SavedAdd your journal

Journals / Niğde Ömer Halisdemir Üniversitesi Mühendislik Bilimleri Dergisi / 2026 / Cilt: 14 Sayı: 3

Machinability performance when milling shape memory alloys at conventional speeds

Eş atomlu NiTi şekil hafızalı alaşımların geleneksel hızlarda frezelenmesinde işlenebilirlik performansı

Eren Kaya(ESKİŞEHİR TEKNİK ÜNİVERSİTESİ, MÜHENDİSLİK FAKÜLTESİ)0000-0003-4128-8162
İrfan Kaya(ESKİŞEHİR TEKNİK ÜNİVERSİTESİ, MÜHENDİSLİK FAKÜLTESİ)0000-0002-1102-2999
Pages
932–936
Publication Date
2025-07-15
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

This is true for both WC and coated WC cutting tools

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Machining NiTi shape memory alloy parts is a process that requires special care to avoid damaging the functional properties of these alloys.
📊
Key Findings & Data:By choosing the right cutting parameters and using appropriate cooling methods, machining NiTi alloys can produce high quality and precision parts In order to examine the performance of various cutting tool materials, different insert materials were used and indexable insert cutting tools were preferred.
💡
Conclusion & Impact:This is true for both WC and coated WC cutting tools
🔬Design:Araştırma Makalesi
📍Scope:Comprehensive Sample
⚙️Variables:Frezeleme · NiTi · Takım Aşınması

Abstract

Machining NiTi shape memory alloy parts is a process that requires special care to avoid damaging the functional properties of these alloys. By choosing the right cutting parameters and using appropriate cooling methods, machining NiTi alloys can produce high quality and precision parts In order to examine the performance of various cutting tool materials, different insert materials were used and indexable insert cutting tools were preferred. Within the scope of conventional cutting speeds, Vc = 25, 50, 75, 100 m/min cutting speeds were investigated. In the range of low cutting speeds, it is observed that the tool life increases with increasing the cutting speed. This is true for both WC and coated WC cutting tools

Özet

NiTi şekil hafızalı alaşımlarının talaşlı imalatı, bu malzemelerin fonksiyonel özelliklerini koruyabilmek için özel bir hassasiyet gerektiren bir işlemdir. Uygun kesme parametrelerinin belirlenmesi ve etkili soğutma yöntemlerinin kullanılması, NiTi alaşımlarının talaşlı işlenmesi sırasında yüksek hassasiyetli ve kaliteli parçaların elde edilmesini mümkün kılmaktadır. Farklı kesici takım malzemelerinin performanslarını değerlendirmek amacıyla çeşitli kesici uç malzemeleri kullanılmış olup, kesi uçların değiştirilebildiği takım sistemleri tercih edilmiştir. Geleneksel kesme hızları kapsamında Vc = 25, 50, 75 ve 100 m/dk değerleri incelenmiştir. Düşük kesme hızlarında, kesme hızının artışıyla birlikte takım ömrünün uzadığı gözlemlenmiştir. Bu eğilim, hem karbür hem de kaplamalı karbür kesici takımlar için geçerli bir durumdur.

🔖

Cite This Article

Kaya, E., Kaya, İ. (2025). Machinability performance when milling shape memory alloys at conventional speeds. Niğde Ömer Halisdemir Üniversitesi Mühendislik Bilimleri Dergisi, Cilt: 14 Sayı: 3, 932–936. https://doi.org/10.28948/ngumuh.1649015

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (17)

  1. D. Stoeckel, Shape memory actuators for automotive applications. Materials & Design, 11(6), 302-307, 1990. https://doi.org/10.1016/0261-3069(90)90013-A
  2. F. Butera, A. Coda and G. Vergani, Shape memory actuators for automotive applications. Nanotec IT newsletter. Roma: AIRI/nanotec IT, 12-6, 2007.
  3. C. Bil, K. Massey, and E.J. Abdullah, Wing morphing control with shape memory alloy actuators. Journal of Intelligent Material Systems and Structures, 24(7), 879-898, 2013.https://doi.org/10.1177/1045389X12471866
  4. D.J. Hartl, and D.C. Lagoudas, Aerospace applications of shape memory alloys. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, 221(4), 535-552, 2007. https://doi.or g/10.1243/09544100JAERO211
  5. L. Petrini and F. Migliavacca, Biomedical applications of shape memory alloys. Journal of Metallurgy, 2011. https://doi.org/10.1155/2011/501483
  6. A. Kaya, İ. Kaya and H.E. Karaca, U-Shape Slot Antenna Design with High-Strength Ni54Ti46 Alloy. Arabian Journal for Science and Engineering, 41(9), 3297-3307, 2016. https://doi.org/10.1007/s13369-015-1819-2
  7. A. Kaya, İ. Kaya and H.E. Karaca, Radio Frequency U‐Shape Slot Antenna Design with Niti Shape Memory Alloys. Microwave and Optical Technology Letters, 55(12), 2976-2984, 2013. https://doi.org/10.1002/ mop.27977
  8. Y. Furuya, Design and material evaluation of shape memory composites. Journal of intelligent material systems and structures, 7(3), 321-330, 1996. https://doi.org/10.1177/1045389X9600700313
  9. M. Kohl, E. Just, W. Pfleging and S. Miyazaki, SMA microgripper with integrated antagonism. Sensors and Actuators A: Physical, 83(1), 208-213, 2000. https://doi.org/10.1016/S0924-4247(99)00385-4
  10. H. Kahn, M. Huff and A. Heuer, The TiNi shape-memory alloy and its applications for MEMS. Journal of Micromechanics and Microengineering, 8(3), 213, 1998. https://doi.org/10.1088/0960-1317/8/3/007
  11. M.H. Elahinia, M. Hashemi, M., Tabesh and S.B. Bhaduri, Manufacturing and processing of NiTi implants: a review. Progress in materials science, 57(5), 911-946, 2012. https://doi.org/10.1016/j.pmatsci.20 11.11.001
  12. H. Huang, A study of high-speed milling characteristics of nitinol. Materials and Manufacturing Processes, 19(2), 159-175, 2004. https://doi.org/10.1081/AMP-120029849
  13. K. Weinert and V. Petzoldt, Machining of NiTi based shape memory alloys. Materials Science and Engineering: A, 378(1), 180-184, 2004. https://doi.org/10.1016/j.msea.2003.10.344
  14. E.O. Ezugwu, J. Bonney and Y. Yamane, An overview of the machinability of aeroengine alloys. Journal of Materials Processing Technology, 134(2), 233-253, 2003. https://doi.org/10.1016/S0924-0136(02)01042-7
  15. Y. Guo, A. Klink, C. Fu and J. Snyder, Machinability and surface integrity of Nitinol shape memory alloy. CIRP Annals-Manufacturing Technology, 62(1), 83-86, 2013. https://doi.org/10.1016/j.cirp.2013.03.004
  16. K. Weinert, V. Petzoldt and D. Kötter, Turning and drilling of NiTi shape memory alloys. CIRP Annals-Manufacturing Technology, 53(1), 65-68, 2004. https://doi.org/10.1016/S0007-8506(07)60646-5
  17. E.Kaya, Farklı kesici takım malzemeleri kullanarak NiTi şekil hafızalı alaşımların işlenebilirlik davranışlarının araştırılması ve performans parametrelerinin incelenmesi. Yüksek Lisans Tezi, Eskişehir Teknik Üniversitesi, Lisansüstü Eğitim Enstitüsü, Türkiye, 2019.