SavedAdd your journal

Journals / Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji / 2024 / Cilt: 12 Sayı: 4

Investigation and Optimization of NPT Taper Threading Operations on St37-2 / S235JR, 11SMnPb37 and C45 (1.0503) Steels on CNC Lathes

CNC Torna Tezgâhlarında St37-2 / S235JR, 11SMnPb37 ve C45 (1.0503) Çeliklerine NPT Konik Diş Açma İşlemlerinin İncelenmesi Ve Optimizasyonu

Cüneyt Kurtuluş(GAZİ ÜNİVERSİTESİ, FEN BİLİMLERİ ENSTİTÜSÜ)0000-0001-6769-2070
Emre Ayhan(GAZİ ÜNİVERSİTESİ, TEKNİK BİLİMLER MESLEK YÜKSEKOKULU)0000-0002-3923-0992
Ahmet Mavi(GAZI UNIVERSITY, FACULTY OF TECHNOLOGY)0000-0003-0339-2639
Pages
1069–1078
Publication Date
2024-12-31
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

According to the ANOVA results, it was found that the material hardness had the greatest effect on Fc and α values.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, NPT taper threading was performed on materials with different hardness (St37-2/S235JR, 11SMnPb37 and C45(1.0503)) and the effects of machining parameters on the main cutting force (Fc) and rake (α) were experimentally investigated.
📊
Key Findings & Data:Four different cutting speeds (50, 60, 70 and 80 m/min), 1.411 mm/rev pitch and two different coated cutting tools (ALCrN+ ALCrSIN, TİALN) coated by PVD method were used in the experiments.
💡
Conclusion & Impact:According to the ANOVA results, it was found that the material hardness had the greatest effect on Fc and α values.
🔬Design:Araştırma Makalesi
📍Scope:Comprehensive Sample
⚙️Variables:NPT konik diş · ANOVA · RSM

Abstract

In this study, NPT taper threading was performed on materials with different hardness (St37-2/S235JR, 11SMnPb37 and C45(1.0503)) and the effects of machining parameters on the main cutting force (Fc) and rake (α) were experimentally investigated. Four different cutting speeds (50, 60, 70 and 80 m/min), 1.411 mm/rev pitch and two different coated cutting tools (ALCrN+ ALCrSIN, TİALN) coated by PVD method were used in the experiments. The depth of cut was taken as constant 1.015 mm in all experiments. Analysis of variance (ANOVA) was performed to determine the effective parameters on the experimental results and the optimum machining parameters were determined by response surface methodology (RSM). According to the ANOVA results, it was found that the material hardness had the greatest effect on Fc and α values. It was concluded that the optimum values will be obtained when 11SMnPb37 material is machined at a cutting speed of 63.6364 m/min using TİALN PVD coated tool.

Özet

Bu çalışmada, farklı sertliğe sahip malzemeler (St37-2/S235JR, 11SMnPb37 ve C45(1.0503)) üzerine NPT konik diş açma işlemi uygulanmış ve işleme parametrelerinin esas kesme kuvveti (Fc) ve eğim (α) üzerine etkileri deneysel olarak araştırılmıştır. Deneylerde dört farklı kesme hızı (50, 60, 70 ve 80 m/dak), 1,411 mm/dev adım ve PVD yöntemi ile kaplanmış iki farklı kaplamalı kesici takım (ALCrN+ ALCrSİN, TİALN) kullanılmıştır. Kesme derinliği ise tüm deneylerde sabit 1,015 mm alınmıştır. Deney sonuçları üzerinde etkin parametrelerin belirlenmesi için varyans analizi (ANOVA) yapılarak, yanıt yüzeyi metodolojisi (RSM) yöntemiyle optimum işleme parametreleri tespit edilmiştir. ANOVA sonuçlarına göre Fc ve α değerleri üzerinde en büyük etkiye malzeme sertliğinin sahip olduğu tespit edilmiştir. Optimum değerlerin 11SMnPb37 malzemenin TİALN PVD kaplamalı takım kullanılarak 63,6364 m/dak kesme hızında işlendiğinde elde edileceği sonucuna ulaşılmıştır.

