Journals / El-Cezeri / 2019 / Cilt: 6 Sayı: 3

Investigation of Ballistic Behavior of Agricultural Waste Doped Hybrid Composite Plates in Vacuum Infusion Method

Journal
El-Cezeri
Pages
881–893
Publication Date
2019-09-30
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Due to the security, only the photographs of the ballistic test results were allowed to be shared.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:The vacuum infusion method is used in the production of ballistic composite materials, in the repair of aircraft parts and in the production of layered hybrid composite materials.
📊
Key Findings & Data:In this study, production of hybrid composite materials including apricot kernel shell powder, hazelnut shell powder, walnut shell powder and graphene nanopowder added layer were made by vacuum infusion method.
💡
Conclusion & Impact:Due to the security, only the photographs of the ballistic test results were allowed to be shared.
🔬Design:Araştırma Makalesi
📍Scope:Comprehensive Sample
⚙️Variables:Kayısı çekirdeği kabuğu tozu · fındık kabuğu tozu · Apricot kernel shell powder

Abstract

The vacuum infusion method is used in the production of ballistic composite materials, in the repair of aircraft parts and in the production of layered hybrid composite materials. In this study, production of hybrid composite materials including apricot kernel shell powder, hazelnut shell powder, walnut shell powder and graphene nanopowder added layer were made by vacuum infusion method. Layered hybrid composite samples with pure graphene nanopowder added and different shell powder added were produced. Then the produced hybrid composite samples were subjected to ballistic experiments. Due to the security, only the photographs of the ballistic test results were allowed to be shared.

Özet

Vakum infüzyon yöntemi, balistik kompozit malzemelerin üretiminde, uçak parçalarının onarımında ve katmanlı hibrit kompozit malzemelerin üretiminde kullanılır. Bu çalışmada kayısı çekirdeği kabuğu tozu, fındık kabuğu tozu, ceviz kabuğu tozu ve grafen nanotozu katkılı tabaka içeren hibrit kompozit malzemelerin üretimi vakum infüzyon yöntemi ile yapılmıştır. Saf grafen nanopowder eklenmiş ve farklı kabuk tozu eklenmiş katmanlı hibrit kompozit numuneler üretildi. Daha sonra üretilen hibrit kompozit numuneler balistik deneylere tabi tutulmuştur. Güvenlik nedeniyle, yalnızca balistik test sonuçlarının fotoğraflarının paylaşılmasına izin verilmiştir.

🔖

Cite This Article

Bahçe, H. T., Temiz, Ş. (2019). Investigation of Ballistic Behavior of Agricultural Waste Doped Hybrid Composite Plates in Vacuum Infusion Method. El-Cezeri, Cilt: 6 Sayı: 3, 881–893. https://doi.org/10.31202/ecjse.549414

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (1)

  1. Yavaş, M.O., “ Hafif Silahlara Karşı Bireysel Savunma Amaçlı Kompozit Malzeme Tasarımı ve Balistik Dayanımı”, Yüksek Lisans Tezi, Selçuk Üniversitesi, Fen Bilimleri Enstitüsü,(2009).[2] Lane, R. A., High Performance Fiber for Personel and Vehicle Armor Systems, Amptiac, USA, (2005) [3] Shokrieh, M.M. and Javadpour, “G.H. Penetration analysis of a projectile in ceramic composite armor, Composite Structures, 2008, 82(2): 269-276[5] Ernest, S.C., “Army focused research team on functionally graded armor composites, Materials Science and Engineering, 1999, 259(2): 155-161[5] Anderson J., C.E. and Bodner, S.R. “Ballistic impact: The status of analytical and numerical modeling, International Journal of Impact Engineering, 1988,7(1): 9-35[6] Wetzela, B., Hauperta, F. and Zhang, M.Q. “Epoxy nanocomposites with high mechanical and tribological performance, Composites Science and Technology, 2003, 63(20): 2055-2067.[5] Carr, D.J., “ Failure mechanisms of yarns subjected to ballistic impact. Jornal of Materials Science Letters, 1999, 18: 585-588.[7] R.D.S.G. Campilho, “ Natural Fiber Composites ”, 1st Edition, CRC Press Published, (2015).[8] Shokrieh, M.M., Esmkhani, M., Haghighatkhah, A.R. and Zhao, Z., “Flexural fatigue behavior of synthesized graphene/carbon-nanofiber/epoxy hybrid nanocomposites. Materials & Design, (2014), 64(4):401–408.[9] Jones, R. M. “Mechanics Of Composite Materials”, 2 nd Edition,(1999).