Journals / Dental and Medical Journal - Review / 2023 / Cilt: 5 Sayı: 3 - Dental and Medical Journal - Review

ZIRCONIA SUBSTRUCTURE RESTORATION INTRAORAL REPAIR METHODS: A REVIEW

ZİRKONYA ALT YAPILI RESTORASYONLARIN AĞIZ İÇİ TAMİR YÖNTEMLERİ: DERLEME

Pages
11–21
Publication Date
2023-10-31
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The purpose of the article is to compile the conditions can cause chipping, as well as current intraoral repair protocols and guidelines, to assist clinicians decide the best treatment option by determining whether a ceramic chipping is a failure that requires prosthesis replacement, the dimensions of the fracture surface, and whether it is located in an area that contributes to occlusion.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Veneering ceramic chipping is frequently reported in the literature.
📊
Key Findings & Data:Intraoral repair is an ideal solution when a chipped veneering ceramic restoration cannot be removed and replaced.
💡
Conclusion & Impact:The purpose of the article is to compile the conditions can cause chipping, as well as current intraoral repair protocols and guidelines, to assist clinicians decide the best treatment option by determining whether a ceramic chipping is a failure that requires prosthesis replacement, the dimensions of the fracture surface, and whether it is located in an area that contributes to occlusion.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Ağız içi tamir · Chipping · Zirkonya

Abstract

Veneering ceramic chipping is frequently reported in the literature. Intraoral repair is an ideal solution when a chipped veneering ceramic restoration cannot be removed and replaced. The purpose of the article is to compile the conditions can cause chipping, as well as current intraoral repair protocols and guidelines, to assist clinicians decide the best treatment option by determining whether a ceramic chipping is a failure that requires prosthesis replacement, the dimensions of the fracture surface, and whether it is located in an area that contributes to occlusion.

Özet

Üst yapı seramiğinde chipping kırıkları literatürde sıklıkla bildirilmektedir. Bu kırıkların ağız içi tamiri, restorasyonların çıkarılamadığı ya da değiştirilemediği durumlarda klinisyene tedavi alternatifi sunmaktadır. Bu makalenin amacı, chipping kırıklarını etkileyen faktörleri, ağız içi tamir için mevcut protokolleri ve kılavuzları derleyerek klinisyenin, seramik kırılmasının protezin değiştirilmesini gerektiren bir başarısızlık oluşturup oluşturmadığını, kırık yüzeyinin boyutlarını ve okluzyona katkıda bulunan bir alanda yer alıp almadığını değerlendirerek uygun tedavi alternatifini belirlemesine yardımcı olmaktır.

🔖

Cite This Article

ÖZİŞÇİ, Ö. (2023). ZIRCONIA SUBSTRUCTURE RESTORATION INTRAORAL REPAIR METHODS: A REVIEW. Dental and Medical Journal - Review, Cilt: 5 Sayı: 3 - Dental and Medical Journal - Review, 11–21. https://ajindex.com/articles/1018368

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (15)

  1. Miyazaki T, Nakamura T, Matsumura H, et al. Current status of zirconia restoration. J Prosthodont Res. 2013;57(4):236–261
  2. Agustin-Panadero R, Roman-Rodriguez JL, Ferreiroa A, et al. Zirconia in fixed prosthesis. A literature review. J Clin Exp Dent. 2014;6(1):e66-e73
  3. Guazzato M, Albakry M, Ringer SP, Swain MV. Strength, fracture toughness and microstructure of a selection of all-ceramic materials. Part II. Zirconiabased dental ceramics. Dent Mater. 2004;20(5):449-56
  4. Luo XP, Zhang L. Effect of veneering techniques on color and translucency of Y-TZP. J Prosthodont 2010;19(6):465-70
  5. Passos SP, Linke B, Major PW, Nychka JA. Improving the compatibility of an Y-TZP/porcelain system using a new composite interlayer composition. J Mech Behav Biomed Mater.2017;65:11-19
  6. Kontonasaki E, Rigos AE, Ilia C, Istantsos T. Monolithic zirconia: an update to current knowledge. Optical properties, wear, and clinical performance. Dent J.2019;7(3):90
  7. Flask JD, Thompson GA, Singh M, Berzins DW. Edge chipping of translucent zirconia. J. Prosthet. Dent.2021. Article in press
  8. Shilpa P, Narendra R, Sesha Reddy SR. Shear Bond Strength of Ceramic Bonded to Different Core Materials and Their Pattern of Failure: An In Vitro Study. Cureus 2019;11:e6242
  9. Kosmac T, Oblak C, Jevnikar P, Funduk N, Marion L. The effect of surface grinding and sandblasting on flexural strength and reliability of Y-TZP zirconia ceramic. Dent Mater. 1999;15(6):426–433
  10. Guess PC, Kulis A, Witkowski S, et al. Shear bond strengths between different zirconia cores and veneering ceramics and their susceptibility to thermocycling. Dent Mater. 2008;24(11):1556–1567
  11. Kumchai H, Juntavee P, Sun AF, Nathanson D. Effects of Veneering Ceramic and Methods on Failure Load of Veneered Zirconia. Appl. Sci. 2021;11(5):2129
  12. Ural Ç, Külünk T, Külünk Ş, Kurt M, Baba S. Determination of resin bond strength to zirconia ceramic surface using different primers. Acta Odontol Scand.2011;69:48-53
  13. Chaiyabutr Y, McGowan S, Phillips KM, Kois JC, Giordano RA. The effect of hydrofluoric acid surface treatment and bond strength of a zirconia veneering ceramic. J Prosthet Dent.2008;100:194-202
  14. Thompson JY, Stoner BR, Piascik JR, Smith R. Adhesion/cementation to zirconia and other non-silicate ceramics: where are we now? Dent Mater.2011;27:71-82
  15. Kim BK, Bae HE, Shim JS, Lee KW. The influence of ce- ramic surface treatments on the tensile bond strength of composite resin to all ceramic c