Dergiler / Turkish Journal of Civil Engineering / 2022 / Cilt: 33 - Sayı: 3

Ultrasonik Yöntemler ile Çelik-lif Takviyeli Betonda Eğilme Çatlaklarının Derinlik Tayini

Ultrasound based Crack Depth Estimation in Steel-fiber Reinforced Concrete

Sayfa
11903–11920
Yayın Tarihi
2022-05-01
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

Her iki tanı indeksinin de çatlak tespiti ve derinlik tahmininde faydalı oldukları görülmüştür.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:Betonda eğilme çatlaklarının derinliklerin tespit edilmesi, yapısal elemanların kalan yük taşıma kapasitelerinin tayini için önem taşımakladır.
📊
Temel Bulgular & Veri:Bu makale, bu yaklaşıma dayanarak geliştirilen tanı metodunu, 7 adet çelik-lifli beton kiriş numune (50x10x10 cm3) üzerinde gerçekleştirilmiş olan ultrasonik testler üzerinden incelemektedir.
💡
Sonuç & Katkı:Her iki tanı indeksinin de çatlak tespiti ve derinlik tahmininde faydalı oldukları görülmüştür.
🔬Tür:Araştırma Makalesi
📍Kapsam:7 adet
⚙️Değişkenler:tahribatsız muayene · çatlak derinlik ölçümü · çelik-lif takviyeli beton

Özet

Betonda eğilme çatlaklarının derinliklerin tespit edilmesi, yapısal elemanların kalan yük taşıma kapasitelerinin tayini için önem taşımakladır. Uygulamada, mevcut tahribatsız ultrasonik test yöntemleri çatlak derinliğinin tespitinden ziyade ya elemanların kalınlıklarının ölçülmesinde ya da mukavemet tayininde kullanılmaktadır. Bir cisim içinde yayılmakta olan ultrasonik dalgalar bir çatlak ile karşılaştıkları zaman dalga karakteristiklerinde değişim gözlemlenir. Bu değişimin takibi ve ölçümü ile çatlak derinliğinin tayini mümkündür. Bu makale, bu yaklaşıma dayanarak geliştirilen tanı metodunu, 7 adet çelik-lifli beton kiriş numune (50x10x10 cm3) üzerinde gerçekleştirilmiş olan ultrasonik testler üzerinden incelemektedir. Kiriş numeneler çatlak-kontrollü üç-noktalı-eğilme testi ile belli bir çatlak derinliğine ulaşılana kadar hasara uğratılmış ve akabinde gerçekleştirilen ultrasonik testler ile dalga yayılımı kaydedilmiştir. Kaydedilen dalga sinyal serileri, ayrık wavelet dönüşüm ve frekans-dalganumarası analizi gibi dijital sinyal işleme teknikleri ile analiz edilerek iki tip tanı indeksi elde edilmiştir. İlk tanı indeksi malzeme sönüm katsayısı α, dalga sönümünü; diğer tanı indeksi ‘dağılım indeksi DI’ ise, dalgaların faz hızındaki dağılımı temsil etmektedir. Her iki tanı indeksinin de çatlak tespiti ve derinlik tahmininde faydalı oldukları görülmüştür.

Abstract

Estimation of the depth of surface-breaking cracks caused by bending in concrete has crucial importance in order to predict the remaining load capacity of a structural member. In practice, ultrasonic tests are the most commonly used non-destructive methods to assess the condition of concrete. However, the commercial ultrasound-based methods focus on the estimation of thickness of the structural element rather than the crack depth. The cracks cause dispersion and attenuation in the propagating waves, and thus by monitoring the changes in these wave characteristics, diagnostic indexes correlated with the crack depth can be defined. This paper explains this approach through the tests performed on seven laboratory-scale steel-fiber reinforced concrete beams (50x10x10 cm3). The beams are loaded under the crack-controlled three-point bending test until a specific crack depth is reached. These beams are then subjected to ultrasonic testing to acquire the propagating surface waves. The recorded signals are analysed by utilizing signal processing techniques, including discrete wavelet transform and frequency-wavenumber analysis in order to extract two diagnostic features, namely, material attenuation coefficient and dispersion index. It is shown that both diagnostic features are able to detect the crack and estimate its depth.

🔖

Bu Makaleye Atıf Yap

KIRLANGIÇ, A. S. (2022). Ultrasonik Yöntemler ile Çelik-lif Takviyeli Betonda Eğilme Çatlaklarının Derinlik Tayini. Turkish Journal of Civil Engineering, Cilt: 33 - Sayı: 3, 11903–11920. https://ajindex.com/articles/864113

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (6)

  1. ASTM C597-16. (2016) Standard Test Method for Pulse Velocity Through Concrete. ASTM International, West Conshohocken, PA. ACI 228.2R-13. (2013) Report on Nondestructive Test Methods for Evaluation of Concrete in Structure‪s. ACI Committee 228‬‬‬‬ Daniels, D. J. (2004). Ground Penetrating Radar. Institution of Engineering and Technology. ACI Committee 222R-01. (2010). Protection of metals in concrete against corrosion, American Concrete Institute, Farmington Hills, MI. Song, W., Popovics, J. S., Aldrin, J. C., and Shah, S. P. (2003). Measurement of surface wave transmission coefficient across surface-breaking cracks and notches in concrete. Journal of the Acoustical Society of America, 113(2), 717-725. doi:10.1121/1.1537709 Tallavo, F., Cascante, G., and Mahesh, P. (2009). Experimental and Numerical Analysis of MASW Tests for Detection of Buried Timber Trestles: Soil Dynamics and Earthquake Engineering, 29(1), 91-102.
  2. Nasseri-Moghaddam A., Phillips C., Cascante G., and Hutchinson J. (2007). Effects of underground cavities on Rayleigh waves-numerical and experimental study. Soil Dyn Earthquake Eng, 27(4), 3000-13.
  3. Hassan, A., Nasseri-Moghaddam, A., and Cascante, G. (2011). Use of numerical simulation for the identification of underground voids using the MASW test: in Proceedings: 14th PanAm CGS Geotechnical Conference. Kirlangic, A. S., Cascante, C., and Polak, M. (2016). Assessment of concrete beams with irregular defects using surface waves. ACI Materials, 113(1), 73-81. Rodríguez-Roblero, M. J., Ayon, J. J., Cascante, G., Pandey, M. D., Alyousef, R., and Topper, T. (2019). Application of correlation analysis techniques to surface wave testing for the evaluation of reinforced concrete structural elements: NDT and E International, 102, 68-76. doi:10.1016/j.ndteint.2018.11.003. Aggelis, D. G., Shiotani, T., and Polyzos, D. (2009). Characterization of surface crack depth and repair evaluation using Rayleigh waves. Cement & Concrete Composites, 31 (1), 77–83.
  4. Zerwer, A., Polak, M., and Santamarina, J. C. (2003). Rayleigh Wave Propagation for the Detection of Near Surface Discontinuities: Finite Element Study. Journal of Nondestructive Evaluation, (22)2, 39-52.
  5. Zerwer, A., Polak, M., and Santamarina, J. C. (2005) Detection of Surface Breaking Cracks in Concrete Members Using Rayleigh Waves. Journal of Environmental & Engineering Geophysics, 10(3), 295-306.
  6. Yang, Y., Cascante, G., and Polak, M. (2009). Depth detection of surface-breaking cracks in concrete plate