Journals / Türk Doğa ve Fen Dergisi / 2026 / Cilt: 15 Sayı: 3

Design and Experimental Evaluation of a Spring-Supported Double-Layer Piezoelectric Energy Harvester

Yay Destekli Çift Katmanlı Piezoelektrik Enerji Hasat Sisteminin Tasarımı ve Deneysel Değerlendirilmesi

Ahmet Yıldız(FIRAT ÜNİVERSİTESİ, MÜHENDİSLİK FAKÜLTESİ)0000-0002-8062-2752
Pages
205–213
Publication Date
2026-09-30
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The results showed that the spring-supported double-layer PEH produced higher electrical output than the single-layer configuration under all tested conditions.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:This study presents the design and experimental evaluation of a spring-supported double-layer piezoelectric energy harvester (PEH).
📊
Key Findings & Data:The proposed system was developed to improve energy harvesting performance using a double-layer piezoelectric disk configuration supported by compression springs.
💡
Conclusion & Impact:The results showed that the spring-supported double-layer PEH produced higher electrical output than the single-layer configuration under all tested conditions.
🔬Design:Araştırma Makalesi
📍Scope:Comprehensive Sample
⚙️Variables:Çift katmanlı PEH · Mekanik enerji hasadı · Piezoelektrik disk

Abstract

This study presents the design and experimental evaluation of a spring-supported double-layer piezoelectric energy harvester (PEH). The proposed system was developed to improve energy harvesting performance using a double-layer piezoelectric disk configuration supported by compression springs. For comparison, a conventional single-layer PEH platform was also designed and tested under the same operating conditions. Experiments were performed under applied force levels ranging from 10 to 100 N and excitation frequencies between 0.2 and 1.4 Hz. The electrical output performance of both systems was evaluated in terms of output voltage, output current, and output power. The results showed that the spring-supported double-layer PEH produced higher electrical output than the single-layer configuration under all tested conditions. At 100 N and 1.4 Hz, the output voltage increased from 20.4 V to 37.4 V, the output current increased from 0.354 mA to 0.548 mA, and the output power increased from 7.222 mW to 20.495 mW. This corresponds to a power improvement of approximately 183.8%. The proposed PEH configuration demonstrates potential for harvesting mechanical energy and serving as an auxiliary energy source for low-power electronic devices.

Özet

Bu çalışmada, yay destekli çift katmanlı piezoelektrik enerji hasat (PEH) sisteminin tasarımı ve deneysel değerlendirmesi sunulmaktadır. Önerilen sistem, sıkıştırma yayları ile desteklenen çift katmanlı piezoelektrik disk yapısı kullanılarak enerji hasat performansını artırmak amacıyla geliştirilmiştir. Karşılaştırma amacıyla, geleneksel tek katmanlı bir PEH sistemi de tasarlanmış ve aynı çalışma koşulları altında test edilmiştir. Deneyler, 10 ile 100 N arasında değişen uygulanan kuvvet seviyeleri ve 0,2 ile 1,4 Hz arasında değişen uyarma frekansları altında gerçekleştirilmiştir. Her iki sistemin elektriksel çıkış performansı, çıkış gerilimi, çıkış akımı ve çıkış gücü açısından değerlendirilmiştir. Sonuçlar, yay destekli çift katmanlı PEH'in, test edilen tüm koşullar altında tek katmanlı sisteme göre daha yüksek elektriksel çıkış ürettiğini göstermiştir. 100 N ve 1,4 Hz'de, çıkış gerilimi 20,4 V'tan 37,4 V'a, çıkış akımı 0,354 mA'dan 0,548 mA'ya ve çıkış gücü 7,222 mW'tan 20,495 mW'a yükselmiştir. Bu durum, yaklaşık %183,8'lik bir güç iyileştirmesine karşılık gelmektedir. Önerilen PEH sistemi, mekanik enerjinin hasat edilmesi ve düşük güçlü elektronik cihazlar için yardımcı bir enerji kaynağı olarak kullanılması açısından potansiyel göstermektedir.

