Transmission electron microscopy (TEM) analysis showed that the thickness of martensite plates in ribbons was thinned by the addition of Zr.
📌 3 Maddede Bu Makale
🎯
Amaç & Hipotez:In this study, the effects of Zr addition on phase transformation temperatures, microstructure of Ti-12V-4Al (wt. %) high temperature shape memory alloys (HTSMAs) manufactured using melt-spinning technique were investigated.
📊
Temel Bulgular & Veri:During heating, differential scanning calorimetry (DSC) curves showed that austenite transformation temperature of Ti-12V-4Al (wt. %) melt-spun ribbon was single-stage transformation and Ti-12V-4Al-0.5Zr (wt. %) melt-spun ribbon was two-stage transformation.
💡
Sonuç & Katkı:Transmission electron microscopy (TEM) analysis showed that the thickness of martensite plates in ribbons was thinned by the addition of Zr.
🔬Tür:Araştırma Makalesi
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:High temperature · shape memory alloys · phase transition
Abstract
In this study, the effects of Zr addition on phase transformation temperatures, microstructure of Ti-12V-4Al (wt. %) high temperature shape memory alloys (HTSMAs) manufactured using melt-spinning technique were investigated. During heating, differential scanning calorimetry (DSC) curves showed that austenite transformation temperature of Ti-12V-4Al (wt. %) melt-spun ribbon was single-stage transformation and Ti-12V-4Al-0.5Zr (wt. %) melt-spun ribbon was two-stage transformation. In the scanning electron microscopy (SEM) and X-ray diffraction (XRD) analyzes, unveiled that the melt-spun ribbons consisted of martensite, austenite and R phases. Transmission electron microscopy (TEM) analysis showed that the thickness of martensite plates in ribbons was thinned by the addition of Zr.
BAĞ, Ö., YILMAZ, F., KÖLEMEN, U., ERGEN, S. (2021). Microstructures and Phase Transformations of Melt-Spun Ti-V-Al High Temperature Shape Memory Alloys with Addition of Zr. Sakarya University Journal of Science, Cilt: 25 Sayı: 3, 735–740. https://ajindex.com/articles/941801
C. M. Wayman, K. Otsuka, “Shape Memory Materials,” Cambridge University Press, 1998
R. D. Noebe, T. Biles, S. A. Padula, “NiTibased high temperature shape-memory alloys: properties, prospects, and potential applications, in ‘Advanced structural materials: properties, design optimization, and applications,” (ed. W. O. Soboyejo and T. S. Srivatsan); New York, Taylor & Francis Group, 2007
Q. Li, J. Li, G. Ma, X. Liu, D. Pana, “Influence of ω phase precipitation on mechanical performance and corrosion resistance of Ti–Nb–Zr alloy,” Material and Design, 11C, pp. 421-428, 2016
J. Wang, Q. Li, C. Xiong, Y. Li, B. Sun, “Effect of Zr on the martensitic transformation and the shape memory effect in Ti-Zr-Nb-Ta high-temperature shape memory alloys,” Journal of Alloys and Compounds, 737, pp. 672-677, 2018
X. Yi, Y. Wang, B. Sun, B. Cui, J. Liu, X. Meng, Z. Gao, W. Cai, L. Zhao, “Crystallization process and microstructural evolution of as-spun Ti-Ni-Zr alloy ribbon,” Journal of Alloys and Compounds, 762, pp. 62-66, 2018
C. Xiong, L. Yaoa, B. Yuan, W. Qu,, Y. Li, “Strain induced martensite stabilization and shape memory effect of Ti-20Zr–10Nb–4Ta alloy,” Materials Science&Engineering A, 658, pp. 28–32, 2016
O. Uzun, T. Karaaslan, M. Keskin, “Production and structure of rapidly solidified Al–Si alloys,” Turk J. Phys., 25:455–66, 2001
O. Uzun, T. Karaaslan, M. Göğebakan, M. Keskin, “Hardness and microstructural characteristics of rapidly solidified Al–8–16 wt. % Si Alloys,” J. Alloys Compd., 376:149–57, 2004
Y. Kim, Y. Yun, T. Nam, “The effect of the melt spinning processing parameters on the solidification structures in Ti–30 at.% Ni–20 at.% Cu shape memory alloys,” Mater Sci Eng A., 438–440:545–8, 2006
H.Y. Kim, M. Mizutani, S. Miyazaki, “Crystallization process and shape memory properties of TieNieZr thin films,” Acta Mater., 57, 1920-1930, 2009
Y. Motemani, P. J. McCluskey, C. W. Zhao, M. J. Tan, “Analysis of Ti-Ni- Hf shape memory alloys by combinatorial nanocalorimetry,” Acta Mater. 59, 7602- 7614, 2011
Y. Y. Li, S. S. Cao, X. Ma, C. B. Ke, X. P. Zhang, “Influence of strongly textured microstructure on the all-round shape memory effect of rapidly solidified Ni51Ti49 alloy,” Materials Science & Engineering A., 705, 273–281, 2017
S. Ergen, O. Uzun, F. Yılmaz, F. Kiliçaslan, “Shape memory properties and microstructural evolution of rapidly solidified CuAlBe alloys,” Materials Characterization, 80, pp.