These results showed that the optimum temperature value for bio-char production from walnut shell was 600 °C.
📌 3 Maddede Bu Makale
🎯
Amaç & Hipotez:The pyrolysis of the walnut shell was carried out in a lab-scale continuous fluidized bed reactor at a temperature range of 400 to 600 °C.
📊
Temel Bulgular & Veri:Increasing the pyrolysis temperature to 600 °C improved the High Heating Value (HHV) and % C value of the bio-char product.
💡
Sonuç & Katkı:These results showed that the optimum temperature value for bio-char production from walnut shell was 600 °C.
🔬Tür:Araştırma Makalesi
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Biomass · Bio-char · Fluidized Bed Reactor
Abstract
The pyrolysis of the walnut shell was carried out in a lab-scale continuous fluidized bed reactor at a temperature range of 400 to 600 °C. Thermogravimetric analysis technique was used to determine the thermal properties of the walnut shell. The bio-char product obtained from pyrolysis was analyzed to evaluate the effect of the pyrolysis temperature. Increasing the pyrolysis temperature to 600 °C improved the High Heating Value (HHV) and % C value of the bio-char product. These results showed that the optimum temperature value for bio-char production from walnut shell was 600 °C.
YİLDİZ, Z., CEYLAN, S. (2018). Pyrolysis of walnut shell biomass in fluidized bed reactor: Determination of optimum conditions for bio-char production. Environmental Research and Technology, Cilt: 1 Sayı: 4, 47–51. https://ajindex.com/articles/904922
M.S. Masnadi, R. Habibi, J. Kopyscinski, J.M. Hill, X. Bi, C.J. Lim, N. Ellis, J.R Grace, “Fuel characterization and co-pyrolysis kinetics of biomass and fossil fuels,” Fuel, 117, 1204–1214. 2014
H. Ly Vu, S.S. Kim, H.C. Woo, J.H. Choi, D.J. Suh, J. Kim, “Fast pyrolysis of macroalga Saccharina japonica in a bubbling fluidized bed reactor for bio-oil production,” Energy, 93, 1436-1446. 2015
M. Tripathi, J.N. Sahu, P. G, “Effect of process parameters on production of biochar from biomass waste through pyrolysis: A review,” Renewable and Sustainable Energy Reviews, 55, 467–481. 2016
Y.J. Zhang, Z.J. Xing, Z.K. Duan, M. Li, Y. Wang, “Effects of steam activation on the pore structure and surface chemistry of activated carbon derived from bamboo waste”, Appl. Surf. Sci., 315, 279–286, 2014
D. Czajczynska, L. Anguilano, H. Ghazal, R. Krzyzynska, A.J. Reynolds, N. Spencer, H. Jouhara, “Potential of pyrolysis processes in the waste management sector”, Thermal Science and Engineering Progress, 3, 171–197, 2017
N. Soyler, J. L. Goldfarb, S. Ceylan, M. T. Saçan, “Renewable fuels from pyrolysis of Dunaliella tertiolecta: An alternative approach to biochemical conversions of microalgae,” Energy, 1-8, 2016
M. A. Mehmood, G. Ye, H. Luo, C. Liu, S. Malik, I. Afzal, J. Xu, M. S. Ahmad, “Pyrolysis and kinetic analyses of Camel grass (Cymbopogon schoenanthus) for bioenergy,” Bioresorce Technology, 228, 18–24, 2017
H. Karatas, F. Akgun, “Experimental results of gasification of walnut shell and pistachio shell in a bubbling fluidized bed gasifier under air and steam atmospheres,” Fuel, 214, 285–292, 2018
B. B. Uzun, E. Yaman, “Pyrolysis kinetics of walnut shell and waste polyolefins using thermogravimetric analysis,” Journal of the Energy Institute, 90, 825-837, 2017
S. Abhishek, P. Vishnu, Z. Dongke, “Biomass pyrolysis—A review of modelling, process parameters and catalytic studies,” Renewable and Sustainable Energy Reviews, 50, 1081–1096, 2015
X. Yuan, Z. Shuai, B. Robert C., K. Atul, B. Xianglan, “Fast pyrolysis of biomass and waste plastic in a fluidized bed reactor,” Fuel, 156, 40-46, 2015
W. Hideo, L. Dalin, N. Yoshina, T. Keiichi, K. Kunimitsu, M.W. Makoto, “Characterization of oil-extracted residue biomass of Botryococcus braunii as a biofuel feedstock and its pyrolytic behavior,” Applied Energy, 132, 475-484, 2014.