Journals / EMO Bilimsel Dergi / 2026 / Cilt: 16 Sayı: 3

Extracting Sparse Periodic Fault Signatures From Noisy Signals

Gürültülü Sinyallerden Seyrek Ve Periyodik Arıza Verilerinin Çıkarılması

Aziz Kubilay Ovacıklı(İSTANBUL AREL ÜNİVERSİTESİ)0000-0001-6687-7794
Pages
25–35
Publication Date
2026-09-30
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The results demonstrate that gradient-based optimization successfully recovers defect-related periodic impulses by suppressing undesired components.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:This study investigates the recovery of sparse, periodic fault signatures from noisy observations in rolling-element bearings.
📊
Key Findings & Data:We compare the optimization of higher-order statistics (skewness and kurtosis) with L_1-norm minimization to enhance the impulsiveness and sparseness of the target signals.
💡
Conclusion & Impact:The results demonstrate that gradient-based optimization successfully recovers defect-related periodic impulses by suppressing undesired components.
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:Seyrek sinyal geri kazanımı · Gradyan arama optimizasyonu · Arıza teşhisi

Abstract

This study investigates the recovery of sparse, periodic fault signatures from noisy observations in rolling-element bearings. We compare the optimization of higher-order statistics (skewness and kurtosis) with L_1-norm minimization to enhance the impulsiveness and sparseness of the target signals. By modeling the signal of interest as a sum of harmonically related sinusoids, these objective functions are evaluated in the presence and absence of additive noise and linear distortion. The results demonstrate that gradient-based optimization successfully recovers defect-related periodic impulses by suppressing undesired components. Furthermore, numerical experiments confirm that L_1-norm minimization provides superior performance and faster convergence in promoting sparsity compared to skewness- and kurtosis-maximizing methods.

Özet

Bu çalışmada, rulmanlarda meydana gelen arızalara ait seyrek ve periyodik sinyal bileşenlerinin gürültülü gözlem verilerinden geri kazanımı incelenmektedir. Hedef sinyallerin darbeselliğini ve seyrekliğini artırmak amacıyla, yüksek mertebeden istatistiklerin (çarpıklık ve basıklık) optimizasyonu ile L_1-normu minimizasyonu yöntemleri karşılaştırılmıştır. İlgilenilen sinyal, harmonik olarak ilişkili sinüs dalgalarının toplamı şeklinde modellenmiş; bu optimizasyon fonksiyonlarının performansları, beyaz gürültü ve lineer bozulmanın bulunduğu ve bulunmadığı durumlarda değerlendirilmiştir. Elde edilen bulgular, gradyan tabanlı optimizasyonun istenmeyen bileşenleri bastırarak arıza kaynaklı periyodik darbeleri başarıyla geri kazandığını göstermektedir. Ayrıca sayısal deneyler, L_1-normu minimizasyonunun, çarpıklık ve basıklık maksimizasyonuna kıyasla, seyrekliği artırmada daha üstün bir performans ve daha hızlı yakınsama sergilediğini doğrulamaktadır.

🔖

Cite This Article

Ovacıklı, A. K. (2026). Extracting Sparse Periodic Fault Signatures From Noisy Signals. EMO Bilimsel Dergi, Cilt: 16 Sayı: 3, 25–35. https://ajindex.com/articles/1390241

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (55)

