SavedAdd your journal

Journals / Niğde Ömer Halisdemir Üniversitesi Mühendislik Bilimleri Dergisi / 2024 / Cilt: 13 Sayı: 4

Structure of indium-doped LATP solid electrolyte and effect of doping on ionic conductivity

İndiyum katkılı LATP katı elektrolitinin yapısı ve katkılamanın iyonik iletkenlik üzerindeki etkisi

Fatih Öksüzoğlu(TARSUS ÜNİVERSİTESİ, LİSANSÜSTÜ EĞİTİM ENSTİTÜSÜ)0000-0003-0869-2606
Gültekin Çelik(SELÇUK ÜNİVERSİTESİ, FEN FAKÜLTESİ)0000-0001-8587-322X
Pages
1428–1434
Publication Date
2024-10-15
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The results show that indium doping, despite the relatively lower ionic conductivity compared to LATP, can still promote the development of solid electrolytes for all-solid-state lithium ion batteries.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:For solid-state batteries, improving calcination techniques to improve ionic conductivity at room temperature and appropriate element doping to the solid electrolyte system have been widely proposed.
📊
Key Findings & Data:Element doping is one of the most accurate methods to improve the physicochemical and electrochemical properties of LATP solid electrolytes.
💡
Conclusion & Impact:The results show that indium doping, despite the relatively lower ionic conductivity compared to LATP, can still promote the development of solid electrolytes for all-solid-state lithium ion batteries.
🔬Design:Araştırma Makalesi
📍Scope:Comprehensive Sample
⚙️Variables:Katı hal batarya · İndiyum katkısı · Seramikler

Abstract

For solid-state batteries, improving calcination techniques to improve ionic conductivity at room temperature and appropriate element doping to the solid electrolyte system have been widely proposed. Element doping is one of the most accurate methods to improve the physicochemical and electrochemical properties of LATP solid electrolytes. The doping of indium at the titanium site in the LATP system has not been extensively studied. It is hypothesised that indium can increase the lattice volume with its larger ionic radius and thus increase the ionic conductivity. In this study, the ionic conductivity of 10% indium doped LiAlTi(PO4)3 (LATP) solid electrolyte was investigated. The synthesised LiAlInTi(PO4)3 (LAITP) solid electrolyte was characterised in terms of crystal structure, morphological properties and Li+ ion conductivity using X-ray diffraction (XRD), scanning electron microscopy (SEM) and electrochemical impedance spectroscopy (EIS), respectively. The results show that indium doping, despite the relatively lower ionic conductivity compared to LATP, can still promote the development of solid electrolytes for all-solid-state lithium ion batteries.

Özet

Katı hal piller için, oda sıcaklığında iyonik iletkenliği iyileştirmek için kalsinasyon tekniklerini iyileştirmek ve katı elektrolit sistemine uygun element katkısı yaygın olarak önerilmiştir. Element katkısı, LATP katı elektrolitlerinin fizikokimyasal ve elektrokimyasal özelliklerini artırmak için en doğru yöntemlerdendir. LATP sistemindeki titanyum bölgesinde indiyum katkısı kapsamlı bir şekilde incelenmemiştir. İndiyumun daha büyük iyonik yarıçapı ile kafes hacmini artırabileceği ve böylece iyonik iletkenliği artırabileceği varsayılmaktadır. Bu çalışmada, %10 indiyum katkılı LiAlTi(PO4)3 (LATP) katı elektrolitinin iyonik iletkenliği incelenmiştir. Sentezlenen LiAlInTi(PO4)3 (LAITP) katı elektrolit, sırasıyla X-ışını kırınımı (XRD), taramalı elektron mikroskobu (SEM) ve elektrokimyasal empedans spektroskopisi (EIS) kullanılarak kristal yapısı, morfolojik özellikleri ve Li+ iyon iletkenliği açısından karakterize edilmiştir. Sonuçlar, indiyum katkısının LATP'ye kıyasla nispeten daha düşük iyonik iletkenliğe rağmen, yine de tamamen katı hal lityum iyon piller için katı elektrolitlerin geliştirilmesini teşvik edebileceğini göstermektedir.

