SavedAdd your journal

Journals / Erzincan Üniversitesi Fen Bilimleri Enstitüsü Dergisi / 2026 / Cilt: 17 Sayı: 2

Magnetic Properties of Borided Co-Cr-Mo Alloy

Osman İyi(SÜLEYMAN DEMİREL ÜNİVERSİTESİ)0009-0004-4138-7886
Nazım Uçar(SÜLEYMAN DEMİREL ÜNİVERSİTESİ)0000-0002-0936-0382
Adnan Çalık(ISPARTA UYGULAMALI BİLİMLER ÜNİVERSİTESİ)0000-0002-2470-5051
Pages
543–550
Publication Date
2024-08-31
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The results show that the non-magnetic Co-Cr-Mo alloy has a low magnetization with the boriding process.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:The magnetic properties of a borided Co-Cr-Mo alloy were studied in this work.
📊
Key Findings & Data:The boron process was performed by the powder pack method with Ekabor HM and Ekabor III boron sources at 1123 and 1323 K for 9 h.
💡
Conclusion & Impact:The results show that the non-magnetic Co-Cr-Mo alloy has a low magnetization with the boriding process.
🔬Design:Araştırma Makalesi
📍Scope:Comprehensive Sample
⚙️Variables:Co-Cr-Mo alloy · saturation magnetization · magnetic behavior

Abstract

The magnetic properties of a borided Co-Cr-Mo alloy were studied in this work. The boron process was performed by the powder pack method with Ekabor HM and Ekabor III boron sources at 1123 and 1323 K for 9 h. The magnetic properties were characterized with a vibrating sample magnetometer (VSM). The results show that the non-magnetic Co-Cr-Mo alloy has a low magnetization with the boriding process. In addition, the saturation magnetization (Ms) varies with the boron source and temperature.

🔖

Cite This Article

İyi, O., Uçar, N., Çalık, A. (2024). Magnetic Properties of Borided Co-Cr-Mo Alloy. Erzincan Üniversitesi Fen Bilimleri Enstitüsü Dergisi, Cilt: 17 Sayı: 2, 543–550. https://doi.org/10.18185/erzifbed.1485790

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (21)

