KaydedilenlerDerginizi ekleyin

Dergiler / Eurasian Journal of Science Engineering and Technology / 2023 / Cilt: 4 Sayı: 1

INVESTIGATION OF STRUCTURAL, OPTICAL, AND ELECTRICAL PROPERTIES OF ITO FILMS DEPOSITED AT DIFFERENT PLASMA POWERS: ENHANCED PERFORMANCE AND EFFICIENCY IN SHJ SOLAR CELLS

Emre KARTAL
İlker DURAN
Elif DAMGACI
Ayşe SEYHAN
Sayfa
25–35
Yayın Tarihi
2023-06-15
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

Finally, we report a noteworthy efficiency of 17.03% achieved in the SHJ solar cell fabricated with the ITO film deposited at 2050 W on a 5x5 cm2 n-type Si substrate.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:This article presents an investigation into the structural, optical, and electrical properties of Indium Tin Oxide (ITO) films that were deposited utilizing various plasma powers.
📊
Temel Bulgular & Veri:The transmittance values in the visible region were measured, revealing that the ITO film deposited at 2050 W exhibited the highest transmittance (81%).
💡
Sonuç & Katkı:Finally, we report a noteworthy efficiency of 17.03% achieved in the SHJ solar cell fabricated with the ITO film deposited at 2050 W on a 5x5 cm2 n-type Si substrate.
🔬Tür:Araştırma Makalesi
📍Kapsam:2050 Verileri
⚙️Değişkenler:Transparent conductive oxide (TCO) · Indium Tin Oxide (ITO) · DC magnetron sputtering

Abstract

This article presents an investigation into the structural, optical, and electrical properties of Indium Tin Oxide (ITO) films that were deposited utilizing various plasma powers. The transmittance values in the visible region were measured, revealing that the ITO film deposited at 2050 W exhibited the highest transmittance (81%). Additionally, the sheet resistance values of all films were analyzed, indicating that the ITO film deposited at 2050 W had the lowest sheet resistance (64.9 Ω/sq). By means of XRD analysis, the structural properties of the films were meticulously scrutinized, and the distinctive diffraction peaks associated with the ITO films were successfully identified. Notably, the ITO film deposited at 2050 W demonstrated superior performance compared to the other films deposited using various plasma powers. Finally, we report a noteworthy efficiency of 17.03% achieved in the SHJ solar cell fabricated with the ITO film deposited at 2050 W on a 5x5 cm2 n-type Si substrate.

🔖

Bu Makaleye Atıf Yap

KARTAL, E., DURAN, İ., DAMGACI, E., SEYHAN, A. (2023). INVESTIGATION OF STRUCTURAL, OPTICAL, AND ELECTRICAL PROPERTIES OF ITO FILMS DEPOSITED AT DIFFERENT PLASMA POWERS: ENHANCED PERFORMANCE AND EFFICIENCY IN SHJ SOLAR CELLS. Eurasian Journal of Science Engineering and Technology, Cilt: 4 Sayı: 1, 25–35. https://ajindex.com/articles/946012

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (6)

  1. C. Battaglia, A. Cuevas, and S. de Wolf, “High-efficiency crystalline silicon solar cells: status and perspectives,” Energy Environ Sci, vol. 9, no. 5, pp. 1552–1576, 2016, doi: 10.1039/C5EE03380B. S. Q. Hussain et al., “Highly transparent RF magnetron-sputtered indium tin oxide films for a-Si:H/c-Si heterojunction solar cells amorphous/crystalline silicon,” Mater Sci Semicond Process, vol. 24, pp. 225–230, 2014, doi: https://doi.org/10.1016/j.mssp.2014.02.044. M. Taguchi, “Review—Development History of High Efficiency Silicon Heterojunction Solar Cell: From Discovery to Practical Use,” ECS Journal of Solid State Science and Technology, vol. 10, no. 2, p. 025002, 2021, doi: 10.1149/2162-8777/abdfb6. M. A. Green, E. D. Dunlop, J. Hohl-Ebinger, M. Yoshita, N. Kopidakis, and A. W. Y. Ho-Baillie, “Solar cell efficiency tables (Version 55),” Progress in Photovoltaics: Research and Applications, vol. 28, no. 1, pp. 3–15, Jan. 2020, doi: https://doi.org/10.1002/pip.3228.
  2. S. de Wolf, A. Descoeudres, Z. C. Holman, and C. Ballif, “High-efficiency Silicon Heterojunction Solar Cells: A Review,” Green, vol. 2, no. 1, pp. 7–24, 2012, doi: doi:10.1515/green-2011-0018.
  3. V. Singh, C. K. Suman, and S. Kumar, “Indium Tin Oxide (ITO) films on flexible substrates for organic light emitting diodes,” in Proc. of ASID, 2006, p. 388. B. Walker, A. K. Pradhan, and B. Xiao, “Low temperature fabrication of high performance ZnO thin film transistors with high-k dielectrics,” Solid State Electron, vol. 111, pp. 58–61, 2015, doi: https://doi.org/10.1016/j.sse.2015.05.004. Y. Zhang et al., “Flexible transparent high-voltage diodes for energy management in wearable electronics,” Nano Energy, vol. 40, pp. 289–299, 2017, doi: https://doi.org/10.1016/j.nanoen.2017.08.025.
  4. N. Cheng, Y. Shao, J. Liu, and X. Sun, “Electrocatalysts by atomic layer deposition for fuel cell applications,” Nano Energy, vol. 29, pp. 220–242, 2016, doi: https://doi.org/10.1016/j.nanoen.2016.01.016.
  5. B. Yan, G. Yue, J. M. Owens, J. Yang, and S. Guha, “Light-induced metastability in hydrogenated nanocrystalline silicon solar cells,” Appl Phys Lett, vol. 85, no. 11, pp. 1925–1927, Sep. 2004, doi: 10.1063/1.1790072. C. G. Granqvist, “Transparent conductors as solar energy materials: A panoramic review,” Solar Energy Materials and Solar Cells, vol. 91, no. 17, pp. 1529–1598, 2007, doi: https://doi.org/10.1016/j.solmat.2007.04.031.
  6. Y.-H. Tak, K.-B. Kim, H.-G. Park, K.-H. Lee, and J.-R. Lee, “Criteria for ITO (indium–tin-oxid