Dergiler / Forestist / 2018 / Cilt: 68 Sayı: 1

Dişbudak (Fraxinus angustifolia Vahl.) odununun boyutsal stabilizasyonu üzerine ısıl işlemin etkisi

Effect of heat treatment on the dimensional stability of ash (Fraxinus angustifolia Vahl.) wood

Sayfa
42–52
Yayın Tarihi
2018-01-01
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

Genel olarak ısıl işlem sıcaklık ve süresinin artışı ile SAO’larında azalmalar meydana gelir iken, SİE ve GET değerlerinde artışlar tespit edilmiştir.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:Dişbudak (Fraxinus angustifolia Vahl.) odununun boyutsal stabilizasyonu üzerine ısıl işlemin etkisiÖzet: Bu çalışmada, Türkiye’de doğal olarak yetişen dişbudak (Fraxinus angustifolia Vahl.) odununun boyutsal stabilizasyonu üzerine ısıl işlemin etkisi araştırılmıştır.
📊
Temel Bulgular & Veri:Dişbudak örneklerine su buharı ortamında, farklı sıcaklık (120, 160, 190 ve 210 °C) ve sürelerde (3, 6 ve 9 saat) ısıl işlem uygulanmıştır.
💡
Sonuç & Katkı:Genel olarak ısıl işlem sıcaklık ve süresinin artışı ile SAO’larında azalmalar meydana gelir iken, SİE ve GET değerlerinde artışlar tespit edilmiştir.
🔬Tür:Araştırma Makalesi
📍Kapsam:2016 Verileri
⚙️Değişkenler:Dişbudak odunu (Fraxinus angustifolia Vahl.) · boyutsal stabilizasyon · ATR-FTIR

Özet

Dişbudak (Fraxinus angustifolia Vahl.) odununun boyutsal stabilizasyonu üzerine ısıl işlemin etkisiÖzet: Bu çalışmada, Türkiye’de doğal olarak yetişen dişbudak (Fraxinus angustifolia Vahl.) odununun boyutsal stabilizasyonu üzerine ısıl işlemin etkisi araştırılmıştır. Dişbudak örneklerine su buharı ortamında, farklı sıcaklık (120, 160, 190 ve 210 °C) ve sürelerde (3, 6 ve 9 saat) ısıl işlem uygulanmıştır. Deney örnekleri üzerinde, su alma oranı (SAO), su itici etkinlik (SİE), genişlemeyi önleyici etkinlik (GET) ve ATR-FTIR analizleri gerçekleştirilmiştir. Genel olarak ısıl işlem sıcaklık ve süresinin artışı ile SAO’larında azalmalar meydana gelir iken, SİE ve GET değerlerinde artışlar tespit edilmiştir. Isıl işlem sıcaklığının artışına bağlı olarak, -OH gerilme titreşimine ait piklerin absorbans değerlerinde azalmalar tespit edilmiştir. Özellikle 190 °C’de 3 saatlik uygulamada GET değerleri hızlı bir artış ile %40’ın üzerine çıkmıştır. Dişbudak odununun en yüksek boyutsal stabilite değerleri (%58.4), en yüksek ısıl işlem sıcaklık ve süresinde (210 °C ve 9 saat) elde edilmiştir. Sonuç olarak, ısıl işlem uygulaması ile dişbudaktan üretilen masif odun ürünlerinin kalite ve değerlerinin zehirleyici kimyasallar kullanılmadan artırılabileceği görülmüştür.Received (Geliş): 13.05.2016 - Revised (Düzeltme): 06.06.2016 - Accepted (Kabul): 10.06.2016

