Journals / Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji / 2023 / Cilt: 11 Sayı: 4

Investigation of thermoelectric module of next generation ice machine with TEPAS

Yeni nesil buz makinesinin termoelektrik modülünün TEPASLA araştırılması

Büşra Sayın(GAZİ ÜNİVERSİTESİ)0009-0005-3255-9305
Raşit Ahıska(GAZİ ÜNİVERSİTESİ)0000-0002-8365-2666
Günay Ömer(ANKARA MEDİPOL ÜNİVERSİTESİ)0000-0001-5695-1188
Pages
1271–1282
Publication Date
2023-12-28
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

It has been determined that the experimental results obtained are the same as the theoretical calculation results within the error limits.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Environmental pollution, inadequacy of clean drinking water and energy are the most important problems of our time.
📊
Key Findings & Data:With the increasing population, the need for energy and clean drinking water has also increased.
💡
Conclusion & Impact:It has been determined that the experimental results obtained are the same as the theoretical calculation results within the error limits.
🔬Design:Araştırma Makalesi
📍Scope:2014 Verileri
⚙️Variables:yeni buz makinesi · termoelektrik modül · TEPAS

Abstract

Environmental pollution, inadequacy of clean drinking water and energy are the most important problems of our time. With the increasing population, the need for energy and clean drinking water has also increased. In addition, environmental pollution is increasing with the wastes generated as a result of increasing industrialization. Thermoelectric (TE) technology is one of the technologies that will bring solutions to the fields of heating, cooling and energy production. In addition, the fact that it does not cause environmental pollution brings thermoelectric technologies to the fore. Studies on improving the parameters of ice machines that make up the thermoelectric cooling industry are increasing day by day. For this type of research, it is necessary to examine the characteristics of ice machines. In this study, TES Thermoelectric Ltd. for the first time in the world. Research has been carried out to improve the parameters of the Turkish patented (Patent No: 2014-14588) thermoelectric ice machine produced in the company. For this, all parameters of the thermoelectric ice machine (TEIM), which is electricity and water efficient, environmentally friendly and with heat pipe, were examined experimentally. This invention, whose patent has received a gold medal in the world, not only solved the environmental, energy and water problems, but also brought a new concept area and solution proposal for the ice consumption and production of human beings. It has been determined that the experimental results obtained are the same as the theoretical calculation results within the error limits.

Özet

Çevre kirliliği, temiz içme suyunun ve enerjinin yetersizliği günümüzün en önemli sorunlardır. Artan nüfus ile beraber enerji ve temiz içme suyu ihtiyacı da artmıştır. Bunun yanında artan endüstrileşme sonucu meydana gelen atıklarla çevre kirliliği de artmaktadır. Isıtma, soğutma ve enerji üretme alanlarına çözüm getirecek teknolojilerden biri termoelektrik (TE) teknolojisidir. Ayrıca çevre kirliliğine yol açmaması termoelektrik teknolojileri öne çıkarmaktadır. Termoelektrik soğutma sanayisini oluşturan buz makinelerinin parametrelerinin iyileştirilmesi konusundaki çalışmalar her geçen gün artmaktadır. Bu tip araştırmalar için buz makinelerinin özelliklerinin incelenmesi gerekmektedir. Bu çalışmada dünyada ilk kez TES Termoelektrik Ltd. Şirketinde üretilen Türk patentli (Patent No:2014-14588) termoelektrik buz makinesinin parametrelerini iyileştirmek amacıyla araştırmalar yapılmıştır. Bunun için elektrik ve su tasarruflu, çevre dostu ve ısı borulu termoelektrik buz makinesinin (TEBM) deneysel olarak bütün parametreleri incelenmiştir. Dünyada patenti altın madalya almış olan bu buluş, sadece çevre, enerji ve su sorunlarını çözmemiş aynı zamanda insanoğlunun buz tüketimi ve üretimi konusunda yeni bir kavram alanı ve çözüm önerisi getirmiştir. Elde edilen deneysel sonuçların hata sınırları içinde teorik hesaplama sonuçlarıyla aynı olduğu tespit edilmiştir.

🔖

Cite This Article

Sayın, B., Ahıska, R., Ömer, G. (2023). Investigation of thermoelectric module of next generation ice machine with TEPAS. Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji, Cilt: 11 Sayı: 4, 1271–1282. https://doi.org/10.29109/gujsc.1379208

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (16)

  1. Günay Ömer (2023). Earth Air Thermoelectric Generators, GU J Sci, Part C, 11(3), 804-812.
  2. A. Rodríguez, J.G. Vián, D. Astrain, (2009). Development and experimental validation of a computational model in order to simulate ice cube production in a thermoelectric ice-maker. Applied Thermal Engineering 29, 2961–2969.
  3. Ye Liu, Xueli Wang, Xiao Liu, Jianlin Yu, Hongkui Ma, (2022). Experimental research on a semiconductor freezer utilizing two-stage thermoelectric modules. Energy Conversion and Management 274, 1-10.
  4. Yan-Wei Gao, Shi Cong-Linga, Wang Xiao-Dong, (2019). Numerical analysis for transient supercooling effect of pulse current shapes on a two-stage thermoelectric cooler. Applied Thermal Engineering ng 163, 1-10.
  5. R. Ahıska, (2014).Patent No: TR 2014-14588.
  6. S. Dislitas, (2009). Bilgisayar Kontrollü Termoelektrik Performans Analiz Sistemi, Doktora Tezi, Ankara. [7] Yavuz H., Omer G. (2022). Heat Pipe Thermoelectric Ice Machine Design: For Water and Energy Saving, Emerging Materials Research 35 (4), 3-15.
  7. Ahıska, R., Ahıska, K., (2010). New method for investigation of parameters of real thermoelectric modules, Energy Conversion and Management, 51, 338-345.
  8. R. Ahıska, G. Ahıska, K. Ahıska, (2009). Analysis of a new method for measurement of parameters of real thermoelectric module employed in medical cooler for renal hypothermia, Instrumentation Science & Technology, 37 (1), 102-123.
  9. Ahıska, R., (2009). Comparing analysis of a new method for measurement of parameters of real thermoelectric modules, XIII International Forum on Thermoelectricity, Ukraine, 28-36.
  10. R. Аhıska, (2005). The study of thermoemf effect on exit parameters of thermoelectric modules, International Conference Fizika, Azerbaijan, 144-148.
  11. Ahıska, R., (2008). New method for studying parameters of a thermopile, Journal of Thermoelectricity, 3, 71-82.
  12. Аhıska, R., (2007). New method for investigation of dynamic parameters of thermoelectric modules, Turk J Elec Engin, 15 (1), 51-65.
  13. Аhıska, R., (2007). New method for study dynamic exit properties of thermoelectric modules, J. Fac. Eng. Arch. Gazi Univ., 22 (4), 709-716.
  14. Ahıska, R., and et. (2004). Standart termoelektrik modülün Z parametresinin ölçülmesi için yeni yöntem ve yeni sistem, Gazi Üniversitesi Mühendislik Fakültesi Dergisi, 19 (4), 467-473.
  15. Ahiska R, Dislitas S, Omer G, (2012). A new method and computer-controlled system for measuring the time constant of real thermoelectric modules. Energy Conversion and Management, 53, 314–321.
  16. TES Ltd, (2023). Web: testhermoelectric.com,, Ankara.