KaydedilenlerDerginizi ekleyin

Dergiler / Sakarya University Journal of Science / 2018 / Cilt: 22 Sayı: 5

Surface Alloying Of Titanium With Nickel By Using Cathodic Arc Based Plasma Treatment

Nagihan Sezgin
Erkan KAÇAR
Kürşat KAZMANLI
Mustafa ÜRGEN
Sayfa
1181–1189
Yayın Tarihi
2018-10-01
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

This process provides rapid diffusion of nickel into the titanium and high diffusion depths were obtained compared to literature studies.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:In this study, cathodic arc electron / metal ion treatment (CA-EMIT) technique was used to modify Ti surfaces in Ni cathodic arc plasma.
📊
Temel Bulgular & Veri:At this novel method, AC bias was applied to the Ti substrates.
💡
Sonuç & Katkı:This process provides rapid diffusion of nickel into the titanium and high diffusion depths were obtained compared to literature studies.
🔬Tür:Araştırma Makalesi
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Ni-Ti diffusion · Intermetallics · Cathodic Arc PVD

Abstract

In this study, cathodic arc electron / metal ion treatment (CA-EMIT) technique was used to modify Ti surfaces in Ni cathodic arc plasma. At this novel method, AC bias was applied to the Ti substrates. In positive cycle of AC bias, the substrates were heated by electrons while nickel ions were directed toward the substrate surface in negative cycle. The surface modification processes were performed at 5 different temperatures: 1073 K (800 °C), 1273 K (1000 °C), 1373 K (1100 °C), 1473 K (1200 °C) and 1573 (1300 °C). The samples were characterized by XRD, SEM and EDS analysis. The effect of substrate temperature and cathode current were investigated on microstructure of the samples. This process provides rapid diffusion of nickel into the titanium and high diffusion depths were obtained compared to literature studies.

🔖

Bu Makaleye Atıf Yap

Sezgin, N., KAÇAR, E., KAZMANLI, K., ÜRGEN, M. (2018). Surface Alloying Of Titanium With Nickel By Using Cathodic Arc Based Plasma Treatment. Sakarya University Journal of Science, Cilt: 22 Sayı: 5, 1181–1189. https://ajindex.com/articles/942128

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (15)

  1. G. F. Bastin and G. D. Rieck, Diffusion in the Titanium-Nickel System: I. Occurrence and Growth of the Various Intermetallic Compounds, Metall. Trans., 1974, vol. 5, pp. 1817-26
  2. G. F. Bastin and G. D. Rieck, Diffusion in the Titanium-Nickel System: II. Calculations of Chemical and Intrinsic Diffusion Coefficients, Metall.Trans, 1974, vol. 5, pp. 1827-31
  3. J.E. Garay, U. Anselmi-Tamburini 1, Z.A. Munir, Enhanced growth of intermetallic phases in the Ni–Ti system by current effects, Acta Mater., 2003, vol. 51, pp. 4487-95
  4. J. Laeng, Z. Xiu, X. Xu, X. Sun, H. Ru and Y. Liu, Phase formation of Ni–Ti via solid state reaction, Phys. Scr., 2007, vol. T129, pp. 250–254
  5. X. Shao, X. Guo, Y. Han, Z. Lin, J. Qin, W. Lu and D. Zhang, Preparation of TiNi films by diffusion technology and the study of the formation sequence of the intermetallics in Ti–Ni systems, J. Mater. Res., 2014, vol. 29, pp. 2707-16
  6. X. Shao, X. Guo, Y. Han, W. Lu, J. Qin, D. Zhang, Characterization of the diffusion bonding behavior of pure Ti and Ni with different surface roughness during hot pressing, Mater. Des., 2015, vol. 65, pp. 1001–10
  7. P. Novák, L. Mejzlíková, A. Michalcová, J. Capek, P. Beran, D. Vojtech, Effect of SHS conditions on microstructure of NiTi shape memory alloy, Intermetallics, 2013, vol. 42, pp. 85-91
  8. P. Novák, P.Pokorný, V. Vojtech, A. Knaislova, A. Skolakova, J. Capek, M. Karlík, J. Kopecek, Formation of Ni-Ti intermetallics during reactive sintering at 500-650 °C, Mater. Chem. Phys., 2015, vol. 155, pp. 113-121
  9. A. Elrefaey, L. Wojarski, J. Janzcak-Rusch and W. Tillmann, Vacuum brazing titanium using thin nickel layer deposited by PVD technique, Mater. Sci. Eng. A, 2013, vol. 565, pp. 180-186
  10. I. Rampin, K. Brunelli, M. Dabalà, M. Magrini, Effect of diffusion of Ni and B on the microstructure and hardness of Ti Cp, J. Alloys Compd., 2009, vol. 48, pp. 1246–53
  11. D.Y. Li, A new type of wear-resistant material: pseudo-elastic TiNi alloy, Wear, 1998, vol. 22, pp. 1116–23
  12. H.Hiraga, T. Inoue, H. Shimura, A. Matsunawa, Cavitation erosion mechanism of NiTi coatings made by laser plasma hybrid spraying, Wear, 1999, vol. 231, pp. 272-278
  13. F. Gao and H.M. Wang, Dry sliding wear property of a laser melting/deposited Ti2Ni/TiNi intermetallic alloy, Intermetallics, 2008, vol. 16, pp. 202-208
  14. Murray J. L., ASM Handbook vol. 3: Alloy Phase Diagrams, ASM International, USA, 1992, pp. 319
  15. S. Oncel, Production of NiAl therm