Dergiler / Turkish Journal of Civil Engineering / 2022 / Cilt: 33 - Sayı: 5

Modification in Response of a Bridge Seismically Isolated with Lead Rubber Bearings Exposed to Low Temperature

Sayfa
12553–12576
Yayın Tarihi
2022-09-01
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

Moreover, using property modification factor will result in accurately estimated isolator displacements, but overestimated isolator forces, in an average sense.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:This study investigates the response modification in a bridge seismically isolated with lead rubber bearings (LRBs), due to change of ambient temperature from 20oC to -30oC.
📊
Temel Bulgular & Veri:Then, verified analytical representation of LRB was employed in nonlinear response history analyses conducted to quantify the change in response of a representative LRB isolated bridge when subjected to bidirectional ground motion excitations at 20°C and -30°C.
💡
Sonuç & Katkı:Moreover, using property modification factor will result in accurately estimated isolator displacements, but overestimated isolator forces, in an average sense.
🔬Tür:Modelleme & Sayısal Simülasyon
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Seismic isolation · Lead rubber bearing · Low temperature

Özet

This study investigates the response modification in a bridge seismically isolated with lead rubber bearings (LRBs), due to change of ambient temperature from 20oC to -30oC. Accordingly, a large-size LRB was tested after conditioned at corresponding temperatures and change in its hysteretic properties was noted. Use of analytical tool in modeling nonlinear response of the tested LRB was justified by comparing the experimentally and analytically obtained force-displacement curves. Then, verified analytical representation of LRB was employed in nonlinear response history analyses conducted to quantify the change in response of a representative LRB isolated bridge when subjected to bidirectional ground motion excitations at 20°C and -30°C. Analyses results are also employed to assess the use of property modification factor, , to change isolator properties in order to represent low temperature behavior. It is revealed that for the selected ground motion records, the average isolator force remains almost the same for both ambient temperatures. Moreover, using property modification factor will result in accurately estimated isolator displacements, but overestimated isolator forces, in an average sense.

Abstract

This study investigates the response modification in a bridge seismically isolated with lead rubber bearings (LRBs), due to change of ambient temperature from 20oC to -30oC. Accordingly, a large-size LRB was tested after conditioned at corresponding temperatures and change in its hysteretic properties was noted. Use of analytical tool in modeling nonlinear response of the tested LRB was justified by comparing the experimentally and analytically obtained force-displacement curves. Then, verified analytical representation of LRB was employed in nonlinear response history analyses conducted to quantify the change in response of a representative LRB isolated bridge when subjected to bidirectional ground motion excitations at 20°C and -30°C. Analyses results are also employed to assess the use of property modification factor, , to change isolator properties in order to represent low temperature behavior. It is revealed that for the selected ground motion records, the average isolator force remains almost the same for both ambient temperatures. Moreover, using property modification factor will result in accurately estimated isolator displacements, but overestimated isolator forces, in an average sense.

🔖

Bu Makaleye Atıf Yap

ÇAVDAR, E., ÖZDEMİR, G., KARUK, V. (2022). Modification in Response of a Bridge Seismically Isolated with Lead Rubber Bearings Exposed to Low Temperature. Turkish Journal of Civil Engineering, Cilt: 33 - Sayı: 5, 12553–12576. https://ajindex.com/articles/864098

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (15)

  1. Skinner, R.I., Robinson, W.H., McVerry, G.H., An Introduction to Seismic Isolation. Chichester: John Wiley & Sons, 1993.
  2. Naeim, F., Kelly J., Design of Seismic Isolated Structures: From Theory to Practice. New York: John Wiley & Sons, 1999.
  3. Kunde, M.C., Jangid, R.S., Seismic Behavior of Isolated Bridges: A-state-of-the-art review. Electronic Journal of Structural Engineering, 3, 140–170, 2003.
  4. Robinson, W.H., Lead Rubber Hysteretic Bearings Suitable for Protecting Structures During Earthquake. Earthquake Engineering and Structural Dynamics, 10(4), 593–604, 1982.
  5. Nagarajaiah, S., Sun, X., Response of Base Isolated USC Hospital Building in Northridge Earthquake. Journal of Structural Engineering (ASCE), 126(10), 1177-1186, 2000.
  6. Roeder, C.W., Proposed Design Method for Thermal Bridge Movements. Journal of Bridge Engineering, 8(1), 12-19, 2003.
  7. Constantinou, M.C., Whittaker, A.S., Kalpakidis, Y., Fenz, D.M., Warn, G.P., Performance of Seismic Isolation Hardware Under Service and Seismic Loading, Technical report, NY: MCEER=07-2012, Buffalo, 2007.
  8. Benzoni, G., Casarotti, C., Effects of Vertical Load, Strain Rate and Cycling on The Response of Lead-Rubber Seismic Isolators. Journal of Earthquake Engineering, 13(3), 293-312, 2009.
  9. Erdoğdu, H., Çavdar, E., Özdemir, G., Türk Deprem Yönetmelikleri (DBYBHY ve TBDY) Spektrum Tanımlarının Deprem Yalıtım Sistemi Tasarımı Özelinde Karşılaştırılması. Teknik Dergi, 32(5), 2021.
  10. Pinarbasi, S., Akyuz, U., Sismik İzolasyon ve Elastomerik Yastik Deneyleri. İMO Teknik Dergi, 237, 3581-3598, 2005.
  11. Roeder, C.W., Stanto, J.F., Taylor A.W., Performance of Elastomeric Bearings (No. 298). Washington, DC: National Cooperative Highway Research Program, Transportation Research Board, 1987.
  12. Ritchie, D.F., Neoprene Bridge Bearing Pads, Gaskets and Seals. Rubber World, Lippincott & Petto Inc. 200(2), 27–31, 1989.
  13. Eyre, R., Stevenson, A., Performance of Elastomeric Bridge Bearings at Low Temperatures. Proceedings 3rd World Congress on Joint Sealing and Bearing Systems for Concrete Structures, 736-762.
  14. Toronto, Canada, 1991.
  15. Yakut, A., Yura, J.A., Evaluation of Low-Temperature Test Methods for Elastomeric Bridge Bearings. Journal of Bridge Engineering, 7(1), 50-56, 2002(a). Yakut, A., Yura. J.A., Parameters Influencing Performance of Elastomeric Bearings at Low Temperatures. Journal of Structural Engineering, 128(8), 986–994., 2002(b). Fuller, K.N.G., Gough, J., Thomas, A.G., The Effect of Low-Temperature Crystallization on The Mechanical B