  1. Ozturk, O., Turkan, U and Eroglu, A., (2006) Metal ion release from nitrogen ion implanted CoCrMo orthopedic implant material, Surface and Coatings Technology, 200, 5687–5697.
  2. Duan, J., Yang, Y., Zhang, E and Wang, H., (2020) Co-Cr-Mo-Cu alloys for clinical implants with osteogenic effect by increasing bone induction, formation and development in a rabbit model, Burns Trauma, 8, tkaa036.
  3. Bahçe, E., Aslan A. K., Çakır, N and Güler, M. S., (2019)., Investigation of the Surface Properties TaN Based Thin Film Coatings on the CoCrMo Alloy, The Black Sea Journal of Sciences, 9, 223-237.
  4. Cuao-Moreu, C. A., Hernández-Sanchéz, E., Alvarez-Vera, M., Garcia-Sanchez, E. O., Perez-Unzueta, A and Hernandez-Rodriguez, M. A. L., (2019) Tribological behavior of borided surface on CoCrMo cast alloy, Wear, 426–427, 204–211.
  5. Delgado-Brito, A. M., Mejía-Caballero, I., AContla-Pacheco, A. D., Pérez Pasten-Borja, R., Castrejón-Sánchez, V. H., Hernández-Ramírez, E. J and Campos-Silva, I., (2024) Bio-tribocorrosion resistance of CoB–Co2B and Co2B layers on CoCrMo alloy, Journal of Vacuum Science and Technology A 42, 023106.
  6. Tsai, C.-Y., Tseng, L.-W., Tzeng, Y.-C and Lee, P.-Y., (2022) Magnetic Properties of FeNiCoAlTiNb Shape Memory Alloys, Crystals, 12,121.
  7. Kazantseva, N. V., Davydov, D. I., Terent’ev, P. B., Shishkin, D. A., Demakov, S. L., Yurovskikh, A. S and Romanov, E. P., (2017) Mechanical and Magnetic Properties of Alloys near the Concentration Range of the Existence of Co3(Al,W) Intermetallic Compound, Physics of Metals and Metallography, 118, 432–438.
  8. Mustapić, M., Pajić, D., Novosel, N., Babić, E., Zadro, K., Cindrić, M., Horvat, J., Skoko, Z., Bijelić, M and Shcherbakov, A., (2010) Synthesis, Structural Characterization and Magnetic Properties of Iron Boride Nanoparticles with or without Silicon Dioxide Coating, Croatica Chemica Acta, 83, 275–282.
  9. Akkurt, I., Calik, A and Akyildirım, H., (2011) The boronizing effect on the radiation shielding and magnetization properties of AISI 316L austenitic stainless steel, Nuclear Engineering and Design, 241, 55-58.
  10. Ekinci, C., (2021) Investigation of magnetic and some mechanical properties of borided Fe-Ni alloys, PhD thesis, Süleyman Demirel University, Turkey.
  11. Ono, Y., (2010) Co-Cr-Mo alloy fine wire, manufacturing method therefor, and planar body, tubular body, stranded wire and cable formed of wire, NHK Spring Co., Ltd. United States Patent.
  12. Ucar, N., Gülüstan, C and Calik, A., (2021) Microstructural Characterization of Borided Co-Cr-Mo Alloy, Advences in materials Science, 21, 90-98.
  13. Khitouni, N., Hammami, B., Llorca-Isern, N., Mbarek, W. B., Suñol, J. J and Khitouni,M., (2022) Microstructure and Magnetic Properties of Nanocrystalline Fe60-xCo25Ni15Six Alloy Elaborated by High-Energy Mechanical Milling, Materials,15, 6483.
  14. Matthew, A and. Willard, M. D., (2013) Nanocrystalline Soft Magnetic Alloys Two Decades of Progress, Handbook of Magnetic Materials, 21, 173-342.
  15. Kulkarni, R., Murty, B.S and Srinivas, V., (2018) Study of microstructure and magnetic properties of AlNiCo(CuFe) high entropy alloy. Journal of Alloys and Compounds, 746, 194–199.
  16. Kartal, L., (2023) Cobalt Boride (Co2 B) Particle Synthesis by One-step Carbothermic Reduction, Hittite Journal of Science and Engineering, 10, 229–235.
  17. Ortiz-Domínguez, M., Flores-Rentería, M. A., Keddam, M., Elias-Espinosa, M., Damián-Mejía, O., Aldana-González, J. I., Zuno-Silva, J., Medina-Moreno, S. A and González-Reyes, J. G., (2014) Simulatıon of growth kınetıcs of fe2b layers formed on gray cast ıron durıng the powder-pack borıdıng, Materiali in tehnologije/Materials and technology 48, 905–916.
  18. Dzyadykevich, Y. V and Zablotskaya, N. I., (1992) Influence of Copper on the Phase Formation Process in Borosilicide Layers on Niobium and Tantalum, Soviet Powder metallurgy andmetal Ceramics, 31,129-133.
  19. Fojtikova, Z. P. J., Koubsky, T., Musalek, R., Strasky, J., Capek, J., Kyncl, J., Beranek, L and Kolarik, K., (2015) Study of residual stresses, microstructure, and hardness in FeB and Fe2B ultra-hard layers, Powder Diffraction, 30, 83-89.
  20. Luo, H., Meng, F., Jiang, Q., Liu, H., Liu, E., Wu, G and Wang, Y., (2010) Effect of boron on the martensitic transformation and magnetic properties of Ni50Mn36.5Sb13.5_xBx alloys, Scripta Materialia, 63, 569–572.
  21. Matthew, A and. Willard, M. D., (2013) Nanocrystalline Soft Magnetic Alloys Two Decades of Progress, Handbook of Magnetic Materials, 21, 173-342.