The obtained results were compared with the literature and it was proved that ferrochrome can be used as a reasonable aggregate in conductive mortars.
📌 3 Maddede Bu Makale
🎯
Amaç & Hipotez:Recently, it is known that carbon fiber, which is a conductive fiber, is used in different mixture designs and developing electrically conductive cementitious materials.
📊
Temel Bulgular & Veri:In this study, electrically conductive mortars were produced by using 100% recycled ferrochrome aggregate with a particle size of less than 1 mm as filling material and using carbon fiber (CF) in 4 different ratios, 0%, 0.5%, 0.75% and 1%. 2, 14, 28, 90 and 180 days electrical resistivity properties of the obtained samples were investigated.
💡
Sonuç & Katkı:The obtained results were compared with the literature and it was proved that ferrochrome can be used as a reasonable aggregate in conductive mortars.
Recently, it is known that carbon fiber, which is a conductive fiber, is used in different mixture designs and developing electrically conductive cementitious materials. However, the evaluation of ferrochrome as a recycled aggregate in the mixture of these special concretes has still not been investigated. In this study, electrically conductive mortars were produced by using 100% recycled ferrochrome aggregate with a particle size of less than 1 mm as filling material and using carbon fiber (CF) in 4 different ratios, 0%, 0.5%, 0.75% and 1%. 2, 14, 28, 90 and 180 days electrical resistivity properties of the obtained samples were investigated. In addition, 28-day compressive strength, flexural strength, dynamic resonance, ultrasonic pulse velocity (UPV), Leeb hardness, scanning electron microscope (SEM) and X-Ray Diffraction (XRD) tests were performed on all samples. The obtained results were compared with the literature and it was proved that ferrochrome can be used as a reasonable aggregate in conductive mortars.
M.Z. Islam, K.M.A. Sohel, K. Al-Jabri, A. Al Harthy, Properties of concrete with ferrochrome slag as a fine aggregate at elevated temperatures, Case Studies in Construction Materials. 15 (2021) e00599.
K. Al-Jabri, H. Shoukry, Influence of nano metakaolin on thermo-physical, mechanical and microstructural properties of high-volume ferrochrome slag mortar, Construction and Building Materials. 177 (2018) 210–221.
P.K. Acharya, S.K. Patro, Utilization of ferrochrome wastes such as ferrochrome ash and ferrochrome slag in concrete manufacturing, Waste Management and Research. 34 (2016) 764–774.
W. Abbass, M.I. Khan, S. Mourad, Evaluation of mechanical properties of steel fiber reinforced concrete with different strengths of concrete, Construction and Building Materials. 168 (2018) 556–569.
V.M. de Alencar Monteiro, L.R. Lima, F. de Andrade Silva, On the mechanical behavior of polypropylene, steel and hybrid fiber reinforced self-consolidating concrete, Construction and Building Materials. 188 (2018) 280–291.
A.I. Fares, K.M.A. Sohel, A. Al-mamun, Characteristics of ferrochrome slag aggregate and its uses as a green material in concrete – A review, Construction and Building Materials. 294 (2021) 123552.
K. Al-Jabri, H. Shoukry, I.S. Khalil, S. Nasir, H.F. Hassan, Reuse of Waste Ferrochrome Slag in the Production of Mortar with Improved Thermal and Mechanical Performance, Journal of Materials in Civil Engineering. 30 (2018).
M.K. Dash, S.K. Patro, Effects of water cooled ferrochrome slag as fine aggregate on the properties of concrete, Construction and Building Materials. 177 (2018) 457–466.
P. Niemelä, M. Kauppi, Production, characteristics and use of ferrochromium slags, Innovations In The Ferro Alloy Industry - Proceedings of the XI International Conference on Innovations in the Ferro Alloy Industry, Infacon XI. (2007) 171–179
B.B. Lind, A.-M. Fällman, L.B. Larsson, Environmental impact of ferrochrome slag in road construction, Waste Management. 21 (2001) 255–264.