Journals / El-Cezeri / 2020 / Cilt: 7 Sayı: 2

Synthesis of ARCFe3O4 Nanocomposites for Removal of Hazardous Dye from Aqueous Media

Sulu Çözeltiden Metilen Mavisinin Giderilmesi için ARCFe3O4 Nanokompozitlerinin Sentezlenmesi

Kadriye Bozgeyik(BÜLENT ECEVİT ÜNİVERSİTESİ, FEN EDEBİYAT FAKÜLTESİ, KİMYA BÖLÜMÜ)0000-0002-1958-2974
Atakan Toprak(ZONGULDAK BÜLENT ECEVİT ÜNİVERSİTESİ)
Journal
El-Cezeri
Pages
667–678
Publication Date
2020-05-31
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

It was found that all ARCFe3O4 x/MB systems are compatible with the pseudo-first order kinetic model.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Magnetic (Fe3O4) coal nanocomposites obtained using thermal method in one-step and the removal of methylene blue (MB) was investigated.
📊
Key Findings & Data:ARCFe3O4 x composites were synthesized in four different ratios (x = 0.5, 1, 2 and 3) of Fe(NO3)3. 9H2O.
💡
Conclusion & Impact:It was found that all ARCFe3O4 x/MB systems are compatible with the pseudo-first order kinetic model.
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:Kömür · manyetik nanokompozit · adsorpsiyon izotermleri

Abstract

Magnetic (Fe3O4) coal nanocomposites obtained using thermal method in one-step and the removal of methylene blue (MB) was investigated. ARCFe3O4 x composites were synthesized in four different ratios (x = 0.5, 1, 2 and 3) of Fe(NO3)3. 9H2O. The nanocomposites were characterized by scanning electron microscope (SEM), X-ray diffraction (XRD) and N2 adsorption. Equilibrium and rate experiments of ARCFe3O4 x composites were carried out in batch system. Experimental equilibrium analysis was compared with Langmuir and Freundlich isotherm models. In addition, nanocomposite/MB system has been determined for pseudo-first and second degree kinetic models. It was found that all ARCFe3O4 x/MB systems are compatible with the pseudo-first order kinetic model.

Özet

Tek basamakta termal yöntem ile elde edilen manyetik (Fe3O4) kömür nanokompozitleri üzerine metilen mavisinin (MB) adsorpsiyonu incelenmiştir. ARCFe3O4 x kompozitleri Fe(NO3)3. 9H2O’ün dört farklı (x = 0.5, 1, 2 ve 3) oran olacak şekilde sentezlenmiştir. Nanokompozitler, taramalı elektron mikroskobu (SEM), X-ışını kırınımı (XRD) ve N2 adsorpsiyonu ile karakterize edilmişlerdir. ARCFe3O4 x kompozitlerinin denge ve hız deneyleri kesikli sistemde gerçekleştirilmiştir. Deneysel denge verileri Langmuir ve Freundlich izoterm modelleri ile karşılaştırılmıştır. Ayrıca nanokompozitlerin/MB pseudo-birinci ve ikinci derece kinetik modellere uygunluğu analiz edilmiştir. Tüm ARCFe3O4 x/MB sistemlerinin pseudo-birinci derece kinetik modeli ile uyumlu olduğu bulunmuştur.

🔖

Cite This Article

Bozgeyik, K., Toprak, A. (2020). Synthesis of ARCFe3O4 Nanocomposites for Removal of Hazardous Dye from Aqueous Media. El-Cezeri, Cilt: 7 Sayı: 2, 667–678. https://doi.org/10.31202/ecjse.689309

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (12)

  1. Deniz, F., Karaman, S., ‘Removal of Basic Red 46 dye from aqueous solution by pine tree leaves’, Chemical Engineering Journal, 2011, 170: 67–74.
  2. Deng, H., Lu, J., Li, G., Zhang, G., Wang, X., ‘Adsorption of methylene blue on adsorbent materials produced from cotton stalk’, Chemical Engineering Journal, 2011, 172: 326– 334.
  3. Chen, L., Ramadan, A., Lü, L., Shao, W., Luo, F. and Chen J., ‘Biosorption of methylene blue from aqueous aolution using lawny grass modified with citric acid’, Journal of Chemical & Engineering Data, 2011, 56: 3392–3399.
  4. Zarezadeh-Mehrizi, M., & Badiei, A., ‘Highly efficient removal of basic blue 41 with nanoporous silica’, Water Resources and Industry, 2014, 5: 49-57.
  5. Ma, H., Li, J. B., Liu, W. W., Miao, M., Cheng, B. J., & Zhu, S. W., ‘Novel synthesis of a versatile magnetic adsorbent derived from corncob for dye removal’, Bioresource technology, 2015, 190: 13-20.
  6. Kopac, T., and Toprak A., ‘Preparation of activated carbons from Zonguldak region coals by physical and chemical activations for hydrogen sorption’, International Journal of Hydrogen Energy, 2007, 32(18): 5005-5014.
  7. Gregg, S. J., and Sing, K. S. W., ‘Adsorption, surface area, and porosity’, 2nd Ed., London, UK: Academic Press, 1991.
  8. Sing, K., ‘The use of nitrogen adsorption for the characterisation of porous materials’, Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2001, 187: 3-9.
  9. Chaki, S. H., Malek, T. J., Chaudhary, M. D., Tailor, J. P., & Deshpande, M. P., ‘Magnetite Fe3O4 nanoparticles synthesis by wet chemical reduction and their characterization’, Advances in Natural Sciences: Nanoscience and Nanotechnology, 2015, 6(3): 035009.
  10. Al-Degs, Y. S., El-Barghouthi, M. I., El-Sheikh, A. H., Walker, G.M., ‘Effect of solution pH, ionic strength, and temperature on adsorption behavior of reactive dyes on activated carbon’, Dyes and Pigments, 2007, 77: 16-23. Saroyan, H. S., Giannakoudakis, D. A., Sarafidis, C.S., Lazaridis, N. K., and Deliyanni E. A., ‘Effective impregnation for the preparation of magnetic mesoporous carbon: application to dye adsorption’, J Chem Technol Biotechnol.,2017, 92(8): 1899-1911.
  11. Liu, T., Li Y., Du, Q., Suna, J., Jiao Y., Yanga, G., Wang, Z., Xia, Y., Zhang, W., Wang, K., Zhu, H., Wu D., ‘Adsorption of methylene blue from aqueous solution by graphene’, Colloids and Surfaces B: Biointerfaces, 2012, 90:197-203.
  12. Ho, Y.S., McKay G., ‘Pseudo-second order model for sorption processes’, Process Biochemistry, 1999, 34: 451–465.