🔖

Cite This Article

Öksüzoğlu, F., Çelik, G. (2024). Structure of indium-doped LATP solid electrolyte and effect of doping on ionic conductivity. Niğde Ömer Halisdemir Üniversitesi Mühendislik Bilimleri Dergisi, Cilt: 13 Sayı: 4, 1428–1434. https://doi.org/10.28948/ngumuh.1495188

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (36)

  1. Thangadurai, V., Pinzaru, D., Narayanan, S., Baral, A.K.: Fast solid-state Li ion conducting garnet-type structure metal oxides for energy storage. The journal of physical chemistry letters. 6, 292–299, 2015. https://doi.org/10.1021/jz501828v
  2. Liu, Q., Geng, Z., Han, C., Fu, Y., Li, S., He, Y., Kang, F., Li, B.: Challenges and perspectives of garnet solid electrolytes for all solid-state lithium batteries. Journal of Power Sources. 389, 120–134, 2018. https://doi.org/10.1016/j.jpowsour.2018.04.019
  3. Kumar, B., Scanlon, L.G.: Polymer-ceramic composite electrolytes. Journal of power sources. 52, 261–268, 1994. https://doi.org/10.1016/0378-7753(94)02147-3
  4. Tan, S.-J., Zeng, X.-X., Ma, Q., Wu, X.-W., Guo, Y.-G.: Recent advancements in polymer-based composite electrolytes for rechargeable lithium batteries. Electrochemical Energy Reviews. 1, 113–138, 2018. https://doi.org/10.1007/s41918-018-0011-2
  5. Schnell, J., Günther, T., Knoche, T., Vieider, C., Köhler, L., Just, A., Keller, M., Passerini, S., Reinhart, G.: All-solid-state lithium-ion and lithium metal batteries–paving the way to large-scale production. Journal of Power Sources. 382, 160–175, 2018. https://doi.org/10.1016/j.jpowsour.2018.02.062
  6. Wu, J., Rao, Z., Cheng, Z., Yuan, L., Li, Z., Huang, Y.: Ultrathin, flexible polymer electrolyte for cost‐effective fabrication of all‐solid‐state lithium metal batteries. Advanced Energy Materials. 9, 1902767, 2019. https://doi.org/10.1002/aenm.201902767
  7. Murata, K., Izuchi, S., Yoshihisa, Y.: An overview of the research and development of solid polymer electrolyte batteries. Electrochimica acta. 45, 1501–1508, 2000.https://doi.org/10.1016/S0013-4686(99) 00365-5
  8. Xu, R.C., Xia, X.H., Zhang, S.Z., Xie, D., Wang, X.L., Tu, J.P.: Interfacial challenges and progress for inorganic all-solid-state lithium batteries. Electrochimica Acta. 284, 177–187, 2018.https:// doi.org/10.1016/j.electacta.2018.07.191
  9. Wang, Q., Ping, P., Zhao, X., Chu, G., Sun, J., Chen, C.: Thermal runaway caused fire and explosion of lithium ion battery. Journal of power sources. 208, 210–224, 2012.https://doi.org/10.1016/j.jpow sour.20 12.02.03
  10. Gao, Z., Sun, H., Fu, L., Ye, F., Zhang, Y., Luo, W., Huang, Y.: Promises, Challenges, and Recent Progress of Inorganic Solid‐State Electrolytes for All‐Solid‐State Lithium Batteries. Advanced Materials. 30, 1705702, 2018. https://doi.org/10.1002/adma.201705702
  11. Richards, W.D., Miara, L.J., Wang, Y., Kim, J.C., Ceder, G.: Interface stability in solid-state batteries. Chemistry of Materials. 28, 266–273, 2016. https://doi.org/10.1021/acs.chemmater.5b04082
  12. Yu, X., Manthiram, A.: Electrode–electrolyte interfaces in lithium-based batteries. Energy & Environmental Science. 11, 527–543, 2018. https://doi.org/10.1039/C7EE02555F
  13. Tan, D.H., Banerjee, A., Chen, Z., Meng, Y.S.: From nanoscale interface characterization to sustainable energy storage using all-solid-state batteries. Nature nanotechnology. 15, 170–180, 2020. https://doi.org/ 10.1038/s41565-020-0657-x
