Dergiler / Bitlis Eren Üniversitesi Fen Bilimleri Dergisi / 2018 / Cilt: 7 - Sayı: 2

Yeni Aşırı Genişleşmeli Altı Zamanlı Motor Mekanizması

Novel Over-Expanded Six-Stroke Engine Mechanism

Sayfa
320–338
DOI
—

Özet

Dört zamanlı motorların egzoz atık ısısının bir kısmı, çeşitli şekillerde faydalı işlere dönüştürülebilir. Altı zamanlı motor mekanizmalarının egzoz ısısı geri kazanımı ile amaç, motor için faydalı işlerin atık ısısını dönüştürerek ısıl verimliliği arttırmaktır. Bugün altı zamanlı motorlarla ilgili birçok patentin varlığına rağmen, endüstride daha fazla çalışma ve araştırma yapılması gerekmektedir. Bu çalışmada, geleneksel altı zamanlı bir motor yerine, değişken stroklu altı zamanlı bir motor mekanizması teorik olarak incelenmiştir. Yeni mekanizmanın idealize edilmiş bir termodinamik modeli oluşturuldu, kinetik ve dinamik analizler yapıldı ve tasarım parametreleri geleneksel motor mekanizmasına göre incelendi. Sonuç olarak, bu çalışma ile aynı koşullar altında geleneksel altı zamanlı motor mekanizmasına kıyasla, motor momenti %10 artarken, krank milindeki yük yalnızca %1 artmıştır

Abstract

Some of the exhaust waste heat of the four-stroke engines can be transformed into useful work in a variety of ways.With the exhaust heat recovery from the six-stroke engine mechanisms, the goal is to increase the thermalefficiency by converting the waste heat of useful work for the engine. Despite the availability of many patentsrelated to six-stroke engines today more study and research are required to be used industrially. In this study,instead of a conventional six-stroke engine, a variable-stroke six-stroke engine mechanism was theoreticallyexamined. An idealized thermodynamic model of the novel mechanism was constructed, kinetic and dynamicanalyzes were made, and the design parameters were examined in comparison with the conventional enginemechanism. As a result, compared to the conventional six-stroke engine mechanism under the same conditions asthis study, while the engine moment was increased by 10% , whereas the load on the crankshaft increased by only1%.