Dergiler / Turkish Journal of Electrical Engineering and Computer Science / 2012 / Cilt: 20 - Sayı: 1
Tunable SRR-based substrate for a microstrip patch antenna
- Sayfa
- 159–168
- DOI
- —
Özet
In this paper, a microstrip patch antenna over an artificial substrate composed of split-ring resonator (SRR) elements is introduced. As the SRR-based substrate provides miniaturization for the patch, metallic loadings placed between the rings of the SRR elements offer frequency-tuning capability. Practical switch models are employed in lieu of those loadings to demonstrate dynamic control of the operational frequency. The full-wave analysis and design of the proposed tunable patch were carried out using CST Microwave Studio, and the cross-comparisons were provided via Ansoft HFSS. Preliminary measurements are also presented, demonstrating the prospective performance of the proposed design.
Abstract
In this paper, a microstrip patch antenna over an artificial substrate composed of split-ring resonator (SRR) elements is introduced. As the SRR-based substrate provides miniaturization for the patch, metallic loadings placed between the rings of the SRR elements offer frequency-tuning capability. Practical switch models are employed in lieu of those loadings to demonstrate dynamic control of the operational frequency. The full-wave analysis and design of the proposed tunable patch were carried out using CST Microwave Studio, and the cross-comparisons were provided via Ansoft HFSS. Preliminary measurements are also presented, demonstrating the prospective performance of the proposed design.