✨
AI Summary & Key Takeaways
AI Insight⚡ TL;DR(Too Long; Didn't Read)
Scanning electron microscope (SEM) images of the samples were examined and Energy-dispersive X-ray spectroscopy (EDS) analysis were performed.
📌 3 Key Takeaways
🎯
Objective & Hypothesis:Magnesium and its alloys are among the important research topics in terms of low density, large damping capacity, recyclability, and dimensional stability.
📊
Key Findings & Data:The contact of Magnesium with oxygen easily causes the formation of Magnesium oxide.
💡
Conclusion & Impact:Scanning electron microscope (SEM) images of the samples were examined and Energy-dispersive X-ray spectroscopy (EDS) analysis were performed.
🔬Design:Conference Paper
📍Scope:Comprehensive Sample
⚙️Variables:Magnesium · Mechanical Milling · Microstructural Properties
Abstract
Magnesium and its alloys are among the important research topics in terms of low density, large damping capacity, recyclability, and dimensional stability. The contact of Magnesium with oxygen easily causes the formation of Magnesium oxide. In this study, the Magnesium metal purchased in powder form was grinded by mechanical milling method for various hours. The effect of milling times on Mg/MgO powder composite formation was investigated. Scanning electron microscope (SEM) images of the samples were examined and Energy-dispersive X-ray spectroscopy (EDS) analysis were performed.
🔖
Cite This Article
Yahşi, Y., İpek, R. (2022). Effect Of Ball Milling Time on Microstructural Properties of Mg/MgO. Hacettepe Journal of Biology and Chemistry, Volume: 50 Issue: 3 Special Issue. https://doi.org/10.15671/hjbc.1032620