  1. K. Wang, H. Jiang, B. Hai and R. Yao, “Rolling bearing fault feature detection using nonconvex wavelet total variation”, Measurement, vol. 179, pp. 109471, 2021.
  2. S. Abrar, A. Zerguine and K. A. Meraim, “Adaptive blind equalization in impulsive noise”, 2020 54th Asilomar Conference on Signals, Systems, and Computers, pp. 1415-1419, 2020.
  3. Z. Yu and B. Zhang, “The art of noise modeling and mitigation on power line communication in distributed energy system”, IEEE Transactions on Instrumentation and Measuremen, vol. 74, pp. 1-23, 2025.
  4. M. Zhan, Z. Pang, D. Dzung, K. Yu and M. Xiao, “Short-packet interleaver against impulse interference in practical industrial environments”, IEEE Transactions on Wireless Communications, vol. 21, no. 12, pp. 10257-10270, 2022.
  5. L. He, J. He, Q. Zhou, C. Yi and D. Wang, “Non-iterative optimal blind deconvolution and its application to machine condition monitoring”, Mechanical Systems and Signal Processing, vol. 243, pp. 113715, 2026.
  6. A. K. Ovacıklı, P. Pääjärvi, J. P. LeBlanc, and J. E. Carlson, “Recovering periodic impulsive signals through skewness maximization,” IEEE Transactions on Signal Processing, vol. 64, no. 6, pp. 1586–1596, March 2016.
  7. S. Li, Y. Han, J. Gaber, S. Yang and Q. Yang, “A multi-antenna spectrum sensing method based on CEEMDAN decomposition combined with wavelet packet analysis”, Electronics, vol. 12, no. 18, pp. 3823, 2023.
  8. A. Gabrielli, M. Battarra, E. Mucchi and G. Dalpiaz, “A procedure for the assessment of unknown parameters in modeling defective bearings through multi-objective optimization”, Mechanical Systems and Signal Processing, vol. 185, pp. 109783, 2023.
  9. A. K. Ovacıklı, J. E. Carlson, and P. Pääjärvi, “Blind pulse compression through skewness maximization on overlapping echoes from thin layers”, in Ultrasonics Symposium (IUS), 2016 IEEE International. IEEE, 2016, pp. 1–4.
  10. J. E. Carlson, A. K. Ovacıklı, and P. Pääjärvi, “Material impulse response estimation from overlapping ultrasound echoes using a compressed sensing technique”, in Ultrasonics Symposium (IUS), 2017 IEEE International. IEEE, 2017, pp. 1–4.
  11. J. E. Carlson, P. Gupta and N. Kumar, “Estimation of compound layer thickness and porosity in nitrocarburized hardening”, 2024 IEEE Ultrasonics, Ferroelectrics, and Frequency Control Joint Symposium (UFFC-JS), pp. 1-4, 2024.
  12. S. Liang, B.E. Treeby and E. Martin, “Review of the low-temperature acoustic properties of water, aqueous solutions, lipids, and soft biological tissues”, IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, vol. 21, no. 5, pp. 607-620, 2024.
  13. N. Kumar and R. K. Satapathy, “Bearings in aerospace, application, distress, and life: a review”, Journal of Failure Analysis and Prevention, vol. 23, pp. 915–947, 2023.
  14. E. Park, Y. Jung, I. Kim and U. Lee, “Charlie and the semi-automated factory: data-driven operator behavior and performance modeling for human-machine collaborative systems”, Proceedings of the 2023 CHI Conference on Human Factors in Computing Systems, Association for Computing Machinery, pp. 1-16, 2023.
  15. M. Romanssini, P. C. C. de Aguirre, L. C. Severo and A. G. Girardi, “A review on vibration monitoring techniques for predictive maintenance of rotating machinery”, Eng, vol. 4, no. 3, pp. 1797-1817, 2023.
  16. Y. Bai, W. Cheng, W. Wen and Yang Liu, “Application of time-frequency analysis in rotating machinery fault diagnosis”, Shock and Vibration, vol. 2023, no. 1, pp. 9878228, 2023.
  17. R. P. Masini, M. C. Medeiros and E. F. Mendes, “Machine learning advances for time series forecasting”, Journal of Economic Surveys, vol. 37, no. 1, pp. 76-111, 2023.
  18. B. Hou, Y. Wang and D. Wang, “Investigations on multiclass classification model-based optimized weights spectrum for rotating machinery condition monitoring”, Journal of Dynamics, Monitoring and Diagnostics, vol. 4, no. 3, pp. 194-202, 2025.
