AI Summary & Key Takeaways
AI InsightBy valorizing waste tires and contributing to water treatment, this study offers a sustainable solution aligned with circular economy principles.
📌 3 Key Takeaways
Abstract
This comprehensive study focused on producing activated carbon from waste tires via pyrolysis and chemical activation and subsequently investigated its potential for removing the cytotoxic cancer drug Sunitinib from aqueous solutions. The physicochemical properties of the synthesized activated carbon, including surface morphology, pore structure, and surface chemistry, were meticulously characterized using SEM, BET, and pHpzc analyses, respectively. The effects of critical operational parameters—adsorbent dose, solution pH, initial concentration, and contact time—on adsorption efficiency were systematically investigated. Optimal conditions were successfully determined as 40 mg/50 mL adsorbent dose, neutral pH, 50 mg/L initial concentration, and 150 min contact time. Kinetic analysis revealed that the adsorption mechanism followed the pseudo-second-order model, with chemisorption being the dominant rate-limiting step. Equilibrium data showed excellent agreement with the Langmuir isotherm model, indicating a calculated maximum adsorption capacity of 65.63 mg/g. Thermodynamic evaluation confirmed that the process was spontaneous (ΔG° <0) and feasible, with an endothermic nature (ΔH° = 52.30 kJ/mol) and increasing randomness (ΔS° = 205.10 J/mol K). Mechanistic investigations have proposed a multi-stage adsorption process: a rapid initial binding governed by chemical affinity, followed by an equilibrium state characterized by physical interactions (van der Waals forces, π–π interactions). Excellent reusability potential was demonstrated, with over 80% efficiency retention after five regeneration cycles. These findings collectively highlight the significant potential of waste tire-derived activated carbon as a cost-effective and highly efficient adsorbent for removing pharmaceutical contaminants from aquatic environments. By valorizing waste tires and contributing to water treatment, this study offers a sustainable solution aligned with circular economy principles.
Özet
Bu kapsamlı çalışma, piroliz ve kimyasal aktivasyon yoluyla atık lastiklerden aktif karbon üretilmesine odaklanmış ve ardından sulu çözeltilerden sitotoksik kanser ilacı Sunitinib'i uzaklaştırma potansiyeli incelemiştir. Sentezlenen aktif karbonun fizikokimyasal özellikleri, yüzey morfolojisi, gözenek yapısı ve yüzey kimyası dahil olmak üzere, sırasıyla SEM, BET ve pHpzcanalizleri kullanılarak titizlikle karakterize edilmiştir. Adsorban dozu, çözelti pH'ı, başlangıç konsantrasyonu ve temas süresi gibi kritik operasyonel parametrelerin adsorpsiyon verimliliği üzerindeki etkileri sistematik olarak incelenmiştir. Optimum koşullar, 40 mg/50 mL adsorban dozu, nötr pH, 50 mg/L başlangıç konsantrasyonu ve 150 dakika temas süresi olarak belirlenmiştir. Denge verileri, Langmuir izoterm modeliyle mükemmel bir uyum göstermiş ve hesaplanan maksimum adsorpsiyon kapasitesinin 65,63 mg/g olduğunu ortaya koymuştur. Termodinamik değerlendirme, sürecin spontan (ΔG° < 0) ve uygulanabilir olduğunu, endotermik bir yapıya (ΔH° = 52,30 kJ/mol) ve artan rastgelelik (ΔS° = 205,10 J/mol K) gösterdiğini doğrulamıştır. Mekanik araştırmalar, çok aşamalı bir adsorpsiyon sürecini ortaya koymuştur. Denge durumu ise fiziksel etkileşimlerle (van der Waals kuvvetleri, π–π etkileşimleri) karakterize edilmiştir. Bu bulgular, atık lastiklerden elde edilen aktif karbonun, su ortamlarından farmasötik kirleticileri gidermek için maliyet etkin ve yüksek verimli bir adsorban olarak önemli potansiyelini ortaya koymaktadır. Kinetik analiz, adsorpsiyon mekanizmasının psödo-ikinci derece modelini benimsediğini ve kimyasal adsorpsiyonun hız sınırlayıcı adım olduğunu ortaya koymuştur. Atık lastikleri değerlendirerek ve su arıtımına katkıda bulunarak, bu çalışma döngüsel ekonomi ilkeleriyle uyumlu sürdürülebilir bir çözüm sunmaktadır