KaydedilenlerDerginizi ekleyin

Dergiler / International Scientific and Vocational Studies Journal / 2022 / Cilt: 6 - Sayı: 2

Investigation Of Mechanical Properties Of Nano Boron Nitride Added Aluminum Material Produced By Different Production Method

Hıdır Sercan ÇUBUK
Uğur ÇAVDAR
Sayfa
51–59
Yayın Tarihi
2022-12-31
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

In this review, the hardness, yield stress and tensile stress properties of Nano Boron Nitride, which is added to Aluminum with different production methods and different percentages, were investigated.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:Aluminum is a metal that is frequently used in the industry and stands out with its lightness.
📊
Temel Bulgular & Veri:The development of Aluminum, which has a good strength/weight ratio as a result of various alloying and production techniques, continues.
💡
Sonuç & Katkı:In this review, the hardness, yield stress and tensile stress properties of Nano Boron Nitride, which is added to Aluminum with different production methods and different percentages, were investigated.
🔬Tür:Literatür & Derleme Çalışması
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Aluminum · internal structure · nano boron nitrate

Özet

Aluminum is a metal that is frequently used in the industry and stands out with its lightness. The development of Aluminum, which has a good strength/weight ratio as a result of various alloying and production techniques, continues. While this process is being done, different production methods and nanotechnological material contribution draw attention. When the literature was scanned, it was seen that nano Boron Nitride additive made improvements to aluminum in terms of strength, hardness, weight, machinability and cost reduction. In this review, the hardness, yield stress and tensile stress properties of Nano Boron Nitride, which is added to Aluminum with different production methods and different percentages, were investigated.

Abstract

Aluminum is a metal that is frequently used in the industry and stands out with its lightness. The development of Aluminum, which has a good strength/weight ratio as a result of various alloying and production techniques, continues. While this process is being done, different production methods and nanotechnological material contribution draw attention. When the literature was scanned, it was seen that nano Boron Nitride additive made improvements to aluminum in terms of strength, hardness, weight, machinability and cost reduction. In this review, the hardness, yield stress and tensile stress properties of Nano Boron Nitride, which is added to Aluminum with different production methods and different percentages, were investigated.

🔖

Bu Makaleye Atıf Yap

ÇUBUK, H. S., ÇAVDAR, U. (2022). Investigation Of Mechanical Properties Of Nano Boron Nitride Added Aluminum Material Produced By Different Production Method. International Scientific and Vocational Studies Journal, Cilt: 6 - Sayı: 2, 51–59. https://ajindex.com/articles/868809

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (12)

  1. Başer, T. A. (2012). Alüminyum alaşımları ve otomotiv endüstrisinde kullanımı, Mühendis ve Makina, 53, 51-58
  2. Türkiye Metalurji Mühendisleri Odası (2004), ‘’Alüminyum raporu’’, Metalurji Dergisi, 137, 2-4 [3] TMMOB Maden Mühendisleri Odası, (1970, Mayıs). '’Bor Nedir’’, Madencilik Dergisi. Cilt IX, sayı. 2-3, Sf. 9-29
  3. Karakılıç, M., (2011). Ulusal bor araştırma enstitüsü (BOREN) ve bor projeleri. BOREN, Endüstriyel ilişkiler grup koordinatörlüğü, Bor Çalıştayı Sunumları, Ankara. (Websayfası:http://www.ssm.gov.tr/anasayfa/hizli/duyurular/etkinlikler/konferanslar/documents/borcalistayi/boren%20sunumu.pdf) (Erişim tarihi: 12.01.2022
  4. Angın, M.H., & Aydın, S. (2003). Bor nitrür ön fizibilite etüdü.,(Websayfası: http://www.etimaden.gov.tr) (Erişim tarihi:13.01.2022
  5. Özdemir Köklü, M. (2012). Bor içerikli nanomalzeme üretim olanaklarının araştırılması, Doktora Tezi, Dokuz Eylül Üniversitesi, Fen Bilimleri Enstitüsü
  6. Garg, P., Jamwal, A., Kumar, D., Sadasivuni, K. K., Hussain, C. M., & Gupta, P. (2019). Advance research progresses in aluminium matrix composites: manufacturing & applications. Journal of Materials Research and Technology, 8(5), 4924-4939
  7. Şenel, M. C., Gürbüz, M., & Koç, E. (2018). Alüminyum-grafen kompozit yapılarda çekme dayanımının, aşınma direncinin ve mikroyapının incelenmesi, SETSCI Conference Indexing System, 144-149 [9] Loganathan, A., Sharma, A., Rudolf, C., Zhang, C., Nautiyal, P., Suwas, S., & Agarwal, A. (2017). In-situ deformation mechanism and orientation effects in sintered 2D boron nitride nanosheets. Materials Science and Engineering: A, 708, 440-450
  8. Ramesh, K. T. (2009). Nanomaterials. In Nanomaterials. Springer, Boston, MA., A.B.D., 1-20
  9. Chopra, N. G., Luyken, R. J., Cherrey, K., Crespi, V. H., Cohen, M. L., Louie, S. G., & Zettl, A. (1995). Boron nitride nanotubes. science, 269(5226), 966-967
  10. Hwang, H.J., Barakat, N.A.M., Muzafar A. Kanjwal, M.A., Sheikh, F.A., & Hak Yong Kim, H.Y. (2010). Boron nitride nanofibers by the electrospinning technique. Macromolecular Research, 18 (6), 551-557
  11. Liu, B., Gu, Y., Ji, Y., Zheng, G., Ma, F., Wang, J.,Wu, F., Long, F.,Zhou, B., Chen, C. (2021). Thin-walled boron nitride micron square tube decorated by nanosheets: Preparation, characterization and adsorption property. Ceramics International, 47(10), 14115-14123
  12. Pakdel, A., Zhi, C., Bando, Y., & Golberg, D. (2012). Low-dimensional boron nitride nanomaterials. Materials Today, 15(6),