Dergiler / Turkish Journal of Civil Engineering / 2022 / Cilt: 33 - Sayı: 4

Influence of Gravity Framing on the Collapse Probability of Steel Buildings with Special Moment Frames

Sayfa
12203–12221
Yayın Tarihi
2022-07-01
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

Furthermore, the results demonstrate that gravity frames in a structure profoundly decrease the possibility of collapse.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:This paper presents the influence of gravity framing on the collapse risk of steel frame buildings with perimeter special moment frames (SMFs) designed in Turkey.
📊
Temel Bulgular & Veri:A nonlinear analytical model that simulates the hysteretic behavior of header end-plate connections is calibrated with past experimental data.
💡
Sonuç & Katkı:Furthermore, the results demonstrate that gravity frames in a structure profoundly decrease the possibility of collapse.
🔬Tür:Modelleme & Sayısal Simülasyon
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Steel structures · Gravity Framing · Nonlinear dynamic analysis

Özet

This paper presents the influence of gravity framing on the collapse risk of steel frame buildings with perimeter special moment frames (SMFs) designed in Turkey. For this, four- and eight-story buildings have been designed considering the related current specifications and codes. Header end-plate connections are used for the beam-to-column joints of the gravity frame system. A nonlinear analytical model that simulates the hysteretic behavior of header end-plate connections is calibrated with past experimental data. Nonlinear static pushover analysis (NSPA) and nonlinear response history analyses (NRHAs) were implemented for both four-story and eight-story SMFs with and without the gravity framing to quantify their collapse performance and monitor the system-level seismic response of the building through collapse. The advantage of presence of the gravity framing is investigated and differences in structural responses between the models are also examined. When the models were excited by different ground motions, median responses of the detailed models showed an increase in lateral force carrying capacity and a decrease in first-story drift demand, compared to the nonlinear static pushover analyses results. Furthermore, the results demonstrate that gravity frames in a structure profoundly decrease the possibility of collapse.

Abstract

This paper presents the influence of gravity framing on the collapse risk of steel frame buildings with perimeter special moment frames (SMFs) designed in Turkey. For this, four- and eight-story buildings have been designed considering the related current specifications and codes. Header end-plate connections are used for the beam-to-column joints of the gravity frame system. A nonlinear analytical model that simulates the hysteretic behavior of header end-plate connections is calibrated with past experimental data. Nonlinear static pushover analysis (NSPA) and nonlinear response history analyses (NRHAs) were implemented for both four-story and eight-story SMFs with and without the gravity framing to quantify their collapse performance and monitor the system-level seismic response of the building through collapse. The advantage of presence of the gravity framing is investigated and differences in structural responses between the models are also examined. When the models were excited by different ground motions, median responses of the detailed models showed an increase in lateral force carrying capacity and a decrease in first-story drift demand, compared to the nonlinear static pushover analyses results. Furthermore, the results demonstrate that gravity frames in a structure profoundly decrease the possibility of collapse.

🔖

Bu Makaleye Atıf Yap

KARASU, A., VATANSEVER, C. (2022). Influence of Gravity Framing on the Collapse Probability of Steel Buildings with Special Moment Frames. Turkish Journal of Civil Engineering, Cilt: 33 - Sayı: 4, 12203–12221. https://ajindex.com/articles/864122

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (14)

  1. Leon, R., Composite connections, Structural Engineering Handbook, CRC Press LLC, 1999.
  2. Huang, Z., and Foutch, D.A., Effect of hysteresis type on drift limit for global collapse of moment frame structures under seismic loads, Journal Earthquake Engineering, 13(7), 939-964, 2009.
  3. Lignos, D., and Krawinkler, H., Sidesway Collapse of Deteriorating Structural systems under Seismic Excitations, Report No. TB 172, John A. Blume Earthquake Engineering Center, Stanford University, CA, 2012.
  4. Gupta, A., and Krawinkler, H., Behavior of ductile SMRFs at various seismic hazard levels, Journal of Structural Engineering, 126(1), 98–107, 2000.
  5. Ramos, M.D., Mosqueda, G. and Hashemi, M.J., Large-scale hybrid simulation of a steel moment frame building structure through collapse, Journal of Structural Engineering, 142(1), 04015086, 2016.
  6. MacRae, G.A., Kimura, Y. and Roeder, C., Effect of column stiffness on braced frame seismic behavior, Journal of Structural Engineering, 130(3), 381-391, 2004.
  7. Ji, X., Kato, M., Wang, T., Hitaka, T. and Nakashima, M., Effect of gravity columns on mitigation of drift concentration for braced frames, Journal of Constructional Steel Research, 65(12), 2148-2156, 2009.
  8. Elkady, A. and Lignos, D. G., Effect of gravity framing on the overstrength and collapse capacity of steel frame buildings with perimeter special moment frames, Earthquake Engineering & Structural Dynamics, 44, 1289-1307, 2015.
  9. Lee, K. and Foutch, D. A., Performance evaluation of new steel frame buildings for seismic loads, Earthquake Engineering and Structural Dynamics, 31, 653-670, 2002.
  10. Flores, F.X., Charney, F.A. and Lopez-Garcia, D., Influence of the gravity framing system on the collapse performance of special steel moment frames, Journal of Constructional Steel Research, 101, 351-362, 2014.
  11. Foutch, D. A., and Yun, S., Modeling of steel moment frames for seismic loads, Journal of Constructional Steel Research, 58, 529-564, 2002.
  12. Astaneh-Asl, A., Modjtahedi, D., McMullin, K., Shen, J. and D’Amore, E., Stability of damaged steel moment frames in Los Angeles, Journal of Constructional Steel Research, 20, 443-446, 1998.
  13. Sizemore, J., Davaran, A., Fahnestock, L., Tremblay, R. and Hines, E., Seismic behaviour of low-ductility concentrically-braced frames, Structures Congress, ASCE Library, 2014.
  14. Karasu, A. and Vatansever, C., Experimental Study on the Behavior of Header End - Plate Connections under Cyclic Loading, Technical Journal of Turkish Chamber of civil engineers, 32(6), 2021