  19. M. Eppert, S. Mukherjee and D. Ghoshdastidar, “Recovering imbalanced clusters via gradient-based projection pursuit”, vol. 212, pp. 105530, 2026.
  20. S. Li, Y. Gao, J. Wu and L. Cao, “Blind deblurring of astronomical images using a SCGTV-based single-frame method”, vol. 32, no. 20, pp. 35579-35593, 2024.
  21. S. Wu, Y. Li, J. Wang, H. Zhou, C. Tang, Y. Guan, F. Guo and X. Li, “Numerical MCRT simulation and inter-symbol interference analysis of laser multipath transmission in airborne air-to-air channels”, Photonics, vol. 11, no. 3, pp. 280, 2024.
  22. Z. Huang and L. Cao, “Quantitative phase imaging based on holography: trends and new perspectives”, Huang and Cao Light: Science & Applications, vol 13, no. 145, pp 1-43, 2024.
  23. L. F. González, M. F. Bande and W. G. Manteiga, “A critical review of lasso and its derivatives for variable selection under dependence among covariates”, vol. 90, no. 1, pp. 118-145, 2022.
  24. A. M. Nassef, M. A. Abdelkareem, H. M. Maghrabie and A. Baroutaji, “Review of metaheuristic optimization algorithms for power systems problems”, Sustainability, vol. 15, no. 12, pp. 9434, 2023.
  25. R. Heckel, M. Jacob, A. Chaudhari, O. Perlman and E. Shimron, “Deep learning for accelerated and robust MRI reconstruction”, Magnetic Resonance Materials in Physics, Biology and Medicine, vol. 37, pp. 335-368, 2024.
  26. E. J. Cand`es et al., Compressive sampling, in Proceedings of the International Congress of Mathematicians, vol. 3. Madrid, Spain, 2006, pp. 1433–1452.
  27. Y. F. Liu, T. H. Chang, M. Hong, Z. Wu, A. M. C. So and E. A. Jorswieck, “A survey of recent advances in optimization methods for wireless communications”, IEEE Journal on Selected Areas in Communications, vol. 42, no. 11, pp. 2992-3031, 2024.
  28. Y. Zhang, E. Yang, H. H. Yoon, Q. Cheng, Z. Sun, T. Hasan and W. Cai, “Reconstructive spectrometers: hardware miniaturization and computational reconstruction”, eLight, vol. 5, no 23, pp 1-43, 2025.
  29. S. Kalra and N. K. Shukla, “Uncertainty principle for convolutional tight frames and its applications in signal recovery”, Sampling Theory, Signal Processing, and Data Analysis, vol. 23, no. 21, 2025.
  30. Y. Tian and Y. Zhang, “A comprehensive survey on regularization strategies in machine learning”, vol. 80, pp. 146-166, 2022.
  31. A. Dades and R. Daher, “New uncertainty principles for the free metaplectic wavelet transform”, Integral Transforms and Special Functions, vol. 37, no. 2, pp. 83-96, 2026.
  32. R. B. Mhenni, S. Bourguignon and J. Idier, “A greedy sparse approximation algorithm based on L1-norm selection rules”, ICASSP 2020 - 2020 IEEE International Conference on Acoustics, Speech and Signal Processing (ICASSP), pp. 5390-5394, 2020.
  33. K. N. Filho, R. Lopes, R. D. B. Brotto, T. C. Senna and J. M. T. Romano, “Algorithms for sparse multichannel blind deconvolution”, IEEE Transactions on Geoscience and Remote Sensing, vol. 61, pp. 1-7, 2023.
  34. Z. Liu, M. Wang, Y. Zhu, X. Liu, Y. Hu and C. He, “A sparse optimization model of l2-l1-2 for estimating guided waves dispersion curves, Measurement, vol. 253, pp. 117399, 2025.
  35. Y. Zhao and B. Guo, “A hybrid signal decomposition and adaptive deep deconvolution method for rotating machinery fault diagnosis”, Journal of the Brazilian Society of Mechanical Sciences and Engineering, vol. 48, no. 11, 2026.
  36. S. Ereiz, I. Duvnjak and J. F. J. Alonso, “Review of finite element model updating methods for structural applications”, Structures, vol. 41, pp. 684-723, 2022.
  37. A. C. Dumitrașcu, D. Cojocaru, V. Cârlescu, A. Zaharia and D. Olaru, “Influence of the cage on the friction torque in miniature angular contact ball bearings”, Lubricants, vol. 14, no. 4, pp. 1-18, 2026.
  38. R. N. A. Algburi, H. S. S. Aljibori, Z. Al-Huda, Y. H. Gu and M. A. Al-antari, “Advanced fault diagnosis in industrial robots through hierarchical hyper-laplacian priors and singular spectrum analysis”, Complex & Intelligent Systems, vol. 11, no. 282, 2025.