🔖

Cite This Article

Kurtuluş, C., Ayhan, E., Mavi, A. (2024). Investigation and Optimization of NPT Taper Threading Operations on St37-2 / S235JR, 11SMnPb37 and C45 (1.0503) Steels on CNC Lathes. Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji, Cilt: 12 Sayı: 4, 1069–1078. https://doi.org/10.29109/gujsc.1592300

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (23)

  1. Show, M. C. (2005). Metal Cutting Principles. New York: Oxford University Press. Tutunea, D. F., & Marginean, G. (2013). CNC Machining Technology. Volume III: Procedures. Sibiu: "Lucian Blaga" University.
  2. Jin, X., & Zhang, D. (2009). Multi-objective optimization of turning process in view of machining efficiency and carbon emission. Journal of Cleaner Production, 17(16), 1478-1487.
  3. Lin, S. C., & Chen, I. K. (2012). The CNC system with thread cutting function. The International Journal of Advanced Manufacturing Technology, 62(5-8), 771-778.
  4. Nasr, M. N. A., & Kamrani, A. K. (2006). A new methodology for extracting manufacturing features from CAD system. Computers & Industrial Engineering, 51(3), 389-415.
  5. Brecher, C., Esser, M., & Witt, S. (2015). Interaction of manufacturing process and machine tool. CIRP Annals, 64(2), 588-609. Bolt, P. (2015). CNC Control Setup for Milling and Turning. New York: Industrial Press.
  6. Das, A., Patel, S. K., Hotta, T. K., & Biswal, B. B. (2019). Statistical analysis of different machining characteristics of EN-24 alloy steel during dry hard turning with multilayer coated cermet inserts. Measurement, 134, 123–141.
  7. Duzen, H., & Acar, E. (2016). Effects of cutting parameters on vibration and sound pressure level in turning of AISI 304 austenitic stainless steels. The International Journal of Advanced Manufacturing Technology, 82(5-8), 1185-1196.
  8. Tsai, M. Y., & Wang, P. J. (2007). Optimization of multi-pass turning with genetic algorithm and Taguchi's technique. Journal of Materials Processing Technology, 209(2), 661-667.
  9. Li, H., Liu, Y., & Zhang, D. (2008). Tool life and surface roughness in machining 20CrMnTi alloy with coated carbide tool under different cooling/lubrication conditions. International Journal of Refractory Metal sand Hard Materials, 26(3), 189-198.
  10. Jin, X., & Zhang, Y. (2009). Research on cutting parameters for finish turning based on the taguchi method. Journal of Materials Processing Technology, 209(8), 3809-3814.
  11. Liao, Y. S., & Chen, Y. C. (2010). A study on the high-speed finish turning of AISI 4340 hardened alloy steel by Al2O3/TiC mixed ceramic tool. Journal of Materials Processing Technology, 210(15), 2245-2251.
  12. Mohsen Soori, Mohammed Asmael. (2022). A Review of the Recent Development in Machining Parameter Optimization. Jordan Journal of Mechanical and Industrial Engineering, 16 (2), 205-223.
  13. Makadia, A.J.; Nanavati, J. (2013). Optimization of machining parameters for turning operations based on response surface methodology. Measurement, 46(4), 1521-1529.
  14. Neşeli, S.; Yaldız, S.; Türkeş, E. (2011). Optimization of tool geometry parameters for turning operations based on the response surface methodology. Measurement, 44(3), 580-587.
  15. Gupta, M.K.; Sood, P.; Sharma, V.S. (2016). Optimization of machining parameters and cutting fluids during nano-fluid based minimum quantity lubrication turning of titanium alloy by using evolutionary techniques. Journal of Cleaner Production, 135, 1276-1288.
  16. Temak (2022). Kraft 2022 Ürün Kataloğu. https://temak.com.tr/wp-content/uploads/2022/11/Kraft-2022-U%CC%88ru%CC%88n-Katalog%CC%86u.pdf
  17. Singal R.K., Singal M., Singal R. (2009). "Fundamentals of Machining and Machine Tools", Wiley.
  18. Çakır M.C., “Modern Talaşlı İmalatın Esasları”, Uludağ Üniversitesi Güçlendirme Vakfı, Yayın No: 140 VİPAŞ Yayın No: 16 Bursa (1999).
  19. Raymond HM, Douglas CM, Christine MAC (2009). Response Surface Methodology (3rd Edition). Canada: A John Wiley & Sons, Inc., Publication, 1-11.
  20. Kathleen MC, Natalia YK, Jeff R (2004). Response Surface Methodology. CASOS Technical Report, 31.
  21. Ayhan, E., Yurdakul, M., Çoğun, C., & İç, Y. T. (2023). The entropy method integrated RSM model to evaluate hole geometries in electrochemical blind hole drilling. Australian Journal of Mechanical Engineering, 1–19.
  22. Amel Chabbi, Mohamed Athmane Yallese, Ikhlas Meddour, Mourad Nouioua, Tarek Mabrouki, François Girardin (2017). Predictive modeling and multi-response optimization of technological parameters in turning of Polyoxymethylene polymer (POM C) using RSM and desirability function. Measurement, 95, 99-115.
  23. Singal R.K., Singal M., Singal R. (2009). "Fundamentals of Machining and Machine Tools", Wiley.