  14. Mariappan, C.R., Yada, C., Rosciano, F., Roling, B.: Correlation between micro-structural properties and ionic conductivity of Li1. 5Al0. 5Ge1. 5 (PO4) 3 ceramics. Journal of Power Sources. 196, 6456–6464, 2011. https://doi.org/10.1016/j.jpowsour.2011.03.0 65
  15. Kumar, B., Thomas, D., Kumar, J.: Space-charge-mediated superionic transport in lithium ion conducting glass–ceramics. Journal of The Electrochemical Society. 156, A506, 2009. https:// doi.org/10.114/1.3122903
  16. Liu, J., Liu, T., Pu, Y., Guan, M., Tang, Z., Ding, F., Xu, Z., Li, Y.: Facile synthesis of NASICON-type Li 1.3 Al 0.3 Ti 1.7 (PO 4) 3 solid electrolyte and its application for enhanced cyclic performance in lithium ion batteries through the introduction of an artificial Li 3 PO 4 SEI layer. RSC Advances. 7, 46545–46552, 2017. https://doi.org/10.1039/C7RA0 9335G
  17. Waetzig, K., Rost, A., Heubner, C., Coeler, M., Nikolowski, K., Wolter, M., Schilm, J.: Synthesis and sintering of Li1. 3Al0. 3Ti1. 7 (PO4) 3 (LATP) electrolyte for ceramics with improved Li+ conductivity. Journal of Alloys and Compounds. 818, 153237, 2020. https://doi.org/10.1039/C7RA09335G
  18. Epp, V., Ma, Q., Hammer, E.-M., Tietz, F., Wilkening, M.: Very fast bulk Li ion diffusivity in crystalline Li 1.5 Al 0.5 Ti 1.5 (PO 4) 3 as seen using NMR relaxometry. Physical Chemistry Chemical Physics. 17, 32115–32121, 2015. https://doi.org/ 10.1039/C5CP05337D
  19. Öksüzoğlu, F., Ateş, Ş., Özkendir, O.M., Çelik, G., Eker, Y.R., Baveghar, H.: Structure and ionic conductivity of NASICON-type LATP solid electrolyte synthesized by the solid-state method. Ceramics International., 2024. https://doi.org/10.1 016/j.ceramint.2024.05.450
  20. Siller, V., Morata, A., Eroles, M.N., Arenal, R., Gonzalez-Rosillo, J.C., del Amo, J.M.L., Tarancón, A.: High performance LATP thin film electrolytes for all-solid-state microbattery applications. Journal of Materials Chemistry A. 9, 17760–17769, 2021. https://doi.org/10.1039/D1TA02991F
  21. Arbi, K., Mandal, S., Rojo, J.M., Sanz, J.: Dependence of Ionic Conductivity on Composition of Fast Ionic Conductors Li 1+ x Ti 2 - x Al x (PO 4 ) 3, 0 ≤ x ≤ 0.7. A Parallel NMR and Electric Impedance Study. Chem. Mater. 14, 1091–1097, 2002. https:// doi.org/10.1021/cm010528i
  22. Mariappan, C.R., Gellert, M., Yada, C., Rosciano, F., Roling, B.: Grain boundary resistance of fast lithium ion conductors: comparison between a lithium-ion conductive Li–Al–Ti–P–O-type glass ceramic and a Li1. 5Al0. 5Ge1. 5P3O12 ceramic. Electrochemistry Communications. 14, 25–28, 2012. https://doi.org/10.1016/j.elecom.2011.10.022
  23. Campanella, D., Krachkovskiy, S., Faure, C., Zhu, W., Feng, Z., Savoie, S., Girard, G., Demers, H., Vijh, A., George, C., Armand, M., Belanger, D., Paolella, A.: Influence of AlPO 4 Impurity on the Electrochemical Properties of NASICON‐Type Li 1.5 Al 0.5 Ti 1.5 (PO 4 ) 3 Solid Electrolyte. ChemElec troChem. 9, e202200984, 2022. https://doi.org/10.10 02/celc.202200984
  24. Li, J., Liu, C., Miao, C., Kou, Z., Xiao, W.: Enhanced ionic conductivity and electrochemical stability of Indium doping Li1.3Al0.3Ti1.7(PO4)3 solid electrolytes for all-solid-state lithium-ion batteries. Ionics. 28, 63–72, 2022. https://doi.org/10.1007/s1 1581-021-04310-8
