SavedAdd your journal

Journals / El-Cezeri / 2021 / Cilt: 8 Sayı: 1

Effect of the Operating Temperature of Oil on Gear Teeth Surface Damages

Yağ Çalışma Sıcaklığının Dişli Yüzey Hasarları Üzerine Etkisi

İbrahim Yavuz(AFYON KOCATEPE ÜNİVERSİTESİ, TEKNOLOJİ FAKÜLTESİ)0000-0002-4480-2342
İbrahim Mutlu(AFYON KOCATEPE ÜNİVERSİTESİ, TEKNOLOJİ FAKÜLTESİ)0000-0001-5563-1000
Ahmet Çetkin(AFYON KOCATEPE ÜNİVERSİTESİ, TEKNOLOJİ FAKÜLTESİ)0000-0003-4592-5632
Bahadır İşel(Afyon Kocatepe Üniversitesi Fen Bilimleri Enstitüsü)0000-0003-2667-4823
Journal
El-Cezeri
Pages
495–503
Publication Date
2021-01-31
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

As a result, surface roughness and wear were established to increase in proportion to the rise in temperature of oil.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:This study investigates surface fatigue damages by keeping fixed the material of test gear teeth, rotation speed, lubricating oil, and the applied load, and changing the operating temperatures of oil.
📊
Key Findings & Data:In experimental studies, pre- and post-test weights of gear teeth samples were established, surface roughnesses were measured, and micrograph examinations were carried out on teeth surface.
💡
Conclusion & Impact:As a result, surface roughness and wear were established to increase in proportion to the rise in temperature of oil.
🔬Design:Araştırma Makalesi
📍Scope:Comprehensive Sample
⚙️Variables:Dişli yorulması · Yağ sıcaklığı · Yağ viskozitesi

Abstract

This study investigates surface fatigue damages by keeping fixed the material of test gear teeth, rotation speed, lubricating oil, and the applied load, and changing the operating temperatures of oil. In experimental studies, pre- and post-test weights of gear teeth samples were established, surface roughnesses were measured, and micrograph examinations were carried out on teeth surface. As a result, surface roughness and wear were established to increase in proportion to the rise in temperature of oil.

Özet

Bu çalışmada test dişlilerinin malzemesi, devir sayısı, yağlama yağı ve uygulanan yük sabit tutulmuş olup yağ çalışma sıcaklıkları değiştirilerek yüzey yorulma hasarları incelenmiştir. Deneysel çalışmalarda dişli numunelerinin deney öncesi ve sonrası ağırlıkları tespit edilmiş, yüzey pürüzlülükleri ölçülmüş, dişli yüzeylerinde mikrograf incelemeleri yapılmıştır. Sonuç olarak sıcaklığın artması ile doğru orantılı olarak yüzey pürüzlülüğünün ve aşınmanın da arttığı tespit edilmiştir.

🔖

Cite This Article

Yavuz, İ., Mutlu, İ., Çetkin, A., İşel, B., *, İ. Y. (2021). Effect of the Operating Temperature of Oil on Gear Teeth Surface Damages. El-Cezeri, Cilt: 8 Sayı: 1, 495–503. https://doi.org/10.31202/ecjse.828444

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (25)

