SavedAdd your journal

Journals / Politeknik Dergisi / 2020 / Cilt: 23 - Sayı: 1

Energy and Exergy Analysis of a Kalina Cycle Used for Combined Heat-Power Systems

Isı-Güç Kombine Sistemlerinde Kullanılan Kalina Çevriminin Enerji ve Ekserji Analizi

Yıldız KOÇ
Hüseyin YAĞLI
Pages
181–188
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

As a result of the study, maximum exergy destruction was observed in evaporator, while energy efficiency and exergy efficiency of Kalina cycle were calculated as 12% and 27%, respectively.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Nowadays, when global warming is increasing and air pollution threatens human health in a sensible way, the need for energy is increasing.
📊
Key Findings & Data:To meet the energy needs, researchers are working on different power generation systems or trying to increase the capacity of existing plants.
💡
Conclusion & Impact:As a result of the study, maximum exergy destruction was observed in evaporator, while energy efficiency and exergy efficiency of Kalina cycle were calculated as 12% and 27%, respectively.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Kalina çevrimi · ısı-güç kombine sistemi · enerji

Abstract

Nowadays, when global warming is increasing and air pollution threatens human health in a sensible way, the need for energy is increasing. Therefore, it is aimed not only to meet the people's energy needs but also to minimize the factors that threaten the environment. To meet the energy needs, researchers are working on different power generation systems or trying to increase the capacity of existing plants. However, industrial waste heat and flue gases, one of the most important reasons of global warming and air pollution, are released to the atmosphere and cause a great waste of energy. Therefore, the improvement of the facilities in use and the recovery of waste heat are of vital importance. In this study, the Kalina cycle, which is a new method for recovering the waste heat has been designed for a medium temperature waste heat source released from a combined heat-power system. Afterwards, the thermodynamic analysis of the designed Kalina cycle was carried out in terms of the first and second law of the thermodynamics. As a result of the study, maximum exergy destruction was observed in evaporator, while energy efficiency and exergy efficiency of Kalina cycle were calculated as 12% and 27%, respectively.

Özet

Küresel ısınmanın giderek arttığı ve hava kirliliğinin insan sağlığını hissedilebilir şekilde tehdit ettiği bugünlerde, enerjiye olan ihtiyaç da giderek artmaktadır. Bu nedenle sadece insanların enerji ihtiyacını karşılamak değil bunun yanında çevreyi tehdit eden unsurların da minimum seviyelere indirilmesi hedeflenmektedir. Enerji ihtiyacını karşılamak için araştırmacılar farklı enerji üretim sistemleri üzerinde çalışmalar yapmakta ya da var olan tesislerin kapasitesini arttırmaktadır. Ancak, küresel ısınma ve hava kirliliğinin en önemli sebeplerinden biri olan endüstriyel atık ısı ve baca gazları atmosfere bırakılarak büyük bir enerji israfına sebep olmaktadır. Bu nedenle, kullanılmakta olan tesislerin iyileştirilmesi ve atık ısıların geri kazanımı hayati derecede önem arz etmektedir. Bu çalışmada kombine ısı-güç çevrimindeki orta derece sıcaklıktaki atık ısının geri dönüşümünü sağlamak için yeni bir metot olan Kalina çevrimi tasarlanmıştır. Sonrasında tasarlanmış olan Kalina çevriminin birinci ve ikinci kanun yönünden termodinamik analizi yapılmıştır. Çalışma sonucunda, maksimum ekserji yıkımı buharlaştırıcıda görülürken, Kalina çevriminin enerji verimi ve ekserji verimi sırasıyla yaklaşık %12 ve %27 olarak hesaplanmıştır.

🔖

Cite This Article

KOÇ, Y., YAĞLI, H. (2020). Energy and Exergy Analysis of a Kalina Cycle Used for Combined Heat-Power Systems. Politeknik Dergisi, Cilt: 23 - Sayı: 1, 181–188. https://ajindex.com/articles/118736

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (13)

  1. Bose, B. K. (2010). Global warming: Energy, environmental pollution, and the impact of power electronics. IEEE Industrial Electronics Magazine, 4(1), 6-17.
  2. Mansoury, M., Jafarmadar, S. ve Khalilarya, S. (2018). Energy and exergy analyses of a combined cycle Kalina and organic Rankine cycles using waste heat. International Journal of Exergy, 27(2), 251-286.
  3. Zhang, X., He, M., ve Zhang, Y. (2012). A review of research on the Kalina cycle. Renewable and sustainable energy reviews, 16(7), 5309-5318.
  4. Ogriseck, S. (2009). Integration of Kalina cycle in a combined heat and power plant, a case study. Applied Thermal Engineering, 29(14-15), 2843-2848.
  5. Zare, V. ve Mahmoudi, S. M. S. (2015). A thermodynamic comparison between organic Rankine and Kalina cycles for waste heat recovery from the Gas Turbine-Modular Helium Reactor. Energy, 79, 398-406.
  6. Ibrahim, M. B. ve Kovach, R. M. (1993). A Kalina cycle application for power generation. Energy, 18(9), 961-969.
  7. Ganesh, N. S. ve Srinivas, T. (2019). Nuclear energy-driven Kalina cycle system suitable for Indian climatic conditions. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 41(3), 298-308. Rodríguez, C. E. C., Palacio, J. C. E., Venturini, O. J., Lora, E. E. S., Cobas, V. M., dos Santos, D. M. ve Gialluca, V. (2013). Exergetic and economic comparison of ORC and Kalina cycle for low temperature enhanced geothermal system in Brazil. Applied Thermal Engineering, 52(1), 109-119.
  8. Bombarda, P., Invernizzi, C. M. ve Pietra, C. (2010). Heat recovery from Diesel engines: A thermodynamic comparison between Kalina and ORC cycles. Applied thermal engineering, 30(2-3), 212-219.
  9. Nemati, A., Nami, H., Ranjbar, F. ve Yari, M. (2017). A comparative thermodynamic analysis of ORC and Kalina cycles for waste heat recovery: a case study for CGAM cogeneration system. Case Studies in Thermal Engineering, 9, 1-13.
  10. Mirolli, M. D. (2005). The Kalina cycle for cement kiln waste heat recovery power plants. In Conference Record Cement Industry Technical Conference, 2005. (pp. 330-336).
  11. IEEE. Mirolli, M. D. (2007). Ammonia-water based thermal conversion technology: Applications in waste heat recovery for the cement industry. In 2007 IEEE Cement Industry Technical Conference Record (pp. 234-241).
  12. IEEE. Kalina, A. I. (1984). Combined-cycle system with novel bottoming cycle. Journal of engineering for gas turbines and power, 106(4), 737-742.
  13. Usvika, R., Rifaldi, M. ve Noor, A. (2009). Energy and exergy analysis of kalina cy