🔖

Cite This Article

Yıldız, A. (2026). Design and Experimental Evaluation of a Spring-Supported Double-Layer Piezoelectric Energy Harvester. Türk Doğa ve Fen Dergisi, Cilt: 15 Sayı: 3, 205–213. https://doi.org/10.46810/tdfd.1991028

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (16)

  1. Omar MA. Comparison of Central and Individual Heating Systems Used for Heating Housings. TJNS 2023;12:8–16. doi:10.46810/tdfd.1235610.
  2. El E, Sayan Y. Investigating the Potential for Biogas Production from Animal Manure in Zonguldak Province. TJNS. 2026;15(1):182-91. doi:10.46810/tdfd.1811716.
  3. Srinivasulu Raju S, Srikanth M, Niranjan T, Sai PA, Mohinuddin SK. Design and Development of MEMS based Piezoelectric Energy Harvester. 2022 10th International Conference on Emerging Trends in Engineering and Technology - Signal and Information Processing (ICETET-SIP-22), 2022, p. 1–6. doi:10.1109/ICETET-SIP-2254415.2022.9791635.
  4. Sharma S, Kiran R, Azad P, Vaish R. A review of piezoelectric energy harvesting tiles: Available designs and future perspective. Energy Conversion and Management 2022;254:115272. doi:10.1016/j.enconman.2022.115272.
  5. Parinov IA, Cherpakov AV. Overview: State-of-the-Art in the Energy Harvesting Based on Piezoelectric Devices for Last Decade. Symmetry 2022;14(4):765. doi:10.3390/sym14040765.
  6. Wang M, Yin P, Li Z, Sun Y, Ding J, Luo J, et al. Harnessing energy from spring suspension systems with a compressive-mode high-power-density piezoelectric transducer. Energy Conversion and Management 2020;220:113050. doi:10.1016/j.enconman.2020.113050.
  7. Rafique S. Piezoelectric Vibration Energy Harvesting. Cham: Springer International Publishing; 2018. doi:10.1007/978-3-319-69442-9.
  8. Pan D, Li Y, Dai F. The influence of lay-up design on the performance of bi-stable piezoelectric energy harvester. Composite Structures 2017;161:227–36. doi:10.1016/j.compstruct.2016.11.026.
  9. Gautschi G. Piezoelectric Sensors. In: Gautschi G, editor. Piezoelectric Sensorics: Force Strain Pressure Acceleration and Acoustic Emission Sensors Materials and Amplifiers, Berlin, Heidelberg: Springer; 2002, p. 73–91. doi:10.1007/978-3-662-04732-3_5.
  10. Fan K, Chang J, Chao F, Pedrycz W. Design and development of a multipurpose piezoelectric energy harvester. Energy Conversion and Management 2015;96:430–9. doi:10.1016/j.enconman.2015.03.014.
  11. Younis A, Dong Z, ElBadawy M, AlAnazi A, Salem H, AlAwadhi A. Design and Development of Bladeless Vibration-Based Piezoelectric Energy–Harvesting Wind Turbine. Applied Sciences 2022;12(15):7769. doi:10.3390/app12157769.
  12. Basharat Z, Buzal MZ, Malik MH, Saleem W. Design, Fabrication and Experimental Validation of a Piezoelectric Energy Harvester for Smart Vehicles. Journal of Electronics and Electrical Engineering 2026;5(1):63–97. doi:10.37256/jeee.5120269605.
  13. Cao Y, Li J, Sha A, Liu Z, Zhang F, Li X. A power-intensive piezoelectric energy harvester with efficient load utilization for road energy collection: Design, testing, and application. Journal of Cleaner Production 2022;369:133287. doi:10.1016/j.jclepro.2022.133287.
  14. Huang K, Zhang H, Jiang J, Zhang Y, Zhou Y, Sun L, Zhang Y. The optimal design of a piezoelectric energy harvester for smart pavements. International Journal of Mechanical Sciences 2022;232:107609. doi:10.1016/j.ijmecsci.2022.107609.
  15. Ravanbod M, Ebrahimi-Nejad S. Perforated auxetic honeycomb booster with reentrant chirality: A new design for high-efficiency piezoelectric energy harvesting. Mechanics of Advanced Materials and Structures 2024;31(27):9857–72. doi:10.1080/15376494.2023.2280997.
  16. Piezo Disc 50mm with Cable. Ece Egitim ve Ders Gerecleri; 2022. Available from: https://eceegitim.com.tr/en/urun/ece-egitim-proje-steam-materyalleri-piezo-disk-50mm-capinda-kablolu