Dergiler / Sakarya University Journal of Science / 2017 / Cilt: 21 Sayı: 3

Dispers Blue 56 Boyasının Fe3O4 Gömülü Akrilamit Temelli Polimer İle Giderimi

Removal of disperse blue 56 dye by Fe3O4 embedded acrylamide based polymer

Sayfa
363–371
Yayın Tarihi
2017-06-01
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

Sonuçlara göre adsorpsiyonun yalancı ikinciderece kinetik modeline ve Langmuir izotermine uyduğu görülmüştür.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:Bu çalışmada Dispers Mavi 56 isimli boyanın Fe3O4 tanecikleri gömülü akrilamit - triazin polimeri ile giderimiaraştırılmıştır.
📊
Temel Bulgular & Veri:Adsorpsiyona etki edebilecek olan, pH, etkileşim zamanı, karıştırma hızı, sıcaklık, başlangıç boyakonsantrasyonu ve adsorbent miktarı parametreleri incelenmiştir.
💡
Sonuç & Katkı:Sonuçlara göre adsorpsiyonun yalancı ikinciderece kinetik modeline ve Langmuir izotermine uyduğu görülmüştür.
🔬Tür:Modelleme & Sayısal Simülasyon
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Fe3O4 · Akrilamit · Dispers Blue 56

Özet

Bu çalışmada Dispers Mavi 56 isimli boyanın Fe3O4 tanecikleri gömülü akrilamit - triazin polimeri ile giderimiaraştırılmıştır. Adsorpsiyona etki edebilecek olan, pH, etkileşim zamanı, karıştırma hızı, sıcaklık, başlangıç boyakonsantrasyonu ve adsorbent miktarı parametreleri incelenmiştir. Optimum koşullar altında, 25 mg/L başlangıç boyakonsantrasyonu ve 1.5 g polimer kullanılarak %96.6 giderim verimine ulaşılmıştır. Boya konsantrasyon ölçümleri UVVis spektrofotometresi kullanılarak yapılmıştır. Sentezlenen polimerin adsorpsiyon öncesi ve sonrası FTIRspektrumları alınmıştır. Adsorpsiyon mekanizmasını araştırmak amacıyla yalancı birinci derece modeli, yalancı ikinciderece modeli, Langmuir ve Freundlich izoterm sabitleri hesaplanmıştır. Sonuçlara göre adsorpsiyonun yalancı ikinciderece kinetik modeline ve Langmuir izotermine uyduğu görülmüştür.

Abstract

In this study, removal of Disperse Blue 56 dye by Fe3O4 particles embedded acrylamide – triazine polymer wasinvestigated. The possible effects of pH, interaction time, agitation speed, temperature, initial dye concentration andadsorbent dosage parameters on the adsorption were investigated. In the presence of 25 mg/L concentration of dye, theremoval efficiency was reached 96.6% by using 1.5 g of polymer under optimum conditions. Dye concentrations weremeasured by UV-Vis spectrophotometer. The FTIR spectra of synthesized polymer were taken before and afteradsorption. In order to investigate adsorption mechanism, the constants of pseudo-first-order, pseudo-second-order,Langmuir and Freundlich isotherms were calculated. According to the results, the adsorption well fitted with pseudosecond-order kinetic model and Langmuir isotherm.

🔖

Bu Makaleye Atıf Yap

KESKİN, C. S. (2017). Dispers Blue 56 Boyasının Fe3O4 Gömülü Akrilamit Temelli Polimer İle Giderimi. Sakarya University Journal of Science, Cilt: 21 Sayı: 3, 363–371. https://ajindex.com/articles/942333

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (12)

  1. C. S. Keskin, A. Özdemir ve İ. A. Şengil, "Simultaneous decolorization of binary mixture of reactive yellow and acid violet from wastewaters by electrocoagulation," Water Sci. Technol., cilt 63, no. 8, pp. 1644-1650, 2011
  2. P. Pandit ve S. Basu, "Removal of ıonic dyes from water by solvent extraction using reverse micelles," Environ. Sci. Technol., cilt 38, pp. 2435-2442, 2004
  3. H. Zou, W. Ma ve Y. Wang, "A novel process of dye wastewater treatment by linking advanced chemical oxidation with biological oxidation," Arch. Environ. Prot., cilt 41, no. 4, pp. 33-39, 2015
  4. Z. Rais, L. El Hassani, J. Manghnouje, M. Hadji, R. Ibnelkhayat, R. Nejjar, A. Kherbeche ve A. Chaqroune, "Dyes’ removal from textile wastewater by phosphogypsum using coagulation and precipitation method," Phys. Chem. News, cilt 7, pp. 100-109, 2002
  5. M. X. Zhu, L. Lee, H. H. Wang ve Z. Wang, "Removal of an anionic dye by adsorption/precipitation processes using alkaline white mud," J. Hazard. Mater., cilt 149, pp. 735-741, 2007
  6. P. L. Hariani, M. Faizal, R. Marsi ve D. Setiabudidaya, "Synthesis and properties of Fe3O4 nanoparticles by co-precipitation method to removal procion dye," Int. J. Environ. Sci. Dev., cilt 4, no. 3, pp. 336-340, 2013
  7. M. Farrokhi, S. C. Hosseini, J. K. Yang ve M. Shirzad-Siboni, "Application of ZnO–Fe3O4 nanocomposite on the removal of azo dye from aqueous solutions: kinetics and equilibrium studies," Water Air Soil Pollut., cilt 225, p. 2113, 2014
  8. R. Dhodapkar, N. N. Rao, S. P. Panda ve S. N. Kaul, "Removal of basic dyes from aqueous medium using a novel polymer: Jalshakti," Biosource Technol., cilt 97, pp. 877-885, 2006
  9. A. A. El-Zahhar, N. S. Awwad ve E. E. El-Katori, "Removal of bromophenol blue dye from industrial waste water by synthesizing polymer-clay composite," J. Mol. Liq., cilt 199, pp. 454-461, 2014
  10. B. Batra, S. Lata ve C. S. Pundir, "Construction of an improved amperometric acrylamide biosensor based on hemoglobin immobilized onto carboxylated multi-walled carbon nanotubes/iron oxide nanoparticles/chitosan composite film," Bioprocess Technol., cilt 97, pp. 877-885, 2006
  11. M. Özacar ve İ. A. Şengil, "Equilibrium data and process design for adsorption of disperse dyes onto Alunite," Environ. Geol., cilt 45, pp. 762-768, 2004
  12. İ. Şahin, S. Yılmzaer Keskin ve C. S. Keskin, "Biosorption of cadmium, manganese, nickel, lead, and zinc ions by Aspergillus tamarii," Des. Water, cilt 51, pp. 4524-4529, 2013. [13]