Dergiler / International Advanced Researches and Engineering Journal / 2022 / Cilt: 6 - Sayı: 3

Production and characterization of activated carbon from Black Poplar (Populus Nigra) wood waste with different chemical activation methods

Sayfa
167–175
Yayın Tarihi
2022-12-15
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

In addition, EDS analysis showed that the activated carbon produced from black poplar wood waste was purer than commercial activated carbon.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:In this study, the producibility of activated carbon from wood waste by using the chemical activation method was investigated and the produced activated carbon was compared with commercial activated carbon.
📊
Temel Bulgular & Veri:Activated carbon was produced from black poplar wood waste using zinc chloride and phosphoric acid.
💡
Sonuç & Katkı:In addition, EDS analysis showed that the activated carbon produced from black poplar wood waste was purer than commercial activated carbon.
🔬Tür:Araştırma Makalesi
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Activated carbon · Black Poplar · Chemical activation

Abstract

In this study, the producibility of activated carbon from wood waste by using the chemical activation method was investigated and the produced activated carbon was compared with commercial activated carbon. Activated carbon was produced from black poplar wood waste using zinc chloride and phosphoric acid. The density values of the produced activated carbons were determined by the picometer method. Field Emission Scanning Electron Microscopy (FESEM) was used to analyze the microstructure and perform the elemental mapping. To determine the chemical content of activated carbon, it was also characterized by Fourier-transform infrared spectroscopy (FTIR) and energy dispersion spectroscopy (EDS). Based on the density and FE-SEM results, it was determined that the produced activated carbon had a lower density and porous structure. In addition, EDS analysis showed that the activated carbon produced from black poplar wood waste was purer than commercial activated carbon.

🔖

Bu Makaleye Atıf Yap

ERGÜN, M. E., BULBUL, S. (2022). Production and characterization of activated carbon from Black Poplar (Populus Nigra) wood waste with different chemical activation methods. International Advanced Researches and Engineering Journal, Cilt: 6 - Sayı: 3, 167–175. https://ajindex.com/articles/878946

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (13)

  1. Çiftçi, H., Aktif karbonla topraktan tuz adsorpsiyonu yolu ile tuzlanmış tarım arazilerinin ıslah edilebileceğinin araştırılması, Msc Thesis, Harran Üniversitesi, Fen Bilimleri Enstitüsü (2013)
  2. Baytar, O., İğde çekirdeği ve kayın ağacından üretilen aktif karbonun ağır metal ve boyarmadde gideriminde kullanılması, Doktora Tezi, Selçuk Üniversitesi, Fen Bilimleri Enstitüsü (2015)
  3. Quinlivan, P.A., L. Li and D.R.U. Knappe, Effects of activated carbon characteristics on the simultaneous adsorption of aqueous organic micropollutants and natural organic matter. Water Research, 2005. 39(8): p. 1663–1673
  4. Okiel, K., M. El-Sayed and M.Y. El-Kady, Treatment of oil–water emulsions by adsorption onto activated carbon, bentonite and deposited carbon. Egyptian Journal of Petroleum, 2011. 20(2): p. 9–15
  5. Kantarli, I.C. and J. Yanik, Activated carbon from leather shaving wastes and its application in removal of toxic materials. Journal of Hazardous Materials, 2010. 179(1): p. 348–356
  6. Bülbül, Ş. and N. Akcakale, The Production and mechanical properties of carburized corn cob ash added rubber compounds. KGK-Kautschuk Gummi Kunststoffe, 2019. 72(4/19): p. 30–35
  7. Bülbül, Ş., N. Akçakale, M. Yaşar and H. Gökmeşe, The effect of wood ash on the mechanical properties of rubber compounds. Materiali in Tehnologije, 2019. 53(3): p. 333–339
  8. Bulbul, S., M. Yasar and N. Akcakale, Effect of Changing of Filling Materials in NR-SBR Type Elastomer Based Rubber Materials on Mechanical Properties. Polymer(Korea), 2014. 38(5): p. 664–670
  9. Naji, S.Z. and C.T. Tye, A review of the synthesis of activated carbon for biodiesel production: Precursor, preparation, and modification. Energy Conversion and Management: X, 2022. 13: p. 100152
  10. González-García, P., Activated carbon from lignocellulosics precursors: A review of the synthesis methods, characterization techniques and applications. Renewable and Sustainable Energy Reviews, 2018. 82: p. 1393–1414
  11. Roy, G.M., Activated Carbon Applications in the Food and Pharmaceutical Industries. 1994. CRC Press
  12. Amine, A., H. Mohammadi, I. Bourais and G. Palleschi, Enzyme inhibition-based biosensors for food safety and environmental monitoring. Biosensors and Bioelectronics, 2006. 21(8): p. 1405–1423
  13. Sha, Y., J. Lou, S. Bai, D. Wu, B. Liu and Y. Ling, Facile preparation of nitrogen-doped porous carbon from waste tobacco by a simple pre-treatment process and their application in electrochemical capacitor and CO2 c