Journals / El-Cezeri / 2020 / Cilt: 7 Sayı: 3

Optimum Production and Characterization of Biodiesel from Spirogyra Algae

Journal
El-Cezeri
Pages
1529–1541
Publication Date
2020-09-30
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Characterizations done confirmed good suitability with conventional diesel properties and standards.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:This particular work focused on the optimum production and characterization of biodiesel from Spirogyra.
📊
Key Findings & Data:Optimum values for the solvent to biomass ratio, extraction temperature and time were 15 ml/g, 100 oC and 30 minutes respectively.
💡
Conclusion & Impact:Characterizations done confirmed good suitability with conventional diesel properties and standards.
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:Biodiesel · Spirogyra · optimization

Abstract

This particular work focused on the optimum production and characterization of biodiesel from Spirogyra. Parametric optimization with Minitab software was used to design the experiment using Central Composite Design (CCD). Optimum values for the solvent to biomass ratio, extraction temperature and time were 15 ml/g, 100 oC and 30 minutes respectively. Careful and practicable implementation of the optimum conditions for lipids extraction and biodiesel production was done. The algal oil average yield was 20.25 %. The extracted algal oil was chemically transesterified using ethanolic-NaOH as catalyst. The average yield of the biodiesel was 62.96 %. Fourier Transform Infrared Spectroscopy (FTIR) analysis of biodiesel showed strong intensity of –C=O ester bond. Characterizations done confirmed good suitability with conventional diesel properties and standards.

Özet

Bu özel çalışma, Spirogyra'dan biyodizelin optimum üretimi ve karakterizasyonuna odaklanmıştır. Minitab yazılımı ile parametrik optimizasyon, Merkezi Kompozit Tasarım (CCD) kullanarak deneyi tasarlamak için kullanıldı. Solvent / biyokütle oranı, ekstraksiyon sıcaklığı ve süresi için optimum değerler sırasıyla 15 ml / g, 100 oC ve 30 dakika idi. Lipit ekstraksiyonu ve biyodizel üretimi için optimum şartların dikkatli ve pratik uygulaması yapıldı. Alg yağı ortalama verimi% 20.25 idi. Çıkarılan yosun yağı, katalizör olarak etanolik-NaOH kullanılarak kimyasal olarak transesterifiye edildi. Biyodizelin ortalama verimi% 62.96 idi. Biyodizelin Fourier Dönüşümü Kızılötesi Spektroskopisi (FTIR) analizi, güçlü -C = O ester bağının yoğunluğunu göstermiştir. Yapılan karakterizasyonlar, geleneksel dizel özellikleri ve standartları ile iyi uygunluğu doğruladı.

🔖

Cite This Article

Olufemi, B. (2020). Optimum Production and Characterization of Biodiesel from Spirogyra Algae. El-Cezeri, Cilt: 7 Sayı: 3, 1529–1541. https://doi.org/10.31202/ecjse.749486

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (2)

  1. Dr. G. K. Latinwo from Ladoke Akintola University of Technology, Ogbomoso, Nigeria (field: Chemical Engineering
  2. Seyed Saeid Hosseini from School of Chemical Engineering, Tarbiat Modares University, Room 604 (field: Chemical Engineering)