KaydedilenlerDerginizi ekleyin

Dergiler / European Journal of Technique (EJT) / 2020 / Cilt: 10 Sayı: 1

CRASHWORTHINESS INVESTIGATION OF VEHICLE FRONT BUMPER BEAM WITH DIFFERENT CROSS-SECTIONS UNDER AXIAL DYNAMIC LOAD

Serkan ÖZEL
Selçuk KARAGÖZ
Hüseyin BEYTÜT
Sayfa
97–105
Yayın Tarihi
2020-06-01
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

RADIOSS/explicit and non-linear finite element codes were used.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:Bumper beam, is one of the first structures exposed to impact at the time of an accident.
📊
Temel Bulgular & Veri:AA6061-T6 Aluminum alloy was used as the material and Johnson-Cook was used as the material model.
💡
Sonuç & Katkı:RADIOSS/explicit and non-linear finite element codes were used.
🔬Tür:Modelleme & Sayısal Simülasyon
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Vehicle bumper beam · energy absorption · finite element method

Abstract

Bumper beam, is one of the first structures exposed to impact at the time of an accident. Therefore, how it behaves at the time of an accident is extremely important in terms of passenger safety, cargo and other critical parts of the vehicle. What is expected from a bumper beam is to absorb the kinetic energy of the vehicle through plastic deformation, particularly at low and medium speeds. In this study, finite element models of the crash situations of the bumper beams with five different cross-sectional geometries and equal weights were created by using the HyperMesh software and crash analyses were carried out. Since the bumper beams may behave differently in different barrier types, pole and wall barrier impact test was investigated. AA6061-T6 Aluminum alloy was used as the material and Johnson-Cook was used as the material model. The results revealed that the cross-sectional geometry had significant effect on crashworthiness and that the models exhibited different crashworthiness on wall and pole barriers. RADIOSS/explicit and non-linear finite element codes were used.

🔖

Bu Makaleye Atıf Yap

ÖZEL, S., KARAGÖZ, S., BEYTÜT, H. (2020). CRASHWORTHINESS INVESTIGATION OF VEHICLE FRONT BUMPER BEAM WITH DIFFERENT CROSS-SECTIONS UNDER AXIAL DYNAMIC LOAD. European Journal of Technique (EJT), Cilt: 10 Sayı: 1, 97–105. https://ajindex.com/articles/928184

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (13)

  1. Sun, G.Y., G.Y. Li, S.W. Zhou, H.Z. Li, S.J. Hou, and Q. Li,(2011) Crashworthiness design of vehicle by using multiobjective robust optimization. Structural and Multidisciplinary Optimization. 44(1): p. 99-110, doi:10.1007/s00158-010-0601-z
  2. Yang, R.J., N. Wang, C.H. Tho, and J.P. Bobineau,(2005) Metamodeling development for vehicle frontal impact simulation. Journal of Mechanical Design. 127(5): p. 1014-1020, doi:10.1115/1.1906264
  3. Jones, N., Structural impact. 2011: Cambridge university press
  4. Cheon, S.S. and J.H. Choi,(1995) Development of the composite bumper beam for passenger cars. Composite Structures. 32(1-4): p. 491-499, doi:10.1016/0263-8223(95)00078-X
  5. HASHIMOTO, N.,(2017) Application of Aluminum Extrusions to Automotive Parts. Kobelco Technology Review, (35): p. 69-75
  6. Safari, H., H. Nahvi, and M. Esfahanian,(2018) Improving automotive crashworthiness using advanced high strength steels. International Journal of Crashworthiness. 23(6): p. 645-659, doi:10.1080/13588265.2017.1389624
  7. Wierzbicki, T. and W. Abramowicz,(1983) On the Crushing Mechanics of Thin-Walled Structures. Journal of Applied Mechanics-Transactions of the Asme. 50(4a): p. 727-734, doi:Doi 10.1115/1.3167137
  8. Khatri, N.A., H. Shaikh, Z.A. Maher, A. Shah, and S.F. Ahmed,(2018) A Review on Optimization of Vehicle Frontal Crashworthiness for Passenger Safety. International Journal of Engineering & Technology. 7(2.34): p. 1-4, doi:10.14419/ijet.v7i2.34.13894
  9. Patil, S.A., R. Moradi, and H.M. Lankarani. Vehicle mass optimization for frontal structure using I-sight and study of weld parameterization for mass improvement. in ASME 2014 International Mechanical Engineering Congress and Exposition. 2014. American Society of Mechanical Engineers
  10. Zhang, Z.H., S.T. Liu, and Z.L. Tang,(2009) Design optimization of cross-sectional configuration of rib-reinforced thin-walled beam. Thin-Walled Structures. 47(8-9): p. 868-878, doi:10.1016/j.tws.2009.02.009
  11. Belingardi, G., A.T. Beyene, E.G. Koricho, and B. Martorana,(2015) Alternative lightweight materials and component manufacturing technologies for vehicle frontal bumper beam. Composite Structures. 120: p. 483-495, doi:10.1016/j.compstruct.2014.10.007
  12. Ding, M., J. Liu, B. Liu, X. Wang, T. Li, and D. Cao. On the development of automotive composite material rear bumper beam. in Proceedings of SAE-China Congress 2015: Selected Papers. 2016. Springer
  13. Wang, G., J. Zhou, Z. Liu, L. Li, B. Liu,