Abstract

The effect of heat treatment on the dimensional stability of ash (Fraxinus angustifolia Vahl.) woodAbstract: In this study, effect of heat treatment on dimensional stability of ash (Fraxinus angustifolia Vahl.) woods that naturally grown in Turkey, was investigated. Heat treatment process was applied to ash wood samples at different temperatures (120, 160, 190 and 210 °C) and times (3, 6 and 9 h) in water vapor atmosphere. Water absorption (WA), water repellent effectiveness (WRE), anti-swell effectiveness (ASE, TS 4084) and ATR-FTIR were performed on the test samples. Generally, while the WA decreased with the raise of treatment temperature and times, mean of the WRE and ASE increased. It was determined that the decreases in the absorbance value of the peak belong to the -OH stretching vibration depending on the heat treatment temperature increases. Especially, ASE increased to over 40% with a rapid increase after the three hours application at 190 °C. The highest dimensional stability (58.4%) of ash wood was detected in the highest heat treatment temperature and times (210 °C and 9 h). As a result, it was showed that value and product quality of solid products produced from ash wood with the heat treatment can be improved without use of toxic chemicals.Received (Geliş): 13.05.2016 - Revised (Düzeltme): 06.06.2016 - Accepted (Kabul): 10.06.2016

🔖

Bu Makaleye Atıf Yap

ŞAHİN, H. İ., GÜLER, C. (2018). Dişbudak (Fraxinus angustifolia Vahl.) odununun boyutsal stabilizasyonu üzerine ısıl işlemin etkisi. Forestist, Cilt: 68 Sayı: 1, 42–52. https://ajindex.com/articles/990309

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (9)

  1. Anonim, 2003. Adapazarı meteoroloji istasyonu iklim verileri. Meteoroloji İşleri Genel Müdürlüğü Arşivi, Ankara.
  2. Akkılıç, H., Kaymakcı, A., Ünsal, Ö., 2014. Isıl işlem uygulanmış ahşap malzemenin dış cephe kaplaması olarak değerlendirilme potansiyeli. 7. Ulusal Çatı & Cephe Sempozyumu, 3-4 Nisan 2014,
  3. Yıldız Teknik Üniversitesi Beşiktaş, İstanbul, pp. 239-248.
  4. As, N., Dündar, T., Büyüksarı, Ü., 2016. Classification of wood species grown in Turkey according to some physico-mechanic properties. Journal of the Faculty of Forestry Istanbul University 66(2): 727-735, doi: 10.17099/jffiu.93670. Aydemir, D., Gunduz, G., Altuntaş, E., Ertas, M., Şahin, H.T., Alma, M.H., 2011. Investigating changes in the chemical consitutents and dimensional stability of heat-treated hornbeam and uludag fir wood. BioResources 6(2): 1308-1321.
  5. Bekhta, P., Niemz, P., 2003. Effect of high temperature on the change in color, dimensional stability and mechanical properties of spruce wood. Holzforschung 57(5): 539-546, doi: 10.1515/HF.2003.080. Boonstra, M., 2008. A two-stage thermal modification of wood. Ph.D. Thesis, Soil and Forest management, Henry Poincaré University, Nancy-France. Cademartori, P.H.G., Missio, A.L., Mattos, B.D., Schneid, E., Gatto, D.A., 2014. Physical and mechanical properties and colour changes of fast-growing Gympie messmate wood subjected to two-step steam-heat treatments. Wood Material Science and Engineering 9(1): 40-48, doi: 10.1080/17480272.2013.853692. Calonego, F.W., Severo, E.T.D., Ballarin, A.W., 2012. Physical and mechanical properties of thermally modified wood from E. grandis. Holz als Roh- und Werkstoff 70(4): 453- 460, doi: 10.1007/s00107-011-0568-5.
  6. Cao, Y., Lu, J., Huang R., 2012. Increased dimensional stability of Chinese fir through steam-heat treatment. European Journal of Wood and Wood Products 70: 441-444, doi: 10.1007/s00107-011-0570-y. Çiçek, E., Yılmaz, M., 2002. The importance of Fraxinus angustifolia subsp. oxycarpa as a fast growing tree for Turkey. In Proceedings, IUFRO Meeting, Management of Fast Growing Plantations, 11-13 September 2002,
  7. İzmit, Turkey, pp. 192-200.
  8. Dündar, T., Büyüksarı, Ü., Avcı, E., Akkılıç, H., 2012. Effect of heat treament on the physical and mechanical properties of compression and opposite wood of Black Pine. BioResources 7(4): 5009-5018.
  9. Edvardsen, K., Sandland, K.M., 1999.Increased drying temprature its influence on the dimensional stabilty of wood. Holz als Roh-und Werkstoff 57: 207-209, doi: 10.1007/s0010