Dergiler / Turkish Journal of Civil Engineering / 2021 / Cilt: 32 - Sayı: 6

Optimizing Non-Linear Granular Layer Coefficients of a Flexible Pavement for Mechanistic-Empirical Method

Sayfa
11315–11336
Yayın Tarihi
2021-11-01
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

K-Ɵ model was preferred for non-linear elastic layer definition, and K1 and K2 parameters of this model were optimized.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:In recent years, mechanistic-empirical (M-E) design methods are preferred in the design of flexible pavements instead of empirical methods using equations based on the road performance tests.
📊
Temel Bulgular & Veri:In this study, mechanical analyzes of a cross-section designed with the AASHTO-93 method were performed, and service life values were calculated with different empirical transfer equations.
💡
Sonuç & Katkı:K-Ɵ model was preferred for non-linear elastic layer definition, and K1 and K2 parameters of this model were optimized.
🔬Tür:Modelleme & Sayısal Simülasyon
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Mechanistic-empirical design · AASHTO-93 method · non-linear layer coefficients

Özet

In recent years, mechanistic-empirical (M-E) design methods are preferred in the design of flexible pavements instead of empirical methods using equations based on the road performance tests. However, the calibration of transfer equations that convert mechanical responses to pavement life and the definition of layer materials used in M-E methods have great importance for M-E methods. In this study, mechanical analyzes of a cross-section designed with the AASHTO-93 method were performed, and service life values were calculated with different empirical transfer equations. The obtained M-E design results were compared with the results calculated with the AASHTO-93 method, and transfer equations compatible with the AASHTO-93 method were determined. Among the transfer equations examined, it was found that the rutting equation of the Asphalt Institute gave the most consistent results with the AASHTO-93 method. In the mechanical analysis of the selected cross-section, granular base and sub-base layers were defined as non-linear elastic reflecting the actual in-situ conditions. K-Ɵ model was preferred for non-linear elastic layer definition, and K1 and K2 parameters of this model were optimized.

Abstract

In recent years, mechanistic-empirical (M-E) design methods are preferred in the design of flexible pavements instead of empirical methods using equations based on the road performance tests. However, the calibration of transfer equations that convert mechanical responses to pavement life and the definition of layer materials used in M-E methods have great importance for M-E methods. In this study, mechanical analyzes of a cross-section designed with the AASHTO-93 method were performed, and service life values were calculated with different empirical transfer equations. The obtained M-E design results were compared with the results calculated with the AASHTO-93 method, and transfer equations compatible with the AASHTO-93 method were determined. Among the transfer equations examined, it was found that the rutting equation of the Asphalt Institute gave the most consistent results with the AASHTO-93 method. In the mechanical analysis of the selected cross-section, granular base and sub-base layers were defined as non-linear elastic reflecting the actual in-situ conditions. K-Ɵ model was preferred for non-linear elastic layer definition, and K1 and K2 parameters of this model were optimized.

🔖

Bu Makaleye Atıf Yap

BOSTANCIOĞLU, M. (2021). Optimizing Non-Linear Granular Layer Coefficients of a Flexible Pavement for Mechanistic-Empirical Method. Turkish Journal of Civil Engineering, Cilt: 32 - Sayı: 6, 11315–11336. https://ajindex.com/articles/864151

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (13)

  1. Huang, Y. H.,Pavement analysis and design. 2nd ed. Upper Saddle River, NJ: Pearson Prentice Hall, 1993
  2. Mashayekhi, M., Amini, A.A., Behbahani, H., Nobakht, S., Comparison of mechanistic-empirical and empirical flexible pavement design procedures of AASHTO: A Case Study, 5th International Conference Bituminous Mixtures and Pavements, Thessaloniki, 2011
  3. Alhasan, A., Ali, A., Offenbacker, D., Smadi, O., Lewis-Beck, C., Incorporating spatial variability of pavement foundation layers stiffness in reliability-based mechanistic-empirical pavement performance prediction, Transportation Geotechnics, 17, 1-13, 2018
  4. Carvalho, R. L.,Schwartz, C. W., Comparisons of flexible pavement designs: AASHTO empirical versus NCHRP project 1–37A mechanistic–empirical, Transportation Research Record, 1947(1), 167-174, 2006
  5. Sağlık, A.,Güngör, A.G., Highways flexible pavement design guide, Ankara, 2008
  6. Çelik, O. N.,Eyada, S. O., Assessment of flexible pavement fatigue life of Turkish typical sections using mechanistic empirical pavement design approach for coastal region, Ain Shams Engineering Journal, 10(1), 33-43, 2019
  7. Muniandy, R., Aburkaba, E., Thamer, N., Comparison of flexible pavement performance using Kenlayer and Chev PC software program, Australian Journal of Basic and Applied Sciences, 7(9), 112-119, 2013
  8. Behiry, A. E. A. E. M., Fatigue and rutting lives in flexible pavement, Ain Shams Engineering Journal, 3(4), 367-374, 2012
  9. Mousa, M. R., Abo-Hashema, M.A., Gadallah, A.A., Mousa, R.M., Evaluation of pavement performance prediction models under different traffic and climatic conditions, The Proceedings of International Conference on Asphalt Pavement Engineering and Infrastructure, London, 2015
  10. Singh, A. K.,Sahoo, J. P., Analysis and design of two layered flexible pavement systems: A new mechanistic approach, Computers and Geotechnics, 117, 103238, 2020
  11. Abd Alla, E. M., The rational use of finite element method in the analysis of flexible pavements, Journal of Engineering Sciences, Assiut University, 34(4), 1185-1211, 2006
  12. Titi, H. H., Matar, M. G., Estimating resilient modulus of base aggregates for mechanistic-empirical pavement design and performance evaluation, Transportation Geotechnics, 17, 141-153, 2018
  13. Ng, K., Henrichs, Z.R., Ksaibati, K., Wulff, S.S., Resilient modulus of subgrade materials for mechanistic-empirical pavement design guide, Road Materials and Pavement Design, 19(7), 1523-1545, 2018.