Dergiler / Eurasian Journal of Civil Engineering and Architecture / 2019 / Cilt: 3 - Sayı: 2

EFFECT OF LIME ON UNCONFINED COMPRESSIVE STRENGTH OF A LOW PLASTICITY CLAYEY SOIL

Sayfa
32–40
Yayın Tarihi
2019-12-01
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

For 28 days, soaked UCS of the samples prepared with 4% optimum lime content decreased by approximately 50% according to unsoaked condition

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:The performance of the superstructure in the transportation structures (railway, highway etc.) is directly affected by the characteristics of subgrade.
📊
Temel Bulgular & Veri:The aim of this study is to investigate the effect of lime on the unconfined compressive strength (UCS) of a low plasticity clayey soil under different curing time (0, 1, 7 and 28 days) and different curing conditions (in a desiccator and soaked).
💡
Sonuç & Katkı:For 28 days, soaked UCS of the samples prepared with 4% optimum lime content decreased by approximately 50% according to unsoaked condition
🔬Tür:Araştırma Makalesi
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Lime · stabilization · compressive strength

Abstract

The performance of the superstructure in the transportation structures (railway, highway etc.) is directly affected by the characteristics of subgrade. However, it is not always possible to find the desired quality subgrade soil in the areas where both highway and railway routes. In such cases, it is an option to improve the problematic soils in place by using additives (lime, cement etc.). The aim of this study is to investigate the effect of lime on the unconfined compressive strength (UCS) of a low plasticity clayey soil under different curing time (0, 1, 7 and 28 days) and different curing conditions (in a desiccator and soaked). Firstly, geotechnical tests (classification and compaction) were conducted to determine properties of soil. UCS test samples at five different lime contents (2%, 3%, 4%, 5% and 6% by weight) were prepared and cured in desiccator. Then UCS test was conducted immediately at the end of the curing time. On the other hand, the optimum lime content by weight was determined as 4 % by using the pH method. After curing time in the desiccator, the samples prepared with optimum lime content were soaked in water for 4 days and then UCS test was carried out. As a result, with the addition of lime, maximum dry density values decreased, optimum water content values increased. UCS significantly increased with both lime content and curing time. For 28 days, soaked UCS of the samples prepared with 4% optimum lime content decreased by approximately 50% according to unsoaked condition

🔖

Bu Makaleye Atıf Yap

KARASAHİN, M., KESKİN, E., ŞAHİNOĞLU, İ. (2019). EFFECT OF LIME ON UNCONFINED COMPRESSIVE STRENGTH OF A LOW PLASTICITY CLAYEY SOIL. Eurasian Journal of Civil Engineering and Architecture, Cilt: 3 - Sayı: 2, 32–40. https://ajindex.com/articles/830534

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (8)

  1. ASTM D422-63e2 (2007). Standard Test Method for Particle-Size Analysis of Soils, ASTM International, West Conshohocken, PA, 2007, www.astm.org ASTM D4318-17e1 (2017). Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils, ASTM International, West Conshohocken, PA, 2017, www.astm.org ASTM D854-14, (2014). Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer, ASTM International, West Conshohocken, PA, 2014, www.astm.org ASTM D1557-12e1 (2012). Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft3 (2,700 kN-m/m3)), ASTM International, West Conshohocken, PA, 2012, www.astm.org ASTM D6276-19 (2019). Standard Test Method for Using pH to Estimate the Soil-Lime Proportion Requirement for Soil Stabilization, ASTM International, West Conshohocken, PA, 2019, www.astm.org ASTM D2487-17 (2017) Standard Practice for Classification of Soils for Engineering Purposes (Unified Soil Classification System), ASTM International, West Conshohocken, PA, 2017, www.astm.org ASTM C977-18 (2018). Standard Specification for Quicklime and Hydrated Lime for Soil Stabilization, ASTM International, West Conshohocken, PA, 2018, www.astm.org ASTM D2166 / D2166M-16 (2016). Standard Test Method for Unconfined Compressive Strength of Cohesive Soil, ASTM International, West Conshohocken, PA, 2016, www.astm.org Al-Mukhtar, M., Lasledj, A., Alcover, J.F., (2010). “Behaviour and mineralogy changes in lime-treated expansive soil at 20 °C.” Applied Clay Science 50 (2010), 191–198.
  2. Al-Mukhtar, M., Khattab, S. and Alcover, J.F. (2012). “Microstructure and geotechnical properties of lime-treated expansive clayey soil.” Engineering Geology 139-140 (2012) 17–27.
  3. Al-Mukhtar, M., Lasledj, A. and Alcover, J.F. (2014). “Lime consumption of different clayey soils.” Applied Clay Science 95 (2014) 133–145.
  4. Athanasopoulou, A. (2014). “Addition of Lime and Fly Ash to Improve Highway Subgrade Soils.” J. Mater. Civ. Eng., 2014, 26(4): 773-775.
  5. Bell, F.G., (1996). “Lime stabilization of clay minerals and soils.” Eng. Geol. 42 (4), 223–237.
  6. Bell, F.G.(1989). “Lime stabilization of clay soils.” Bulletin of the International Association of Engineering Geology, 39, 67–74.
  7. Bozbey, I. and Garaisayev, S. (2010). “Effects of soil pulverization quality on lime stabilization of an expansive clay.” Environ Earth Sci (2010)60,1137–1151.
  8. Connelly, J., Jensen, W., Harmon, P. (2008). “Proctor Compaction Testing”. Nebr