Dergiler / Tekstil ve Konfeksiyon / 2020 / Cilt: 30 - Sayı: 1

EFFECT OF DEPOSITION TIME ON THE OPTOELECTRICAL PROPERTIES OF ELECTROSPUN PAN/AGNO3 NANOFIBERS

Sayfa
29–34
Yayın Tarihi
2020-03-25
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

It was seen that the results were comparable with the literature and conducting PAN/AgNO3 nanofibers are promising for future applications.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:The aim of this study is to produce optically transparent nanofibers with adequate electrical conductivity for optoelectrical applications where transparency and conductivity are needed.
📊
Temel Bulgular & Veri:Therefore, conducting polyacrylonitrile/silver nitrate (PAN/AgNO3) nanofibers were produced by electrospinning with different deposition times ranging from 1 minute to 10 minutes.
💡
Sonuç & Katkı:It was seen that the results were comparable with the literature and conducting PAN/AgNO3 nanofibers are promising for future applications.
🔬Tür:Araştırma Makalesi
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:sheet resistance · optical transparency · polyacrylonitrile

Abstract

The aim of this study is to produce optically transparent nanofibers with adequate electrical conductivity for optoelectrical applications where transparency and conductivity are needed. Therefore, conducting polyacrylonitrile/silver nitrate (PAN/AgNO3) nanofibers were produced by electrospinning with different deposition times ranging from 1 minute to 10 minutes. The effect deposition time on the sheet resistance and optical transparency of the nanofibers were investigated. The surface characteristics, electrical properties and transmittance values of the electrospun mats were evaluated. Nanofibers with diameters under 700 nm were obtained. With the increasing deposition time, the sheet resistance and transparency of the samples were decreased. In order to figure out the optimum deposition time, figure of merit of the samples were calculated. Figure of merit results showed that the sample deposited for three minutes had the best performance among the others. It was seen that the results were comparable with the literature and conducting PAN/AgNO3 nanofibers are promising for future applications.

🔖

Bu Makaleye Atıf Yap

DUZYER, S. (2020). EFFECT OF DEPOSITION TIME ON THE OPTOELECTRICAL PROPERTIES OF ELECTROSPUN PAN/AGNO3 NANOFIBERS. Tekstil ve Konfeksiyon, Cilt: 30 - Sayı: 1, 29–34. https://ajindex.com/articles/88921

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (16)

  1. Huang, Z.M., Zhang, Y.Z., Kotaki, M., Ramakrishna, S. (2003). A review on polymer nanofibers by electrospinning and their applications in nanocomposites. Comp. Sci. and Technol., 63 (15): 2223-2253
  2. Bhardwaj, N., Kundu, S.C. (2010). Electrospinning: a fascinating fiber fabrication technique. Biotechnol. Adv. 28: 325-347
  3. Greiner, A., Wendorff, J.H. (2007). Electrospinning: a fascinating method for the preparation of ultrathin fibers, Angew. Chemie Int. Ed., 46: 5670-5703
  4. Li, D., Xia, Y. (2004). Electrospinning of Nanofibers: Reinventing the Wheel?, Adv. Mater., 16:1151-1171
  5. Almetwally, A.A., El-Sakhawy, Mohamed, Elshakankery, M.H., Kasem, M.H. (2017). Technology of nano-fibers: production techniques and properties - critical review, Journal of the Textile Association, 78:5-14
  6. Nayak, R., Padhye, R., Kyratzis, I.L., Truong, Y.B., Arnold, L. (2012). Recent advances in nanofibre fabrication techniques, Text. Res. J. 82:129-147
  7. Hu, L., Wu, H., Cui, Y. (2011). Metal nanogrids, nanowires, and nanofibers for transparent electrodes, MRS Bulletin Cambridge, 36(10):760-776
  8. Wu, H., Hu, L., Rowell, M.W., Kong, D., Cha, J.J., McDonough, J.R., Zhu, J., Yang, Y., McGehee, M.D., Cui, Y. (2010). Electrospun metal nanofiber webs as high-performance transparent electrode, Nano Lett. 10(10): 4242-4248
  9. Li, H., Pan, W., Zhang, W., Huang, S., Wu, H. (2013). TiN Nanofibers: A New Material with High Conductivity and Transmittance for Transparent Conductive Electrodes, Adv. Funct. Mater. 23(2):209-214
  10. MacDiarmid, A.G. (2001). "Synthetic Metals": A Novel Role for Organic Polymers (Nobel Lecture), Angew. Chemie Int. Ed. 40(14):2581-2590
  11. Zhao, W., Yalcin, B., Cakmak, M. (2015). Dynamic assembly of electrically conductive PEDOT:PSS nanofibers in electrospinning process studied by high speed video, Synth. Met. 203:107-116
  12. Wang, Y., Jing, X. (2007). Transparent conductive thin films based on polyaniline nanofibers, Mater. Sci. Eng., B. 138:95-100
  13. Chronakis, I. S., Grapenson, S., Jakob, A. (2006). Conductive polypyrrole nanofibers via electrospinning: Electrical and morphological properties, Polymer, 47(5), 1597-1603
  14. Duzyer, S. (2019). Different Methods of Fabricating Conductive Nanofibers, Tekstil ve Konfeksiyon, 29(1):78-85
  15. Ko, F., Gogotsi, Y., Ali, A., Naguib, N., Ye, H., Yang, G.L., Li, C., Willis, P. (2003). Electrospinning of continuous carbon nanotube-filled nanofiber yarns, Adv. Mater. 15(14):1161-1165
  16. Fu, Y., Li