  1. Başaran, B., “Helisel dişli çarklarda pitting oluşumunun deneysel incelenmesi”, Yüksek Lisans Tezi, Gazi Üniversitesi, Fen Bilimleri Enstitüsü, 2001, Ankara.
  2. Shen,Z., Qiao B., Yang L., Luo W., Yang Z, Chen X., “Fault mechanism and dynamic modeling of planetary gear with gear wear”, Mechanism and Machine Theory, 2021, 155,104098
  3. Flodin, S. AnderssonSimulation of mild wear in helical gears Wear, 2000, 241, 123-128
  4. Bajpai P., Kahraman A., Anderson N.E., “A surface wear prediction methodology for parallel-axis gear pairs” J. Tribol.-Trans. ASME, 2004, 126, 597-605
  5. Akbarzadeh S., Khonsari M. M., “Prediction of Steady State Adhesive Wear in Spur Gears Using the EHL Load Sharing Concept”, J. Tribol.-Trans. ASME, 2009, 131, 5
  6. Osman T., Velex P., Static and dynamic simulations of mild abrasive wear in wide-faced solid spur and helical gears”, Mech. Mach. Theory, 2010, 45, 911-924
  7. Tunalioglu M.S., Tuc B., “Theoretical and experimental investigation of wear in internal gears”, Wear, 2014, 309, pp. 208-215
  8. Masjedi M., Khonsari M. M., “On the prediction of steady-state wear rate in spur gears”, Wear, 2015, 342, 234-243
  9. Brandao J. A., Cerqueira P., Seabra J. H. O., Castro M. J. D., “Measurement of mean wear coefficient during gear tests under various operating conditions”, Tribology Int., 2016, 102, 61-69
  10. Wojnarowski J., Onishchenko V., “Tooth wear effects on spur gear”, Dynamics Mech. Mach. Theory”, 2003, 38,161-178
  11. Lundvall O., Klarbring A., “Prediction of transmission error in spur gears as a consequence of wear”, Mechanics of structures and machines, 2001, 29, 431-449
  12. Atanasiu V., Oprişan C., Leohchi D., “The effect of tooth wear on the dynamic transmission error of helical gears with smaller number of pinion teeth”, Trans Tech Publ, 2014, 649-653
  13. Choy F.K., Polyshchuk V., Zakrajsek J.J., Handschuh R.F., Townsend D.P., “Analysis of the effects of surface pitting and wear on the vibration of a gear transmission system” Tribol. Int., 1996, 29, 77-83
  14. Liu X.Z., Yang Y.H., Zhang J., “Investigation on coupling effects between surface wear and dynamics in a spur gear system” Tribol. Int., 2016, 101, 383-394
  15. Brethee K. F., Zhen D., Gu F., Ball A.D., “Helical gear wear monitoring: modelling and experimental validation”, Mech. Mach. Theory, 2017, 117, 210-229
  16. Shen Z., Qiao B., Yang L., Luo W., Chen X., “Evaluating the influence of tooth surface wear on TVMS of planetary gear set”, Mech. Mach. Theory, 2019, 136, 206-223
  17. Ding H., Kahraman A., “Interactions between nonlinear spur gear dynamics and surface wear”, J. Sound Vibr., 2007, 307, 662-679
  18. Amarnath M., Chandramohan S., Seetharaman S., “Experimental investigations of surface wear assessment of spur gear teeth”, Journal of Vibration and Control, 2012, 18, 1009-1024
  19. Wu S., Zhang H., Wang X., Peng Z., Yang K., Zhu W., “Influence of the backlash generated by tooth accumulated wear on dynamic behavior of compound planetary gear set”, Proceedings of the Institution of Mechanical Engineers Part C: Journal of Mechanical Engineering Science, 2016, 231, 2025-2041
  20. Padgornik, B., Vizintin, J., “Wear resistance of plasma and pulse plasma nitrided gears”, Gear Tecnology, 2003, 33–37
  21. Yavuz, I., Kizilaslan, K., Mutlu, I., “Effect of oil viscosity on the gear surface fatigue damages”, Journal of The Balkan Trıbologıcal Association, 2014, 20, 615-624 ‏
  22. Dempsey, P.J., Gear Damage Detection Using Oil Debris Analysis, 2001, Nasa/TM- 210936
  23. Meshari A.A., Zahrani E.A., Diab M., “Failure analysis of cooling fan gearbox”, Engineering Failure Analysis, 2012, 20, 166–172
  24. Fontanari V., Benedetti M., Straffelini G., Girardi C., Giordanino L., “Tribologıcal behaviour of the bronze-steel pair for worm gearing”, Wear, 2013, 300, 1-2, 1520-1527
  25. Hani, İ., “Madeni yağlar ve petrol ofisi ürünleri”, Petrol ofisi A.Ş. Madeni Yağ Direktörlüğü, 2002, İstanbul.