Dergiler / Turkish Journal of Civil Engineering / 2023 / Cilt: 34 - Sayı: 2

Effects of Pore Fluid and Surface Roughness on Geomembrane - Soil Interface Behavior

Sayfa
35–56
Yayın Tarihi
2023-03-01
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

While acidic mine drainage is the leachate that affects the shearing behavior of the geomembrane in the most negative way, coal combustion product is the leachate that has the least negative impact.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:In this study, direct shear tests were conducted on soil - geomembrane interfaces.
📊
Temel Bulgular & Veri:The initial void ratio and internal friction angles of sand/bentonite and crushed sand were 0.34, 0.52, and 23⁰, 35⁰, respectively.
💡
Sonuç & Katkı:While acidic mine drainage is the leachate that affects the shearing behavior of the geomembrane in the most negative way, coal combustion product is the leachate that has the least negative impact.
🔬Tür:Araştırma Makalesi
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:interface shear strength · Geomembrane · leachate

Abstract

In this study, direct shear tests were conducted on soil - geomembrane interfaces. Sand/bentonite mixture and crushed sand were tested in contact with two geomembranes of the same type. To examine the effect of leachate on the mechanical properties of the geomembrane, acidic mine drainage, coal combustion product, and municipal solid waste leachates were prepared in the laboratory. The initial void ratio and internal friction angles of sand/bentonite and crushed sand were 0.34, 0.52, and 23⁰, 35⁰, respectively. In the smooth geomembrane - soil interface, the minimum interface friction angle (18⁰) was obtained on acidic mine drainage cured geomembrane – sand/bentonite, while the maximum (31⁰) interface friction angle was obtained on uncured geomembrane - crushed sand. In the textured geomembrane - soil interface, the minimum interface friction angle (17⁰) was obtained on acidic mine drainage cured geomembrane – sand/bentonite, while the maximum (43⁰) interface friction angle was obtained on uncured geomembrane - crushed sand. The friction angle of the crushed sand - geomembrane surface is higher than the friction angle of the sand/bentonite - geomembrane surface. While acidic mine drainage is the leachate that affects the shearing behavior of the geomembrane in the most negative way, coal combustion product is the leachate that has the least negative impact.

🔖

Bu Makaleye Atıf Yap

DEVELİOGLU, I., PULAT, H. F. (2023). Effects of Pore Fluid and Surface Roughness on Geomembrane - Soil Interface Behavior. Turkish Journal of Civil Engineering, Cilt: 34 - Sayı: 2, 35–56. https://ajindex.com/articles/888731

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (12)

  1. Bonnour, H., Barral, C., Touze-Foltz, N. Altered geosynthetic clay liners: effect on the hydraulic performance of composite liners. Europ. J. Environ. Civ. Eng., 19(9), 1155 – 1176, 2015. https://doi.org/10.1080/19648189.2015.1005161. Sabiri,N.E., Caylet, A., Montillet, A., Le Coq, L., Durkheim, Y. Performance of nonwoven geotextiles on soil drainage and filtration. Europ. J. Environ. Civ. Eng., 24(5), 670 – 688, 2020. https://doi.org/10.1080/19648189.2017.1415982.
  2. Chen, W., Xu, T., Zhou, W. Microanalysis of smooth Geomembrane–Sand interface using FDM–DEM coupling simulation” Geotext. Geomembr., 49, 276 – 288, 2021. https://doi.org/10.1016/j.geotexmem.2020.10.022.
  3. Pivato, A. Landfill Liner Failure: An Open Question for Landfill Risk Analysis. J. Environ. Protect., 2, 287 – 297, 2017. https://doi.org/10.4236/jep.2011.23032.
  4. Koda, E., Grzyb, M., Osiński, P., Vaverková, M.D. Analysis of failure in landfill and Hydraulic Properties of Three Geosynthetics. J. Geotech. Geoenviron. Eng., 131(8), 937 – 950, 2019.
  5. Pulat, H.F., Yukselen-Aksoy, Y. Compaction behavior of synthetic and natural MSW samples in different compositions. Waste. Manag. Res.: J. Sustain. Circ. Econo, 31(12), 1255 – 1261, 2013. https://doi.org/10.1177/0734242X13507967.
  6. Pulat, H.F., Yukselen-Aksoy, Y. Factors affecting the shear strength behavior of municipal solid wastes. Waste. Manag., 69, 215 – 224, 2017. https://doi.org/10.1016/j.wasman.2017.08.030.
  7. Pulat, H.F., Yukselen-Aksoy, Y. Compressibility and shear strength behaviour of fresh and aged municipal solid wastes. Environ. Geotech., 9(1), 55 – 63, 2022. https://doi.org/10.1680/jenge.18.00019.
  8. Feng, S.J., Cheng, D. Shear strength between soil/geomembrane and geotextile/geomembrane interfaces. Tunneling and Underground Construction, Shanghai, China, 26 – 28 May, 558 – 569, 2014.
  9. Oren, A.H., Ozturk, M., Ozdamar Kul, T., Nart, Z. Barrier performance of geosynthetic clay liners to copper (II) chloride solutions. Environ. Geotech., 7(7), 491 – 500, 2020. https://doi.org/10.1680/jenge.18.00024.
  10. Zhou, L., Zhu, Z., Yu, Z., Zhang, C. Shear Testing of the Interfacial Friction Between an HDPE Geomembrane and Solid Waste. Mater., 13, 1 – 16, 2020. https://doi.org/10.3390/ma13071672.
  11. Ghazizadeh, S., Bareither, C. A. Failure mechanism of geosynthetics clay liner and textured geomembrane composite systems. Geotext. Geomembr., 49, 789 – 803, 2021. https://doi.org/10.1016/j.geotexmem.2020.12.009.
  12. Seed, R. B., Mitchell, J. K., Seed, H. B. Slope Stability