Dergiler / Fırat Üniversitesi Mühendislik Bilimleri Dergisi / 2017 / Cilt: 29 - Sayı: 1
Asmolen Döşeme Sistemlerinde Kolon-Kiriş Birleşim Bölgelerinin Davranışı Hususunda Genel Bir Değerlendirilme
- Sayfa
- 121–132
- DOI
- —
Özet
Arası taşıyıcı özelliği olmayan malzemeler ile doldurulmuş dişlerden (nervür) ve bu dişleri birbirine bağlayan ince bir plaktan oluşan döşeme sistemi, asmolen döşeme olarak adlandırılır. Bu çalışmada, asmolen döşeme sistemlerinin özel bir yapı sistemi olduğu algısının oluşturulması, tasarımcıların dikkat etmeleri gereken hususların netleştirilmesi ve araştırmacıların bu konuya yönelmelerinin sağlanması amaçlanmıştır. Bu döşeme sisteminin kullanımı, tasarımcıya ve kullanıcıya sağladığı avantajlardan dolayı gittikçe yaygınlaşmaktadır. Asmolen döşeme genellikle, geniş ve yüksekliği düşük kirişlerden oluşmaktadır. Bu nedenle, deprem yükleri altındaki performanslarının dikkatle incelenmesi gerekir. Tasarıma gereken hassasiyetin gösterilmemesi, olası depremlerde asmolen döşemeli binaların beklenen performansı gösterememesine sebep olacaktır. Binaların deprem yükleri altındaki davranışında, kolon-kiriş birleşim bölgesinin performansı kilit rol üstlenmektedir. Bu nedenle bu çalışmada asmolen döşemenin deprem yükleri altındaki davranışı, kolon-kiriş birleşim bölgesi esas alınarak incelenmiştir. Sonuç olarak, literatürde kolon-geniş kiriş birleşim bölgesi üzerinde yapılan deneysel çalışmaların sonuçları irdelenmiş ve tasarımcılara yol gösterecek ayrıntılı değerlendirme sunulmuştur.
Abstract
The slab system designed by ribs whose hollow filled with nonstructural materials such as styro-foam and a thin reinforced concrete plate which connected to the ribs each other, called hollow block slabs. In the current study, firstly, creating the perception that the hollow block slabs are important system, secondly, clarifying of the issues that design engineers should be careful, lastly, enabling that the researchers should pay attention to this issue are aimed. These slab systems are increasingly used because of the advantages to the design engineers. A significant part of the hollow slabs are design with the beams which are the large and the low height. Therefore, the performance of hollow block slabs must be carefully investigated under the dynamic loads. Unless the necessary sensitivity are not showed the designing of the hollow block slabs, when the potential earthquake occurs, buildings, which have the hollow block slabs will not have the good performance. When the performances of the buildings are considered, the performance of column-beam joints assumes a key role. So, in this study, the dynamic behaviors of the hollow block slabs were investigated based on column-beam joints. Consequently, the results of experimental studies were evaluated on wide column-beam joints of the literature and presented detailed assessments to guide designers.