It was seen that the molecular weight distributions (PDI) of the synthesized copolymers showed a narrow distribution between 3-5.
📌 3 Maddede Bu Makale
🎯
Amaç & Hipotez:Semi-continuous free radical emulsion polymerizations of vinyl acetate and butyl acrylate initiated by a water-soluble (potassium peroxydisulfate, KPS) initiator in the presence of a N-methylol acrylamide (NMA) at 70°C were investigated. 12 different monomer compositions (BuA ratio, from 0/100 to 100/0) were prepared and the effect of Vinyl acetate /Butyl acrylate (Vac/BuA) monomer ratio on viscosity, molecular weights (Mn, Mw, Mv), conversion, and molecular weight distribution were also investigated.
📊
Temel Bulgular & Veri:Viscosity and molecular weights were increased with BuA ratio in the synthesized copolymers.
💡
Sonuç & Katkı:It was seen that the molecular weight distributions (PDI) of the synthesized copolymers showed a narrow distribution between 3-5.
Semi-continuous free radical emulsion polymerizations of vinyl acetate and butyl acrylate initiated by a water-soluble (potassium peroxydisulfate, KPS) initiator in the presence of a N-methylol acrylamide (NMA) at 70°C were investigated. 12 different monomer compositions (BuA ratio, from 0/100 to 100/0) were prepared and the effect of Vinyl acetate /Butyl acrylate (Vac/BuA) monomer ratio on viscosity, molecular weights (Mn, Mw, Mv), conversion, and molecular weight distribution were also investigated. It was found that as a protective colloid, N-methylol acrylamide worked perfectly for maintaining emulsion stability. Viscosity and molecular weights were increased with BuA ratio in the synthesized copolymers. High conversion values (above 90%) were reached. It was seen that the molecular weight distributions (PDI) of the synthesized copolymers showed a narrow distribution between 3-5.
Muench S et al. (2021) Emulsion Polymerizations for a Sustainable Preparation of Efficient TEMPO-based Electrodes. Chem Sus Chem. 14(1):449-455. https://doi.org/10.1002/cssc.202002251
Kahraman A, Sarac A (2007) A Study on the Vinyl Acetate-co-Butyl Acrylate Latexes in the Presence of N-Methylol Acrylamide and Mixed Type Emulsifiers. Macromol Symp. 254(1):136-140. https://doi.org/10.1002/masy.200790051
Eliseeva VI, Ivanchev SS, Kuchanov SI, Lebedev A (2012) Emulsion polymerization and its applications in industry. Springer, New York, NY. Erbil YH (2000). Vinyl acetate emulsion polymerization and copolymerization with acrylic monomers. CRC Press,
Boca Raton, Florida, USA. Zheng J, Xie GH, Hu X, Peng HA (2014) Emulsion polymerization of methyl methacrylate and butyl acrylate using non-ionic polyurethane as emulsifier. Advanced Materials Research 842:70-73 https://doi.org/10.4028/www.scientific.net/AMR.842.70
Sajjadi S, Yianneskis M (2003) Semibatch emulsion polymerization of methyl methacrylate with a neat monomer feed. Polymer Reaction Engineering. 11(4):715-736. https://doi.org/10.1081/PRE-120026371
Karagöz İ, Tuna Ö (2021) Effect of melt temperature on product properties of injection-molded high-density polyethylene. Polymer Bulletin 78:6073-6091. https://doi.org/10.1007/s00289-021-03695-w
Sjöblom J (2005) Emulsions and emulsion stability. Second edition. CRC Press,
Boca Raton, Florida, USA. Lovell PA, Schork FJ (2020) Fundamentals of Emulsion Polymerization. Biomacromolecules, 21(11):4396-4441. https://doi.org/10.1021/acs.biomac.0c00769
El-Aasser MS (2012) Emulsion polymerization of vinyl acetate. Springer, New York, NY. Plessis C, Arzamendi G, Leiza JR, Schoonbrood HAS, Charmot D, Asua JM (2000) Seeded semibatch emulsion polymerization of n-butyl acrylate: Kinetics and structural properties. Macromolecules 33(14):5041-5047. https://doi.org/10.1021/ma992053a
Mondal S, Gupta B, Singh H (2005) Acrylic monomers based emulsion copolymer for coating application. Indian J Fibre Text Res. 30:184-189.
Abad C, Jose C, Cal DL, Asua JM (1994) Emulsion copolymerization in continuous loop reactors. Xhemical Engineering Science 49(24):5025–5037. https://doi.org/10.1016/0009