  39. P. P. Yuan, Z. J. Zhao and W. X. Ren, “A combination of improved spline-kernelled chirplet transform and multi-synchrosqueezing technique for analyzing nonstationary signals and structural instantaneous frequency identification”, Mechanical Systems and Signal Processing, vol. 223, pp. 111873, 2025.
  40. J. Yang, W. Bao, Y. Liu and X. Li, “Class metric regularized deep belief network with sparse representation for fault diagnosis”, International Journal of Intelligent Systems, vol. 37, no. 9, pp. 5996-6022, 2022.
  41. K. K. R. Nareddy, A, J, Kamath and C. S. Seelamantula, “Tight-frame-like analysis-sparse recovery using nontight sensing matrices”, SIAM Journal on Imaging Sciences, vol. 17, no. 3, pp. 1587-1618, 2024.
  42. A. K. Ovacıklı, P. Pääjärvi, and J. P. LeBlanc, Skewness as an objective function for vibration analysis of rolling element bearings, in 8th International Symposium on Image and Signal Processing and Analysis (ISPA). IEEE, Sep. 2013, pp. 462–466.
  43. C. Peeters, J. Antoni and J. Helsen, “Blind filters based on envelope spectrum sparsity indicators for bearing and gear vibration-based condition monitoring”, Mechanical Systems and Signal Processing, vol. 138, pp. 106556, 2020.
  44. L. C. Kwek, A. W. C. Tan, H. S. Lim, C. H. Tan and K. A. Alaghbari, “Sparse representation and reproduction of speech signals in complex fourier basis”, International Journal of Speech Technology, vol. 25, pp. 211–217, 2022.
  45. A. K. Ovacıklı, P. Pääjärvi, J. P. LeBlanc, and J. E. Carlson, Uncovering Harmonic Content via Skewness Maximization - A Fourier Analysis, in Signal Processing Conference (EUSIPCO), 2014 Proceedings of the 22nd European. IEEE, 2014, pp. 481–485.
  46. C. Peeters, J. Antoni and J. Helsen, “A multi-delay extension of the discrete/random separation method”, Mechanical Systems and Signal Processing, vol. 236, pp. 112959, 2025.
  47. S. Yoon, H. Yang and W. Seong, “Ray-based blind deconvolution with maximum kurtosis phase correction”, J. Acoust. Soc. Am, vol. 151, pp. 4237-4251, 2022.
  48. K. Chen, C. Ding, B. Wang, J. Wang, W. Huang and Zhongkui Zhu, “Interpretable transfer unrolling network for intelligent cross-domain condition monitoring of rotating machinery”, IEEE Transactions on Instrumentation and Measurement, vol. 74, pp. 1-12, 2025.
  49. C. Pan, G. Zhou, K. Zhi, S. Hong, T. Wu and Y. Pan, “An overview of signal processing techniques for ris/irs-aided wireless systems”, IEEE Journal of Selected Topics in Signal Processing, vol. 16, no. 5, pp. 883-917, 2022.
  50. D. Malyuta, T. P. Reynolds, M. Szmuk, T. Lew, R. Bonalli and M. Pavone, “Convex optimization for trajectory generation: a tutorial on generating dynamically feasible trajectories reliably and efficiently”, IEEE Control Systems Magazine, vol. 42, no. 5, pp. 40-113, 2022.
  51. S. Ravishankar, J. C. Ye and J. A. Fessler, “Image reconstruction: from sparsity to data-adaptive methods and machine learning”, Proceedings of the IEEE, vol. 108, no. 1, pp. 86-109, 2020.
  52. B. Chen, L. Liu, Z. Zou and Z. Shi, “Target detection in hyperspectral remote sensing image: current status and challenges”, Remote Sensing, vol. 15, no. 13, pp. 3223, 2023.
  53. C. Zhang, J. Qin, Q. Ma, Y. Shi and M. Li, “Resilient distributed state estimation for lti systems under time-varying deception attacks”, vol. 10, no. 1, pp. 381-393, 2023.
  54. S. Grebien, E. Leitinger, K. Witrisal and B. H. Fleury, “Super-resolution estimation of uwb channels including the dense component-an sbl-inspired approach”, IEEE Transactions on Wireless Communications, vol. 23, no. 8, pp. 10301-10318, 2024.
  55. J.-J. Fuchs, Detection and estimation of superimposed signals, in Acoustics, Speech and Signal Processing, 1998. Proceedings of the 1998 IEEE International Conference on, vol. 3. IEEE, 1998, pp. 1649–1652.