Döküm Mg+%15Al12Si alaşımının mikroyapı ve sertlik incelemesi

Kaynakça (1)

1. . Froes, F., D. Eliezer, and E. Aghion, "The science, technology, and applications of magnesium", The Journal of The Minerals, Metals & Materials Society (TMS), 50, 30, 1998 [2]. Mordike, B. and T. Ebert, "Magnesium: properties—applications—potential", Materials Science and Engineering: A, 302, 37-45, 2001 [3]. Wang, Q., et al., "Effect of Sb on the microstructure and mechanical properties of AZ91 magnesium alloy", Metallurgical and Materials Transactions A, 32, 787-794, 2001 [4]. Unal, M., An investigation of casting properties of magnesium alloys, in Metallurgical Engineering. 2008, Gazi University: Ankara, Turkey. p. 138. [5]. Chakraborti, N. and H. Lukas, "Thermodynamic optimization of the Mg-Al-Si phase diagram", Calphad, 16, 79-86, 1992 [6]. Çiçek, B., H. Ahlatçı, and Y. Sun, "Wear behaviours of Pb added Mg–Al–Si composites reinforced with in situ Mg2Si particles", Materials & Design, 50, 929, 2013 [7]. Miao, J., et al., "Interphase boundary segregation of silver and enhanced precipitation of Mg17Al12 Phase in a Mg-Al-Sn-Ag alloy", Scripta Materialia, 154, 192-196, 2018 [8]. Korgiopoulos, K., B. Langelier, and M. Pekguleryuz, "Mg17Al12 Phase Refinement and the Improved Mechanical Performance of Mg-6Al alloy with trace Erbium Addition", Materials Science and Engineering: A, 141075, 2021 [9]. Çiçek, B., "Mg2Si Partikül Takviyeli Mg Alaşımlarının Aşınma ve Korozyon Özelliklerinin İncelenmesi", KÜ Fen Bilimleri Enstitüsü, Yüksek Lisans Tezi, 2011 [10]. Çiçek, B. and Y. Sun, "A study on the mechanical and corrosion properties of lead added magnesium alloys", Mater. Design, 37, 369, 2012 [11]. Herrmann, K., Hardness testing: principles and applications. 2011: ASM international. [12]. Kannan, M.B., E. Koc, and M. Unal, "Biodegradability of β-Mg17Al12 phase in simulated body fluid", Materials letters, 82, 54-56, 2012 [13]. Anstis, G., et al., "A critical evaluation of indentation techniques for measuring fracture toughness: I, direct crack measurements", Journal of the American Ceramic Society, 64, 533-538, 1981 [14]. Roebuck, B., et al., Palmqvist toughness for hard and brittle materials. 1998: National Physical Laboratory. [15]. TOPUZ, P., et al., "Borlanmış AISI 316 Üzerinde Oluşmuş FexB Tabakalarının Kırılma Tokluklarının İncelenmesi", Journal of Steel Research and Development, 12, 16, 2020 [16]. Elen, L., et al., "Effects of alloying element and cooling rate on properties of AM60 Mg Alloy", Materials Research Express, 2019 [17]. Cicek, B., T. Aydogmu