SavedAdd your journal

Journals / Tekstil ve Mühendis / 2026 / Cilt: 26 Sayı: 115

Effects of Dedusting Process and Blend Ratio on the Degree of Dust Of Wilton Type Face-To-Face Carpets

Lif Karışım Oranı ve Toz Alma İşleminin Wilton Tipi Yüz-Yüze Halıların Tozuma Derecesine Etkileri

Esin Sarıoğlu0000-0003-1410-783X
Osman Babaarslan0000-0002-1606-3431
Sıdıka Ziba Or
Pages
309–317
Publication Date
2019-09-30
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

It was concluded that the carpet work compression had the highest value in the carpet produced from 100% PAN pile yarn and the compression recovery had the highest value in the carpet produced from 20/80% CV / PAN pile yarn.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Woven carpets obtained from staple pile yarns are subjected to compression and friction forces during usage.
📊
Key Findings & Data:Under the influence of these forces, the fibers that are free to twist in the yarn structure are separated from the yarn and collected on the carpet surface as loose fibers and fuzz.
💡
Conclusion & Impact:It was concluded that the carpet work compression had the highest value in the carpet produced from 100% PAN pile yarn and the compression recovery had the highest value in the carpet produced from 20/80% CV / PAN pile yarn.
🔬Design:Araştırma Makalesi
📍Scope:Comprehensive Sample
⚙️Variables:Viskon · akrilik · viskon/akrilik karışım iplikleri

Abstract

Woven carpets obtained from staple pile yarns are subjected to compression and friction forces during usage. Under the influence of these forces, the fibers that are free to twist in the yarn structure are separated from the yarn and collected on the carpet surface as loose fibers and fuzz. This change occurs on the surface of the carpet is called as dust. Today, in order to minimize the degree of carpet dust, carpet dedusting process is applied. In this study, it was aimed to determine the effects of fiber blend ratio and dedusting process on the degree of dust in carpets. Within the scope of the study, using viscose (CV) and polyacrylonitrile (PAN) fibers, 100% CV, 80/20% CV/PAN, 50/50% CV/PAN, 20/80% CV/PAN and 100% PAN pile yarns were produced in the same production parameters. Then, face-to-face Wilton carpet samples were obtained from these yarns on the same conditions. Before and after the process of dedusting of carpet samples were determined to the degree of dust. In order to determine the effects of dedusting process and blend ratio on the degree of dust, the results were statistically evaluated in 95% confidence intervals. In addition, after dedusting process, in order to investigate compressibility and resilience properties of carpet samples, work compression (j/m2) and compression recovery (%) properties were determined for each carpet sample and the results were analyzed statistically. As a result, it was determined that the dedusting process and the blend ratio had a significant effect on the degree of dust in carpets. It was concluded that the carpet work compression had the highest value in the carpet produced from 100% PAN pile yarn and the compression recovery had the highest value in the carpet produced from 20/80% CV / PAN pile yarn.

Özet

Ştapel liflerden eğrilmiş hav iplikleri kullanılarak elde edilen dokuma halılar kullanım esnasında basınç ve sürtünme

🔖

Cite This Article

Sarıoğlu, E., Babaarslan, O., Or, S. Z. (2019). Effects of Dedusting Process and Blend Ratio on the Degree of Dust Of Wilton Type Face-To-Face Carpets. Tekstil ve Mühendis, Cilt: 26 Sayı: 115, 309–317. https://ajindex.com/articles/1331840

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...