  25. Zhao, E., Guo, Y., Xu, G., Yuan, L., Liu, J., Li, X., Yang, L., Ma, J., Li, Y., Fan, S.: High ionic conductivity Y doped Li1. 3Al0. 3Ti1. 7 (PO4) 3 solid electrolyte. Journal of Alloys and Compounds. 782, 384–391, 2019. https://doi.org/10.1016/j.jall com.2018.12.183
  26. Krasnikova, I.V., Pogosova, M.A., Sanin, A.O., Stevenson, K.J.: Toward Standardization of Electrochemical Impedance Spectroscopy Studies of Li-Ion Conductive Ceramics. Chem. Mater. 32, 2232–2241,2020. https://doi.org/10.1021/acs.chemmater.9b04899
  27. Öksüzoğlu, F., Ateş, Ş., Özkendir, O.M., Çelik, G., Eker, Y.R., Baveghar, H., Basyooni-M. Kabatas, M.A.: The Impact of Boron Compounds on the Structure and Ionic Conductivity of LATP Solid Electrolytes. Materials. 17, 3846, 2024. https:// doi.org/10.3390/ma17153846
  28. Li, X., Zhou, Y., Tang, J., Zhao, S., Zhang, J., Huang, X., Tian, B.: Optimizing Li 1.3 Al 0.3 Ti 1.7 (PO 4 ) 3 Particle Sizes toward High Ionic Conductivity. ACS Appl. Mater. Interfaces. 15, 36289–36300, 2023. https://doi.org/10.1021/acsami.3c06675
  29. Shen, S.-P., Tang, G., Li, H.-J., Zhang, L., Zheng, J.-C., Luo, Y., Yue, J.-P., Shi, Y., Chen, Z.: Low-temperature fabrication of NASICON-type LATP with superior ionic conductivity. Ceramics International. 48, 36961–36967, 2022. https://doi. org/10.1016/j.ceramint.2022.08.264
  30. Kwatek, K., Nowiński, J.L.: Electrical properties of LiTi2 (PO4) 3 and Li1. 3Al0. 3Ti1. 7 (PO4) 3 solid electrolytes containing ionic liquid. Solid State Ionics. 302, 54–60, 2017. https://doi.org/10.1016/j.ssi.2016.11.020
  31. Lin, Y., Luo, N., Quattrocchi, E., Ciucci, F., Wu, J., Kermani, M., Dong, J., Hu, C., Grasso, S.: Ultrafast high-temperature sintering (UHS) of Li1. 3Al0. 3Ti1. 7 (PO4) 3. Ceramics International. 47, 21982–21987, 2021. https://doi.org/10.1016/j.ceramint.2021.04.216
  32. Gunamony, J., Walle, K.Z., Kotobuki, M.: Influence of mixing technique on properties of Li1. 3Al0. 3Ti1. 7 (PO4) 3 solid electrolyte prepared by the solid-state reaction-A comparison of dry 3D mixing technique with wet ball-milling. Solid State Ionics. 410, 116528, 2024. https://doi.org/10.1016/j.ssi.2024.116 528
  33. Li, J., Liu, C., Miao, C., Kou, Z., Xiao, W.: Enhanced ionic conductivity and electrochemical stability of Indium doping Li 1.3 Al 0.3 Ti 1.7 (PO 4) 3 solid electrolytes for all-solid-state lithium-ion batteries. Ionics. 1–10, 2022. https://doi.org/10.1007/s11581-0 21-04310-8
  34. Arbi, K., Mandal, S., Rojo, J.M., Sanz, J.: Dependence of Ionic Conductivity on Composition of Fast Ionic Conductors Li 1+ x Ti 2 - x Al x (PO 4 ) 3, 0 ≤ x ≤ 0.7. A Parallel NMR and Electric Impedance Study. Chem. Mater. 14, 1091–1097, 2002. https:// doi.org/10.1021/cm010528i
  35. Mariappan, C.R., Gellert, M., Yada, C., Rosciano, F., Roling, B.: Grain boundary resistance of fast lithium ion conductors: comparison between a lithium-ion conductive Li–Al–Ti–P–O-type glass ceramic and a Li1. 5Al0. 5Ge1. 5P3O12 ceramic. Electrochemistry Communications. 14, 25–28, 2012. https://doi.org/10.1016/j.elecom.2011.10.022
  36. Kwatek, K., Nowiński, J.L.: Electrical properties of LiTi2 (PO4) 3 and Li1. 3Al0. 3Ti1. 7 (PO4) 3 solid electrolytes containing ionic liquid. Solid State Ionics. 302, 54–60, 2017. https://doi.org/10.1016/j.ssi.2016.11.020