solar cell architectures, Sol. Energy Mater. Sol. Cells. 85 (2005) 277–283. doi:10.1016/j.solmat.2004.08.001.
  31. D. Fichou, Handbook of Oligo- and Polythiophene, Wiley, New York, 1999.
  32. J. Li, F. Dierschke, J. Wu, A.C. Grimsdale, K. Müllen, Poly(2,7-carbazole) and perylene tetracarboxydiimide: a promising donor/acceptor pair for polymer solar cells, J. Mater. Chem. 16 (2006) 96–100. doi:10.1039/B512373A.
  33. R. Kroon, M. Lenes, J.C. Hummelen, P.W.M. Blom, B. de Boer, Small Bandgap Polymers for Organic Solar Cells (Polymer Material Development in the Last 5 Years), Polym. Rev. 48 (2008) 531–582. doi:10.1080/15583720802231833.